Updating Your Firmware - OCZ Technology
Updating Your Firmware - OCZ Technology Updating Your Firmware - OCZ Technology
APPENDIX III. SATA Power and data cable connection (Notebook is different) SATA POWER Cable SATA DATA Cable *For Notebook users, please refer to the manufacturer’s notebook manual for the disk drive location.
Firmware Revision History • Version 0112 • Version 1199 • Internal "write join" was implemented for better performance • SMART basic features can be performed without error log monitoring (to reduce overhead of log data collection) • ATA power management commands (IDLE, STANDBY, SLEEP) are enabled for compatibility (Actually these are dummy, while SATA based Power Management is fully supported) • Bug fix for power management • Bug fix for internal data processing error • Bug fix for run‐time bad block handling • Bug fix for PIO mode data transfer • Bug fix for re‐worked NAND handling • Version 1275 • Performance is improved when drive is installed on RAID0 mode host • Maximum LBA number is modified according to the JEDEC standard • Modifications of internal data structure used by FW (stamp) • Bug fix for “write join” implementation • Bug fix for FPDMA transfer mode • Bug fix for firmware update
- Page 1 and 2: Updating Your Firmware WARNING: Thi
- Page 3 and 4: 4. The folder should contain the fo
- Page 5 and 6: 10. To exit the program, press “C
- Page 7: APPENDIX I (top), II (bottom) Firmw
<strong>Firmware</strong> Revision History<br />
• Version 0112<br />
• Version 1199<br />
• Internal "write join" was implemented for better performance<br />
• SMART basic features can be performed without error log monitoring<br />
(to reduce overhead of log data collection)<br />
• ATA power management commands (IDLE, STANDBY, SLEEP) are enabled for compatibility<br />
(Actually these are dummy, while SATA based Power Management is fully supported)<br />
• Bug fix for power management<br />
• Bug fix for internal data processing error<br />
• Bug fix for run‐time bad block handling<br />
• Bug fix for PIO mode data transfer<br />
• Bug fix for re‐worked NAND handling<br />
• Version 1275<br />
• Performance is improved when drive is installed on RAID0 mode host<br />
• Maximum LBA number is modified according to the JEDEC standard<br />
• Modifications of internal data structure used by FW (stamp)<br />
• Bug fix for “write join” implementation<br />
• Bug fix for FPDMA transfer mode<br />
• Bug fix for firmware update
Change language