TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com TOYOTA Intelligent Tester User Manual - Obd2be.com
1 Before Use 3. Visually check the serial number label attached to the rear side of the Intelligent Tester II main unit and verify the manufacturing model. Serial number label DN-IT2-001: Intelligent Tester II manufactured on or before August 2008 DN-IT2-002: Intelligent Tester II manufactured on and after September 2008 4. Mount the cartridge in the main unit and tighten the five screws to a torque of 0.5±0.1Nm with a Philips screwdriver. T01023E T00255E CAUTION When connecting the cartridge with the built-in to oscilloscope to the main unit, carefully check the configuration of the connector and gently insert the cartridge straight in. Inserting the cartridge at a slant can break the connector pins. Be careful not to touch the connector section of the main unit or the cartridge with your hands. - 7 - http://www.obd2be.com/
1 Before Use Names of the Parts The names of the Intelligent Tester II parts are as follows. T00033E - 8 - http://www.obd2be.com/
- Page 1 and 2: http://www.obd2be.com/
- Page 3 and 4: SOFTWARE as a Component of the DEVI
- Page 5 and 6: Preface Preface Thank you for purch
- Page 7 and 8: For safe usage CAUTION Do not leave
- Page 9 and 10: Table of contents 4 Diagnostics Fun
- Page 11 and 12: 1 Before Use 1 Before Use Product C
- Page 13 and 14: 1 Before Use AC / DC Power Supply P
- Page 15: 1 Before Use Confirmation of the ma
- Page 19 and 20: 1 Before Use How to Use the Stand T
- Page 21 and 22: 1 Before Use CAUTION Do not use dev
- Page 23 and 24: 1 Before Use Connection This sectio
- Page 25 and 26: 1 Before Use Inserting a CF Card Th
- Page 27 and 28: 1 Before Use Connecting the Probes
- Page 29 and 30: 2 Basic Operations http://www.obd2b
- Page 31 and 32: 2 Basic Operations After the openin
- Page 33 and 34: 2 Basic Operations Screen Configura
- Page 35 and 36: 2 Basic Operations Menu Bar Five me
- Page 37 and 38: 2 Basic Operations [System] menu To
- Page 39 and 40: 2 Basic Operations Scroll bar opera
- Page 41 and 42: 2 Basic Operations In Case of Error
- Page 43 and 44: 3 Default Settings http://www.obd2b
- Page 45 and 46: 3 Default Settings Supplementary Fu
- Page 47 and 48: 3 Default Settings Unit Conversion
- Page 49 and 50: 3 Default Settings Touch Panel Comp
- Page 51 and 52: 4 Diagnostics Functions http://www.
- Page 53 and 54: 4 Diagnostics Functions NOTE If a m
- Page 55 and 56: 4 Diagnostics Functions DTC Check D
- Page 57 and 58: 4 Diagnostics Functions If the stor
- Page 59 and 60: 4 Diagnostics Functions Freeze Fram
- Page 61 and 62: 4 Diagnostics Functions ACTIVE KEY
- Page 63 and 64: 4 Diagnostics Functions Data List V
- Page 65 and 66: 4 Diagnostics Functions Display Swi
1 Before Use<br />
Names of the Parts<br />
The names of the <strong>Intelligent</strong> <strong>Tester</strong> II parts are as follows.<br />
T00033E<br />
- 8 -<br />
http://www.obd2be.<strong>com</strong>/