TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com TOYOTA Intelligent Tester User Manual - Obd2be.com
4 Diagnostics Functions How to use the optional accessory Trigger Snapshot Connecting the Trigger Snapshot T00146E CAUTION When connecting the probe to the Intelligent Tester II, gently insert it straight into the connector. Inserting the probe at a slant can break the connector pins. How to use Trigger Snapshot 1. Press the Trigger Snapshot button while the data list is displayed. Data recording begins. 2. Press the Trigger Snapshot button during data recording. A snapshot flag is set. NOTE Trigger Snapshot can be used to set snapshot flags in a maximum of five places. Reference: Page 86 Playback With Snapshot Flag Set (Chapter 5. Saved Data Playback Functions/Snapshot Playback) Pressing the Trigger Snapshot button after five snapshot flags are set stops data recording. - 67 - http://www.obd2be.com/
4 Diagnostics Functions Snapshot operation settings Settings can be performed for snapshot operation. 1. Touch on the snapshot screen. Alternatively, in the data list screen [Function] list, touch [Snapshot Configuration]. The snapshot operation setting screen is displayed. Snapshot screen T00147E T00148E [Function] Menu list T00149E Snapshot operation setting screen The setting contents are as follows. Record Time Sets the recording time. Select from 5s/10s/15s/30s/1 min./2 min./5 min. Trigger Point Sets the percentage of the recording time saved as data before the trigger is pressed. Trigger Sets the type of trigger. The types of triggers are as follows. Manual : The trigger is applied manually by touching the data list display section. Parameter : The trigger is applied at the set parameter value. DTC : The trigger is applied when a diagnostics code is detected. MIL : The trigger is applied when the engine warning lamp comes ON. Trigger Configuration Button Sets the parameter triggers. This button is only active if “Parameter” is selected from the trigger items. Reference: Page 69 - 68 - http://www.obd2be.com/
- Page 25 and 26: 1 Before Use Inserting a CF Card Th
- Page 27 and 28: 1 Before Use Connecting the Probes
- Page 29 and 30: 2 Basic Operations http://www.obd2b
- Page 31 and 32: 2 Basic Operations After the openin
- Page 33 and 34: 2 Basic Operations Screen Configura
- Page 35 and 36: 2 Basic Operations Menu Bar Five me
- Page 37 and 38: 2 Basic Operations [System] menu To
- Page 39 and 40: 2 Basic Operations Scroll bar opera
- Page 41 and 42: 2 Basic Operations In Case of Error
- Page 43 and 44: 3 Default Settings http://www.obd2b
- Page 45 and 46: 3 Default Settings Supplementary Fu
- Page 47 and 48: 3 Default Settings Unit Conversion
- Page 49 and 50: 3 Default Settings Touch Panel Comp
- Page 51 and 52: 4 Diagnostics Functions http://www.
- Page 53 and 54: 4 Diagnostics Functions NOTE If a m
- Page 55 and 56: 4 Diagnostics Functions DTC Check D
- Page 57 and 58: 4 Diagnostics Functions If the stor
- Page 59 and 60: 4 Diagnostics Functions Freeze Fram
- Page 61 and 62: 4 Diagnostics Functions ACTIVE KEY
- Page 63 and 64: 4 Diagnostics Functions Data List V
- Page 65 and 66: 4 Diagnostics Functions Display Swi
- Page 67 and 68: 4 Diagnostics Functions Data List 1
- Page 69 and 70: 4 Diagnostics Functions Meter 1 Met
- Page 71 and 72: 4 Diagnostics Functions Line Graph
- Page 73 and 74: 4 Diagnostics Functions Bar Graph T
- Page 75: 4 Diagnostics Functions "Vehicle mo
- Page 79 and 80: 4 Diagnostics Functions Parameter t
- Page 81 and 82: 4 Diagnostics Functions ACTIVE KEY
- Page 83 and 84: 4 Diagnostics Functions Active Test
- Page 85 and 86: 4 Diagnostics Functions Utilities T
- Page 87 and 88: 4 Diagnostics Functions Explanation
- Page 89 and 90: 4 Diagnostics Functions Help functi
- Page 91 and 92: 5 Saved Data Playback Functions 5 S
- Page 93 and 94: 5 Saved Data Playback Functions Sna
- Page 95 and 96: 5 Saved Data Playback Functions Pla
- Page 97 and 98: 6 Measurement Functions http://www.
- Page 99 and 100: 6 Measurement Functions Voltage Dis
- Page 101 and 102: 6 Measurement Functions ACTIVE KEY
- Page 103 and 104: 6 Measurement Functions Screen Imag
- Page 105 and 106: 6 Measurement Functions Screen Imag
- Page 107 and 108: 6 Measurement Functions Oscilloscop
- Page 109 and 110: 6 Measurement Functions ACTIVE KEY
- Page 111 and 112: 6 Measurement Functions Trigger cha
- Page 113 and 114: 6 Measurement Functions To observe
- Page 115 and 116: 6 Measurement Functions ACTIVE KEY
- Page 117 and 118: 6 Measurement Functions Deleting a
- Page 119 and 120: 6 Measurement Functions Plays back/
- Page 121 and 122: 7 Handling http://www.obd2be.com/
- Page 123 and 124: 7 Handling Battery Replacement This
- Page 125 and 126: 7 Handling 3. Pull out the battery
4 Diagnostics Functions<br />
Snapshot operation settings<br />
Settings can be performed for snapshot operation.<br />
1. Touch on the snapshot screen.<br />
Alternatively, in the data list screen [Function] list, touch [Snapshot Configuration].<br />
The snapshot operation setting screen is displayed.<br />
Snapshot screen<br />
T00147E<br />
T00148E<br />
[Function] Menu list<br />
T00149E<br />
Snapshot operation setting screen<br />
The setting contents are as follows.<br />
Record Time<br />
Sets the recording time.<br />
Select from 5s/10s/15s/30s/1 min./2 min./5 min.<br />
Trigger Point<br />
Sets the percentage of the recording time saved as data before the trigger is pressed.<br />
Trigger<br />
Sets the type of trigger. The types of triggers are as follows.<br />
<strong>Manual</strong> : The trigger is applied manually by touching the data list display section.<br />
Parameter : The trigger is applied at the set parameter value.<br />
DTC : The trigger is applied when a diagnostics code is detected.<br />
MIL : The trigger is applied when the engine warning lamp <strong>com</strong>es ON.<br />
Trigger Configuration Button<br />
Sets the parameter triggers. This button is only active if “Parameter” is selected from the trigger items.<br />
Reference: Page 69<br />
- 68 -<br />
http://www.obd2be.<strong>com</strong>/