Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual for SMX Modules - OEM Automatic AB Installation Manual for SMX Modules - OEM Automatic AB
Installation Manual • CAN-communication in connection with the SMX5x for diagnose via backplane bus system Mounting on top hat rail 3.1.5 SMX51 Type designation Device design Design of module with the following periphery: 1 CAN-BUS interface 1 Backplane bus interface 1 Status LED for operating status 1 Status LED CAN-communication Characteristics of the module: • CAN communication module • Use as insecure signal channel with CAN interface • CAN-communication via backplane bus system, mounting on top hat rail HB-37350-810-01-10E-EN SMX installation manual.doc Page 12 of 12
Installation Manual 3.1.6 Type plate The type plate is located on the left side wall of the module and contains the following information: Type designation Part number Serial number Identification of hardware release Identification of software release Safety category Input characteristics Output characteristics Type plate SMX12 (image enlarged) 3.2 Scope of delivery The scope of delivery contains: SMX module: • Plug for all signal terminals without encoder connection Not included in the scope of delivery: • SafePLC configuration software CD with ‣ Installation manual ‣ Programming manual ‣ Driver for programming adapter • Programming adapter • Licence key (USB-Dongle) for SafePLC • System CD with manuals • Backplane bus plug (SMX31 and use of monitoring module) HB-37350-810-01-10E-EN SMX installation manual.doc Page 13 of 13
- Page 1 and 2: Installation Manual Installation Ma
- Page 3 and 4: Installation Manual 9 SAFETY RELEVA
- Page 5 and 6: Installation Manual 1.2 Co-valid do
- Page 7 and 8: Installation Manual 2 Safety regula
- Page 9 and 10: Installation Manual 3.1.2 SMX11 Typ
- Page 11: Installation Manual 3.1.4 SMX12A Ty
- Page 15 and 16: Installation Manual 4.2 Installatio
- Page 17 and 18: Installation Manual 4.4 External 24
- Page 19 and 20: Installation Manual 4.6 Connection
- Page 21 and 22: Installation Manual Note: • In th
- Page 23 and 24: Installation Manual 2. Single-chann
- Page 25 and 26: Installation Manual 4.8 Connection
- Page 27 and 28: Installation Manual Attention: The
- Page 29 and 30: Installation Manual 6.2 Connection
- Page 31 and 32: Installation Manual 6.4 Connection
- Page 33 and 34: Installation Manual 8 Sensor type A
- Page 35 and 36: Installation Manual For application
- Page 37 and 38: Installation Manual The test functi
- Page 39 and 40: Installation Manual 10.1.2 Single-p
- Page 41 and 42: Installation Manual 10.1.4 Single-p
- Page 43 and 44: Installation Manual 10.1.6 Wiring o
- Page 45 and 46: Installation Manual 10.2.2 Wiring t
- Page 47 and 48: Installation Manual Response times
- Page 49 and 50: Installation Manual 11 Start-up 11.
- Page 51 and 52: Installation Manual 11.4 Terminal a
- Page 53 and 54: Installation Manual 12 Safety relat
- Page 55 and 56: Installation Manual 14 Technical da
- Page 57 and 58: Installation Manual 15.2 Alarm list
- Page 59 and 60: Installation Manual Alarm code A 30
- Page 61 and 62: Installation Manual Alarm code A 30
<strong>Installation</strong> <strong>Manual</strong><br />
3.1.6 Type plate<br />
The type plate is located on the left side wall of the module and contains the following<br />
in<strong>for</strong>mation:<br />
Type designation<br />
Part number<br />
Serial number<br />
Identification of hardware release<br />
Identification of software release<br />
Safety category<br />
Input characteristics<br />
Output characteristics<br />
Type plate <strong>SMX</strong>12 (image enlarged)<br />
3.2 Scope of delivery<br />
The scope of delivery contains:<br />
<strong>SMX</strong> module:<br />
• Plug <strong>for</strong> all signal terminals without encoder connection<br />
Not included in the scope of delivery:<br />
• SafePLC configuration software CD with<br />
‣ <strong>Installation</strong> manual<br />
‣ Programming manual<br />
‣ Driver <strong>for</strong> programming adapter<br />
• Programming adapter<br />
• Licence key (USB-Dongle) <strong>for</strong> SafePLC<br />
• System CD with manuals<br />
• Backplane bus plug (<strong>SMX</strong>31 and use of monitoring module)<br />
HB-37350-810-01-10E-EN <strong>SMX</strong> installation manual.doc Page 13 of 13