Installation Manual for SMX Modules - OEM Automatic AB

Installation Manual
16 Encoder types
SMX 11 / SMX 12 in 2-axis operation
Type Encoder A Encoder B Disabled Modes Configurable Entry Info field
Type
Pulse Enable Type Pulse Enable
axis Fault exclusion/comment Pl
multiple direction
multiple direction
0 NC 0 No NC 0 No all 1 and 2 B
1 Incremental 2 No NC 2 No ZSC, DMC, ELC,
OLC,
PSC(position),JS
S
1 and 2 Fault exclusion mech. shaft breakage,
positive encoder shaft connection
required.
d
2 SINCOS 4 Yes NC 4 No ELC, OLC,
PSC(position)
3 Incremental 2 Yes Proxi sw.
1 count. inp.
4 SINCOS 4 Yes Proxi sw.
1 count. inp.
5 Incremental 4 Yes Proxi sw.
2 count. inp.
w. 90° - signal
6 SINCOS 4 Yes HTL/incremen
tal
7 SSI 1 Yes Proxi sw.
1 count. inp.
8 SSI 1 Yes Proxi sw.
2 count. inp.
w. 90° - signal
9 Proxi sw. 1 No Proxi sw.
1 count. inp.
1 count. inp.
10 Proxi sw.
2 count. inp.
w. 90° - signal
4 Yes Proxi sw.
2 count. inp.
w. 90° - signal
1 No ZSC,DMC,JSS,E
LC, OLC,
PSC(position)
1 No ELC, OLC,
PSC(position)
4 Yes ELC, OLC,
PSC(position)
1 and 2 Fault exclusion mech. shaft breakage,
positive encoder shaft connection
required.
1 and 2 e
1 and 2 (not implemented in phase 1) e
1 e
4 Yes ELC, OLC,
PSC(position)
1 e
1 No 1 (not implemented in phase 1) d
4 Yes 1 e
1 No ZSC, DMC, ELC,
OLC,JSS,
PSC(position)
4 Yes ELC, OLC,
PSC(position)
1 d
1 d
d
HB-37350-810-01-10E-EN SMX installation manual.doc Page 87 of 87