TOYOTA Intelligent Tester User Manual - Obd2be.com

2 Basic Operations
[View] menu
The data list display form can be selected from the [View] menu. However, the [View] menu is only enabled when the
[Data List] or [Active Test] function is selected from the [Function] menu. Functions that can be selected from the [View]
menu are as follows.
Function
Contents
Reference
page
Data List 1
Displays the monitor items, values,
and units in a list on one line.
P.58
Data List 2
Displays the monitor items
(abbreviations), values, and units in a
list on two lines.
P.59
[View] menu
T00055E
Meter 1
Meter 2
Displays the monitor items, values
(enlarged), maximum, and minimum
values, and units in a list on one line.
Displays the monitor items
(abbreviations), values (enlarged),
and units in a list on two lines.
P.60
P.61
Line Graph 1
Displays the monitor items, values
(broken-line graph), maximum, and
minimum values, and units in a list
on one line.
P.62
Line Graph 2
Displays the monitor items, values,
and units in a list on one line together
with a broken-line graph of the
values.
P.63
Bar Graph
Displays the monitor items, values
(bar graph), maximum, and
minimum values, and units in a list
on one line.
P.64
Graph Setting
Sets the vertical axis for graphing
the displayed data. (Line Graph1,
Line Graph2, Bar Graph only)
Sets the buzzer to ON/OFF for
when the maximum value or
minimum value displayed on a
graph other than for Data List1 or
Data List2 is updated.
-
- 27 -
http://www.obd2be.com/