Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Manual</strong><br />
Alarm code A 3105 / A 3106<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI3<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3107 / A 3108<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI4<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3109 / A 3110<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI5<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3111 / A 3112<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI6<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3113 / A 3114<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI7<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3115 / A 3116<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse1 plausibility fault on input DI8<br />
Configured Pulse1 voltage not applied to this input.<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
Alarm code A 3117 / A 3118<br />
Alarm message<br />
Cause<br />
Remedy<br />
Pulse2 plausibility fault on input DI1<br />
No Pulse2 voltage applied to this input<br />
• Check the configuration of the digital input acc. to planning and<br />
circuit diagram<br />
• Check wiring<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 63 of 63