Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Installation</strong> <strong>Manual</strong><br />
The test function <strong>for</strong> the outputs is per<strong>for</strong>med <strong>for</strong> group and individual control. The auxiliary<br />
outputs are not tested.<br />
The outputs can be loaded as follows:<br />
Output Voltage Current<br />
K1, K2 24 VDC 2.0 A<br />
K1, K2 230 VAC 2.0 A<br />
O.1, O.2 24 VDC 100 mA<br />
DO.0_P,<br />
DO.1_P<br />
DO.0_M,<br />
DO.1_M<br />
24 VDC 250 mA<br />
GNDEXT<br />
250 mA<br />
Note:<br />
For safety related applications only external switching elements with a minimum<br />
withstand current of > 1.2mA may be used.<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 37 of 37
Change language