D A T A - OEM Automatic AB

Product
D A T A
Data sheet No. DS0120000 EN
2009 • version 2.8
Camera CCC SLR
Article no. 01200*0
Orlaco Products - PO Box 193 - 3770 AD Barneveld - The Netherlands
Phone: +31 (0) 342 404 555 - Fax: +31 (0) 342 404 556 - E-mail: info@orlaco.nl - Internet: www.orlaco.com

Technical Specifications
Camera CCC SLR
Overhead
Horizontal
Article number 0120000 0120010 0120020 R = 50mm 0120030 0120040 0120050
0150200
∅6,5mm
Description CCC 102° CCC 78° CCC 54° CCC 32° CCC 17° CCC 115°
Min. bend radius = 50mm
Lens specified 102° 78° 54° 32° 17° 115°
Horizontal lens angle 95° 70º 52º 33º 25 15° 115º
Vertical lens angle 71º 53º Recommendation: 39º The bracket 25º should be tightened 11° with 86º
Sensor element Colour ¼" CCD image sensor. a torque of 11 Nm ± 1 Nm (Equal to the preferred torque
Picture Verticalelements
Sloping 542 surfaces (H) x 586 (V), resolution for an 380 M6 TVL bolt. / 470TVL (enhanced).
T.V. system
PAL Standard, 1Vtt composite video into 75 Ohm.
Light sensitivity 0,5 Lux, f1,2, 5600°K.
Housing
Anodised aluminium, black, UV resistant, light fastness >8, corrosion proof according IEC 60068-2-52 salt mist
cyclic.
Ingress protection IP68 according to IEC 60529 (up to 10m under water). Camera housing can withstand high pressure cleaning
with water; 14-16L/min. 80°C and 100 bars flow. 55
1000mm
Nitrogen filled Filled with overpressure 1 bar. M6 x 20
Lens glass
SLR Glass: Patented lens glass technology darkening/lightening itself under low light/sunlight exposure from
verhead
Horizontal ±10% to ±75% in full -40°C to +85°C temperature range.
Shock constancy Shock and vibration resistant
R = 50mm
for usage on trucks, cranes, fork-lift trucks, maritime applications, machinery:
According to IEC 60068-2-27 shock test.
∅6,5mm
Vibration 0,5mtest 30G, 11 ms and Min. vibration bend radius test = 50mm frequency (Hz): 5 to 1000, PSD (g²/Hz) 0,02 to 0,7.
Camera bracket Camera bracket is made of glass reinforced polyamide, survives torque test: 50 Nm@-40°C to +85°C.
Mounting hardware Standard stainless steel.
25
Weight
0,21kg, 0,29kg. Recommendation: in standard packing. The bracket should be tightened with
Truck use Is able to withstand
a torque
all
of
fluids
11 Nm
and
± 1
materials
Nm (Equal
used
to the
in
preferred
and around
torque
trucks like: ammonia solution 5%, ethanol 80-
Vertical
Sloping surfaces
for an M6 bolt.
100%, isopropanol 5-10%, soapy water, Lock (min. the 50% connection soap by per screwing volume), alkaline degreasing compounds,
(used in high pressure washing equipment). the ring nuts.
Power input
Stabilised 12V/DC +/- 1,5V.
Power consumption Heating off: 75mA 0,9W, heating on: 270mA 2,6W.
Heating
1 x 2,0 W heating, including demister, heating auto-activated at +15°C.
Inrush current At -40°C: 0,75A 1,0 ms, at >+15°C: 0,5A 0,4 ms.
Operating temperature -40°C to +85°C.
1000mm
Cable/Connectors 0,5 m cable with 4 pins male connector (camera power-input and video-output).
Approvals
EMC in compliance with 72/245EC, 2006/28/EC.
Min. cable bend radius 50mm.
0,5m
Vaseline
Vaseline
55
M6 x 20
0,5m
outside cabin
inside cabin
Example of
M6 x 20
monitor picture
by means of
Orlaco camera
with SLR Lens
R = 50mm
glass.
(Actual Lock results Min. the bend connection by screwing
may vary). radius the ring = 50mm nuts.
25
0,5 m
55
19
∅6,5mm
Units in mm
Example of
monitor picture
by means of
camera without
SLR Lens glass.
(Actual results
may vary).
∅19mm
Installation
rubber grommet
Soldering side of male
connector (1312001)
2 3
abin
inside cabin
Universal camera Bracket
0,5m
All data subject to change without notice. All dimensions are for commercial purpose only.
The camera/display systems from Orlaco comply with the latest CE, ADR, EMC and mirror-directive regulations.
All products are manufactured in accordance with the ISO 9001-2000 quality management system, ISO 14001
environmental management systems and all Ex products with the IECEx scheme and ATEX directives.
∅19mm
rubber grommet
Overhead
Vertical
Horizontal
Sloping surfaces
Camera attachment and dimensions
Min. bend Min. bend
radius = radius 50mm= 50mm
25
M6 x 20 M6 x 20
R = 50mm R = 50mm
25
55
0,5 m
1m
55
19
19
∅6,5mm ∅6,5mm
1 2
4 3
Units Units in mm in mm
1
1 = Coax core
2 = Coax screen
3 = Red
4 = White
Shielding
NOTE: The camera can operate
in mirror-mode.
Mirror-mode: Connect the
orange wire to R pin = 50mm 3 red (+ 12V/
DC).
Normal-mode: Connect the
orange wire to pin 4 white (0V).
Units in mm 25
www.orlaco.com
4
(Video signal)
(Video GND)
(12V/DC )
(0V) M6 x 20
N.C.
55
∅6,5mm