TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
TOYOTA Intelligent Tester User Manual - Obd2be.com
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
6 Measurement Functions<br />
Calibration<br />
Calibrates the zero point.<br />
1. Touch CAL on the voltage display screen or the waveform display screen.<br />
The calibrating dialog box is displayed.<br />
T00195E<br />
Voltage display screen<br />
T00196E<br />
Waveform display screen<br />
2. Connect the voltage measurement tester probe to the reference point.<br />
3. On the calibrating dialog box, touch OK .<br />
The calibrating dialog is displayed. When the calibration is <strong>com</strong>plete, the hint dialog box is displayed.<br />
Do not remove the probe during calibration.<br />
T00197E<br />
Calibrating dialog box<br />
T00198E<br />
Calibrating dialog box<br />
4. Check the contents of the hint dialog, then touch OK .<br />
When calibration ends, the tip dialog box is displayed automatically.<br />
This dialog displays an explanation for stopping/resuming waveform updating using the right function key on the<br />
main unit.<br />
Hint dialog box<br />
T00199E<br />
- 93 -<br />
http://www.obd2be.<strong>com</strong>/
Change language