Installation Manual for SMX Modules - OEM Automatic AB

Installation Manual
Alarm code A 3507 / A 3508
Fault message Read head fault WCS encoder system axis 1
Cause • WCS read head has detected a fault
Remedy • Read out fault types from WCS encoder system
Alarm code A 4001 / A 4002
Alarm message
Cause
Remedy
CCW and CW rotation monitoring DMC1 activated at the same time
Multiple activation
In programming make sure that only one "Enable" is activated
Alarm code A 4003 / A 4004
Alarm message
Cause
Remedy
CCW and CW rotation monitoring DMC2 activated at the same time
Multiple activation
In programming make sure that only one "Enable" is activated
Alarm code A 4601 / A 4602
Alarm message
Cause
Remedy
Monitoring range left and right of OLC1 activated at the same time
Multiple activation
In programming make sure that only one "Enable" is activated
Alarm code A 4603 / A 4604
Alarm message
Cause
Remedy
Monitoring range left and right of OLC2 activated at the same time
Multiple activation
In programming make sure that only one "Enable" is activated
Alarm code A 4605 / A 4606
Alarm message
Cause
Remedy
OLC1 Teach In status fault
SET and QUIT input have a faulty switching sequence
Check input configuration
Check switching sequence
Alarm code A 4607 / A 4608
Alarm message
Cause
Remedy
OLC2 Teach In status fault
SET and QUIT input have a faulty switching sequence
Check configuration
Check switching sequence
Alarm code A 4609 / A 4610
Alarm message
Cause
Remedy
OLC1 Teach In position fault
Teach In position outside measuring range
Check transfer position
HB-37350-810-01-10E-EN SMX installation manual.doc Page 73 of 73