Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Manual</strong><br />
Alarm code A 3133 / A 3134<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI9<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3135 / A 3136<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI10<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3137 / A 3138<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI11<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3139 / A 3140<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI12<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3141 / A 3142<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI13<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3143 / A 3144<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI14<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3147 / A 3148<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse2 plausibility fault on input DI9<br />
Configured Pulse2 voltage not applied to this input.<br />
• Check the configuration of the digital input DI9 acc. to planning<br />
and circuit diagram<br />
• Check wiring<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 65 of 65
Change language