TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1 Before Use<br />
3. Visually check the serial number label attached to the rear side of the <strong>Intelligent</strong> <strong>Tester</strong> II main unit and<br />
verify the manufacturing model.<br />
Serial number label<br />
DN-IT2-001: <strong>Intelligent</strong> <strong>Tester</strong> II manufactured on or before August 2008<br />
DN-IT2-002: <strong>Intelligent</strong> <strong>Tester</strong> II manufactured on and after September 2008<br />
4. Mount the cartridge in the main unit and tighten the five screws to a torque of 0.5±0.1Nm with a Philips<br />
screwdriver.<br />
T01023E<br />
T00255E<br />
CAUTION<br />
When connecting the cartridge with the built-in to oscilloscope to the main unit, carefully check the<br />
configuration of the connector and gently insert the cartridge straight in.<br />
Inserting the cartridge at a slant can break the connector pins.<br />
Be careful not to touch the connector section of the main unit or the cartridge with your hands.<br />
- 7 -<br />
http://www.obd2be.<strong>com</strong>/
Change language