G scan User Manual.pdf - OBDResource
G scan User Manual.pdf - OBDResource G scan User Manual.pdf - OBDResource
G-scan User Manual 1. Turn G-scan base unit power OFF and remove the SD Card 2. Insert the SD Card to the provided Card Reader 3. Insert the Card Reader to a USB port of the PC 4. Click “Next” button to proceed Caution • Make sure to move the SD Card Write Protection Tab to the UNLOCK position before inserting to the PC as illustrated in Fig. 2. • PC Utility may not function properly if the write protection tab is at the LOCKED position [Fig. 3] SD Card Write Protection Tab Type in the G-scan base unit serial number correctly, and feed in the correct ID and password as registered when purchased G-Scan as shown in Fig. 4. Click “Next” button when ready. [Fig. 4] Serial number, ID and Password input 82 http://www.obd2be.com/
G-scan User Manual Software Update begins automatically if serial number, ID and password information provided are all correct. [Fig. 5] Software Update in progress Click “Done” when the progress bar reaches 100% and the “Update Completed” message appears in the window, [Fig. 6] Software Update Completed 83 http://www.obd2be.com/
- Page 31 and 32: G-scan User Manual Tool Set Buttons
- Page 33 and 34: G-scan User Manual Pen Mode When th
- Page 35 and 36: G-scan User Manual 3.2. Flight Reco
- Page 37 and 38: G-scan User Manual Selected file is
- Page 39 and 40: G-scan User Manual OBD-II Originall
- Page 41 and 42: G-scan User Manual P07XX ~ P09XX P0
- Page 43 and 44: G-scan User Manual button will conv
- Page 45 and 46: G-scan User Manual 3.5. Configurati
- Page 47 and 48: G-scan User Manual LCD Backlight br
- Page 49 and 50: G-scan User Manual Buzz / Unit Touc
- Page 51 and 52: G-scan User Manual Version G-Scan s
- Page 53 and 54: G-scan User Manual Self Test Proced
- Page 55 and 56: G-scan User Manual Step-B Step-B is
- Page 57 and 58: G-scan User Manual Chapter 4. G-sca
- Page 59 and 60: G-scan User Manual Click “Next (N
- Page 61 and 62: G-scan User Manual Click “Finish
- Page 63 and 64: G-scan User Manual Click “Finish
- Page 65 and 66: G-scan User Manual GIT Website: Cl
- Page 67 and 68: G-scan User Manual When the SD Card
- Page 69 and 70: G-scan User Manual Icon Description
- Page 71 and 72: G-scan User Manual Adding, removing
- Page 73 and 74: G-scan User Manual The Cursor B app
- Page 75 and 76: G-scan User Manual [Fig. 16] Record
- Page 77 and 78: G-scan User Manual When the SD Card
- Page 79 and 80: G-scan User Manual Print Click “P
- Page 81: G-scan User Manual 4.5. Software Up
- Page 85 and 86: G-scan User Manual The procedure is
- Page 87 and 88: G-scan User Manual Caution • Make
- Page 89 and 90: G-scan User Manual The warning mess
- Page 91 and 92: G-scan User Manual Caution • Do n
- Page 93 and 94: G-scan User Manual 4.7. PC Utility
- Page 95 and 96: G-scan User Manual User information
- Page 97 and 98: G-scan User Manual In order to dele
- Page 99 and 100: G-scan User Manual Chapter 5 Append
- Page 101 and 102: G-scan User Manual 3) Hold the batt
- Page 103 and 104: G-scan User Manual 5.2. Cigarette L
- Page 105 and 106: G-scan User Manual The message info
- Page 107 and 108: G-scan User Manual Error Message fo
- Page 109 and 110: G-scan User Manual 5.5. G-Scan Limi
- Page 111: G-scan User Manual 5.6. Discard of
G-<strong>scan</strong> <strong>User</strong> <strong>Manual</strong><br />
1. Turn G-<strong>scan</strong> base unit power OFF and remove the SD Card<br />
2. Insert the SD Card to the provided Card Reader<br />
3. Insert the Card Reader to a USB port of the PC<br />
4. Click “Next” button to proceed<br />
Caution<br />
• Make sure to move the SD Card Write Protection Tab to the UNLOCK position before<br />
inserting to the PC as illustrated in Fig. 2.<br />
• PC Utility may not function properly if the write protection tab is at the LOCKED position<br />
[Fig. 3] SD Card Write Protection Tab<br />
Type in the G-<strong>scan</strong> base unit serial number correctly, and feed in the correct ID and password as<br />
registered when purchased G-Scan as shown in Fig. 4. Click “Next” button when ready.<br />
[Fig. 4] Serial number, ID and Password input<br />
82<br />
http://www.obd2be.com/
Change language