TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com TOYOTA Intelligent Tester User Manual - Obd2be.com
2 Basic Operations 2 Basic Operations Starting and Ending Starting 1. Connect the Intelligent Tester II and vehicle side datalink connectors (DLC3) with the datalink cable. Reference: Page 14 Connecting to the Vehicle (Chapter 1. Before Use/Connection) 2. Turn the vehicle ignition switch ON. NOTE Communication with the vehicle computer (ECU) is not possible if the ignition switch is at OFF or ACC. When the Intelligent Tester II is turned ON, always switch the ignition switch ON or start the engine. When the Intelligent Tester II is used as measurement function (voltage measurement, oscilloscope), it will work even if the ignition switch is at OFF or ACC. If the Intelligent Tester II is connected to the vehicle’s diagnostic connector (DLC3) by a datalink cable and supplied with power via an AC/DC adapter or DC power cable for a cigarette lighter socket, the Intelligent Tester II can be operated even with its power switch turned off. 3. Press the Intelligent Tester II power switch to turn the power ON. T00043E CAUTION During startup, never switch the Intelligent Tester II power switch OFF until the onboard/offboard check screen is displayed. - 21 - http://www.obd2be.com/
2 Basic Operations After the opening screen is displayed, the display automatically switches to the onboard/offboard check screen. T00044E Toyota opening screen T00045E Lexus opening screen T00046E Onboard/offboard check screen NOTE There are two opening screens, one for Toyota and one for Lexus. These are selected using the brand select function. The factory setting is the Toyota opening screen. Reference: Page 38 Brand Selection Function (Brand Select) (Chapter 3. Default Settings/Tool Option Function) 4. When using the Intelligent Tester II as the OBD function, touch Auto or Manual on the onboard/ offboard screen. The system select screen is displayed. T00047E Onboard/offboard check screen T00048E System select screen NOTE To execute the OBD function, choose whether the vehicle is to be selected automatically or manually. Reference: Page 43 Automatic Vehicle Selection (Chapter 4. Diagnostics Functions/System Selection) Reference: Page 44 Manual Vehicle Selection (Chapter 4. Diagnostics Functions/System Selection) When using Voltage meter or another measurement function, select that function from the [Utility] menu. - 22 - http://www.obd2be.com/
- Page 1 and 2: http://www.obd2be.com/
- Page 3 and 4: SOFTWARE as a Component of the DEVI
- Page 5 and 6: Preface Preface Thank you for purch
- Page 7 and 8: For safe usage CAUTION Do not leave
- Page 9 and 10: Table of contents 4 Diagnostics Fun
- Page 11 and 12: 1 Before Use 1 Before Use Product C
- Page 13 and 14: 1 Before Use AC / DC Power Supply P
- Page 15 and 16: 1 Before Use Confirmation of the ma
- Page 17 and 18: 1 Before Use Names of the Parts The
- Page 19 and 20: 1 Before Use How to Use the Stand T
- Page 21 and 22: 1 Before Use CAUTION Do not use dev
- Page 23 and 24: 1 Before Use Connection This sectio
- Page 25 and 26: 1 Before Use Inserting a CF Card Th
- Page 27 and 28: 1 Before Use Connecting the Probes
- Page 29: 2 Basic Operations http://www.obd2b
- Page 33 and 34: 2 Basic Operations Screen Configura
- Page 35 and 36: 2 Basic Operations Menu Bar Five me
- Page 37 and 38: 2 Basic Operations [System] menu To
- Page 39 and 40: 2 Basic Operations Scroll bar opera
- Page 41 and 42: 2 Basic Operations In Case of Error
- Page 43 and 44: 3 Default Settings http://www.obd2b
- Page 45 and 46: 3 Default Settings Supplementary Fu
- Page 47 and 48: 3 Default Settings Unit Conversion
- Page 49 and 50: 3 Default Settings Touch Panel Comp
- Page 51 and 52: 4 Diagnostics Functions http://www.
- Page 53 and 54: 4 Diagnostics Functions NOTE If a m
- Page 55 and 56: 4 Diagnostics Functions DTC Check D
- Page 57 and 58: 4 Diagnostics Functions If the stor
- Page 59 and 60: 4 Diagnostics Functions Freeze Fram
- Page 61 and 62: 4 Diagnostics Functions ACTIVE KEY
- Page 63 and 64: 4 Diagnostics Functions Data List V
- Page 65 and 66: 4 Diagnostics Functions Display Swi
- Page 67 and 68: 4 Diagnostics Functions Data List 1
- Page 69 and 70: 4 Diagnostics Functions Meter 1 Met
- Page 71 and 72: 4 Diagnostics Functions Line Graph
- Page 73 and 74: 4 Diagnostics Functions Bar Graph T
- Page 75 and 76: 4 Diagnostics Functions "Vehicle mo
- Page 77 and 78: 4 Diagnostics Functions Snapshot op
- Page 79 and 80: 4 Diagnostics Functions Parameter t
2 Basic Operations<br />
2 Basic Operations<br />
Starting and Ending<br />
Starting<br />
1. Connect the <strong>Intelligent</strong> <strong>Tester</strong> II and vehicle side datalink connectors (DLC3) with the datalink cable.<br />
Reference: Page 14 Connecting to the Vehicle (Chapter 1. Before Use/Connection)<br />
2. Turn the vehicle ignition switch ON.<br />
NOTE<br />
Communication with the vehicle <strong>com</strong>puter (ECU) is not possible if the ignition switch is at OFF or ACC.<br />
When the <strong>Intelligent</strong> <strong>Tester</strong> II is turned ON, always switch the ignition switch ON or start the engine.<br />
When the <strong>Intelligent</strong> <strong>Tester</strong> II is used as measurement function (voltage measurement, oscilloscope), it will<br />
work even if the ignition switch is at OFF or ACC.<br />
If the <strong>Intelligent</strong> <strong>Tester</strong> II is connected to the vehicle’s diagnostic connector (DLC3) by a datalink cable and<br />
supplied with power via an AC/DC adapter or DC power cable for a cigarette lighter socket, the <strong>Intelligent</strong><br />
<strong>Tester</strong> II can be operated even with its power switch turned off.<br />
3. Press the <strong>Intelligent</strong> <strong>Tester</strong> II power switch to turn the power ON.<br />
T00043E<br />
CAUTION<br />
During startup, never switch the <strong>Intelligent</strong> <strong>Tester</strong> II power switch OFF until the onboard/offboard check<br />
screen is displayed.<br />
- 21 -<br />
http://www.obd2be.<strong>com</strong>/
Change language