TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com TOYOTA Intelligent Tester User Manual - Obd2be.com
3 Default Settings 3 Default Settings Tool Option Function The default setting tool option function changes the default settings (the factory settings) for the Intelligent Tester II. The various tool option functions can be selected from the [System] menu on the main menu screen title bar. This section explains the default setting functions. NOTE Updating the diagnosis software will cause all setting parameters changed using the tool option function to be reset to their default settings (factory settings). After updating diagnosis software, go back and manually change setting parameters to their condition before software update, as needed. Depending on the manufacturing model of the Intelligent Tester II, there are certain features that differ. In regards to how to confirm the manufacturing model, please refer to "Confirmation of the manufacturing model". Reference: Page 6 Confirmation of the manufacturing model (Chapter 1. Before Use) T00069E [System] menu - 35 - http://www.obd2be.com/
3 Default Settings Supplementary Functions (Set Up) The supplementary functions set the level of back light brightness and the display contrast, and turn the buzzer ON/OFF. Back Light Adjusts the back light brightness. Sliding the indicator to the left increases the level of brightness. NOTE Making the back light brighter uses more power. When the Intelligent Tester II is running on its internal battery,we recommend that the back light be dimmed for as possible. Display Contrast Adjusts the display contrast. Sliding the indicator to the left darkens the display. T00070E NOTE For manufacturing model "DN-IT2-002", adjusting the display contrast settings will not affect actual display contrast. Please note that this is not a malfunction. Buzzer Select ON/OFF for the buzzer (touch sound). ACTIVE KEY OK Cancel Activates the selected settings. Returns to the previous settings. - 36 - http://www.obd2be.com/
- Page 1 and 2: http://www.obd2be.com/
- Page 3 and 4: SOFTWARE as a Component of the DEVI
- Page 5 and 6: Preface Preface Thank you for purch
- Page 7 and 8: For safe usage CAUTION Do not leave
- Page 9 and 10: Table of contents 4 Diagnostics Fun
- Page 11 and 12: 1 Before Use 1 Before Use Product C
- Page 13 and 14: 1 Before Use AC / DC Power Supply P
- Page 15 and 16: 1 Before Use Confirmation of the ma
- Page 17 and 18: 1 Before Use Names of the Parts The
- Page 19 and 20: 1 Before Use How to Use the Stand T
- Page 21 and 22: 1 Before Use CAUTION Do not use dev
- Page 23 and 24: 1 Before Use Connection This sectio
- Page 25 and 26: 1 Before Use Inserting a CF Card Th
- Page 27 and 28: 1 Before Use Connecting the Probes
- Page 29 and 30: 2 Basic Operations http://www.obd2b
- Page 31 and 32: 2 Basic Operations After the openin
- Page 33 and 34: 2 Basic Operations Screen Configura
- Page 35 and 36: 2 Basic Operations Menu Bar Five me
- Page 37 and 38: 2 Basic Operations [System] menu To
- Page 39 and 40: 2 Basic Operations Scroll bar opera
- Page 41 and 42: 2 Basic Operations In Case of Error
- Page 43: 3 Default Settings http://www.obd2b
- Page 47 and 48: 3 Default Settings Unit Conversion
- Page 49 and 50: 3 Default Settings Touch Panel Comp
- Page 51 and 52: 4 Diagnostics Functions http://www.
- Page 53 and 54: 4 Diagnostics Functions NOTE If a m
- Page 55 and 56: 4 Diagnostics Functions DTC Check D
- Page 57 and 58: 4 Diagnostics Functions If the stor
- Page 59 and 60: 4 Diagnostics Functions Freeze Fram
- Page 61 and 62: 4 Diagnostics Functions ACTIVE KEY
- Page 63 and 64: 4 Diagnostics Functions Data List V
- Page 65 and 66: 4 Diagnostics Functions Display Swi
- Page 67 and 68: 4 Diagnostics Functions Data List 1
- Page 69 and 70: 4 Diagnostics Functions Meter 1 Met
- Page 71 and 72: 4 Diagnostics Functions Line Graph
- Page 73 and 74: 4 Diagnostics Functions Bar Graph T
- Page 75 and 76: 4 Diagnostics Functions "Vehicle mo
- Page 77 and 78: 4 Diagnostics Functions Snapshot op
- Page 79 and 80: 4 Diagnostics Functions Parameter t
- Page 81 and 82: 4 Diagnostics Functions ACTIVE KEY
- Page 83 and 84: 4 Diagnostics Functions Active Test
- Page 85 and 86: 4 Diagnostics Functions Utilities T
- Page 87 and 88: 4 Diagnostics Functions Explanation
- Page 89 and 90: 4 Diagnostics Functions Help functi
- Page 91 and 92: 5 Saved Data Playback Functions 5 S
- Page 93 and 94: 5 Saved Data Playback Functions Sna
3 Default Settings<br />
Supplementary Functions (Set Up)<br />
The supplementary functions set the level of back light brightness and the display<br />
contrast, and turn the buzzer ON/OFF.<br />
Back Light<br />
Adjusts the back light brightness. Sliding the indicator to the left increases the level of<br />
brightness.<br />
NOTE<br />
Making the back light brighter uses more power.<br />
When the <strong>Intelligent</strong> <strong>Tester</strong> II is running on its internal battery,we<br />
re<strong>com</strong>mend that the back light be dimmed for as possible.<br />
Display Contrast<br />
Adjusts the display contrast. Sliding the indicator to the left darkens the display.<br />
T00070E<br />
NOTE<br />
For manufacturing model "DN-IT2-002", adjusting the display contrast<br />
settings will not affect actual display contrast. Please note that this is not<br />
a malfunction.<br />
Buzzer<br />
Select ON/OFF for the buzzer (touch sound).<br />
ACTIVE KEY<br />
OK<br />
Cancel<br />
Activates the selected settings.<br />
Returns to the previous settings.<br />
- 36 -<br />
http://www.obd2be.<strong>com</strong>/