TOYOTA Intelligent Tester User Manual - Obd2be.com

2 Basic Operations
Main Unit Operation
The main unit of the Intelligent Tester II has four hardware keys.
All operations of the Intelligent Tester II can be carried out on the display, but four hardware keys are used for frequentlyused
functions in order to improve operability.
Scroll up key
Right function key
Scroll down key
The hardware key functions are as follows.
Hardware key
Left function key
Functions
T00062E
Scroll up key
Scroll down key
Left function key
Right function key
This key is enabled when a list (and a scroll bar) is shown on the display. It scrolls the
list up.
Pressing this key once scrolls the list up one line; holding the key down scrolls the list
up continuously.
This key is enabled when a list (and a scroll bar) is shown on the display.It scrolls the
list down.
Pressing this key once scrolls the list down one line; holding this key down scrolls the
list down continuously.
Used to return from the screen currently being displayed to the onboard/offboard check
screen.
Normally used to return to the system select screen.
Used to start/stop measurement during voltage measurement and measurement with
the oscilloscope function.
When screen image saving is set to "ON", pressing this key saves the screen image.
Reference: Page 41 Button Setting Functions (Button Configuration) (Chapter 3.
Default Settings/Tool Option Function)
- 31 -
http://www.obd2be.com/