TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Before Use<br />
Connecting the Oscilloscope Cartridge<br />
If you purchased the optional cartridge with the built-in oscilloscope, it is necessary to replace the standard cartridge with<br />
this cartridge.<br />
Loosen the five screws securing the standard cartridge and remove the cartridge.<br />
Replace the standard cartridge with the built-in oscilloscope cartridge, and secure it in place by tightening the five screws<br />
to a torque of 0.5±0.1 Nm.<br />
T00040E<br />
CAUTION<br />
Always make sure the power to the <strong>Intelligent</strong> <strong>Tester</strong> II is OFF before replacing the cartridge.<br />
When connecting the cartridge with the built-in to oscilloscope to the main unit, carefully check the<br />
configuration of the connector and gently insert the cartridge straight in.<br />
Inserting the cartridge at a slant can break the connector pins.<br />
Be careful not to touch the connector section of the main unit or the cartridge with your hands.<br />
- 17 -<br />
http://www.obd2be.<strong>com</strong>/
Change language