TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com TOYOTA Intelligent Tester User Manual - Obd2be.com
7 Handling 7 Handling Handling Precautions Pay attention to the following points when handling the Intelligent Tester II and its accessories. Do not leave this tester or any of its accessories exposed to direct sunlight for long periods of time. In locations with high humidity, the display back light can deteriorate and the brightness decrease. Use and store in locations with low humidity. Also, in low-temperature locations, the display response may be slow. This phenomenon is normal and is caused by the characteristics of the LCD display. When cleaning the tester or accessories, never use paint thinner or any other solvent or volatile oil product. This could cause deformation, discoloration, and other such problems as well as loss of function. Wipe gently with a soft cloth dipped in a diluted neutral detergent. After updating diagnosis software, all setting parameters that were changed using the tool option function will be reset to their default settings (factory settings). Go back and manually change settings, as needed. When the Intelligent Tester II is left unused for a prolonged time, the clock may become inaccurate or stop altogether. If this happens, reset the clock. If the internal battery is allowed to remain completely drained for a long time, this will drastically reduce its service life. Even when not using the Intelligent Tester II, charge the internal battery at least once a month. Disposal When disposing of the Intelligent Tester II or any of its accessories, please do the following. The Intelligent Tester II and its accessories contain electronic parts installed using solder that includes lead. In order to prevent damage to the environment resulting from this lead, ask the waste processing company to handle this equipment separate to ordinary non-burnable material. The plastic case of the Intelligent Tester II is made of polycarbonate, ABS, and acrylic. Excluding the clear panel (acrylic), the plastic parts have materials abbreviations stamped inside. In order to recycle these compound plastic products, ask the waste processing company to handle the different plastics separately. The main unit of the Intelligent Tester II and the oscilloscope cartridge have a lithium ion internal battery. Dispose of used internal batteries in accordance with the regulations of the nation and region. - 113 - http://www.obd2be.com/
7 Handling Battery Replacement This product uses a lithium ion battery. When replacing the battery, read the cautions below carefully and replace the battery correctly and safely. WARNING Always observe the following rules. Failure to do so can result in heat generation, fire, blowout, or battery fluid leakage. Do not use any battery other than the lithium ion battery supplied by DENSO (95171-10341). Do not heat or burn the battery. Do not disassemble or alter this battery. Do not short the terminals. Do not use, charge, or leave the battery in any high-temperature location. CAUTION Correctly dispose of used-up batteries in accordance with legal requirements. - 114 - http://www.obd2be.com/
- Page 71 and 72: 4 Diagnostics Functions Line Graph
- Page 73 and 74: 4 Diagnostics Functions Bar Graph T
- Page 75 and 76: 4 Diagnostics Functions "Vehicle mo
- Page 77 and 78: 4 Diagnostics Functions Snapshot op
- Page 79 and 80: 4 Diagnostics Functions Parameter t
- Page 81 and 82: 4 Diagnostics Functions ACTIVE KEY
- Page 83 and 84: 4 Diagnostics Functions Active Test
- Page 85 and 86: 4 Diagnostics Functions Utilities T
- Page 87 and 88: 4 Diagnostics Functions Explanation
- Page 89 and 90: 4 Diagnostics Functions Help functi
- Page 91 and 92: 5 Saved Data Playback Functions 5 S
- Page 93 and 94: 5 Saved Data Playback Functions Sna
- Page 95 and 96: 5 Saved Data Playback Functions Pla
- Page 97 and 98: 6 Measurement Functions http://www.
- Page 99 and 100: 6 Measurement Functions Voltage Dis
- Page 101 and 102: 6 Measurement Functions ACTIVE KEY
- Page 103 and 104: 6 Measurement Functions Screen Imag
- Page 105 and 106: 6 Measurement Functions Screen Imag
- Page 107 and 108: 6 Measurement Functions Oscilloscop
- Page 109 and 110: 6 Measurement Functions ACTIVE KEY
- Page 111 and 112: 6 Measurement Functions Trigger cha
- Page 113 and 114: 6 Measurement Functions To observe
- Page 115 and 116: 6 Measurement Functions ACTIVE KEY
- Page 117 and 118: 6 Measurement Functions Deleting a
- Page 119 and 120: 6 Measurement Functions Plays back/
- Page 121: 7 Handling http://www.obd2be.com/
- Page 125 and 126: 7 Handling 3. Pull out the battery
- Page 127 and 128: 7 Handling 7. Close the lid of the
- Page 129 and 130: 8 Product Specifications 8 Product
- Page 131 and 132: 9 After-Service http://www.obd2be.c
- Page 133 and 134: If you have any questions regarding
- Page 135 and 136: Manufacturer’s Declaration of Con
7 Handling<br />
Battery Replacement<br />
This product uses a lithium ion battery. When replacing the battery, read the cautions below carefully and replace the battery<br />
correctly and safely.<br />
WARNING<br />
Always observe the following rules. Failure to do so can result in heat generation, fire, blowout, or battery fluid<br />
leakage.<br />
Do not use any battery other than the lithium ion battery supplied by DENSO (95171-10341).<br />
Do not heat or burn the battery.<br />
Do not disassemble or alter this battery.<br />
Do not short the terminals.<br />
Do not use, charge, or leave the battery in any high-temperature location.<br />
CAUTION<br />
Correctly dispose of used-up batteries in accordance with legal requirements.<br />
- 114 -<br />
http://www.obd2be.<strong>com</strong>/