10 AND 12-BIT GRAYSCALE TECHNOLOGY - Nvidia
10 AND 12-BIT GRAYSCALE TECHNOLOGY - Nvidia 10 AND 12-BIT GRAYSCALE TECHNOLOGY - Nvidia
Introduction TYPICAL MULTI-DISPLAY CONFIGURATION We examine the commonly used multi-display setups that mix grayscale monitors and color panels and their underlying GPU configuration. Case 1. Two 5 MP Grayscale Displays Driven by One Quadro Card The most commonly used configuration for diagnostic imaging, a single Quadro K4000, Quadro K2000, or Quadro K2000D drives two 5 MP grayscale displays plus a side “worklist” display. Figure 3. 10 MP Grayscale Configuration 10 and 12-Bit Grayscale Technology TB-04631-001_v04 | 6
Introduction Table 4 shows the two single card configuration options for a 10 MP setup. The customer can choose between the options for either the Quadro K2000 and Quadro K4000 or the Quadro K2000D. Table 4. Single Card Option for Dual Display Configurations Displays Side Display Quadro K2000 or Quadro K4000 (If Diagnostic Display Supports DisplayPort) DVI connector DisplayPort connector DisplayPort connector Quadro K2000D (If Diagnostic Display Only Supports DVI) DVI or DisplayPort (through mini- DisplayPort adapter) Dual-link DVI connector Dual-link DVI connector 2-5 MP Diagnostic Display 2-5 MP Diagnostic Display 10 and 12-Bit Grayscale Technology TB-04631-001_v04 | 7
- Page 1 and 2: 10 AND 12-BIT GRAYSCALE TECHNOLOGY
- Page 3 and 4: TABLE OF CONTENTS Introduction ....
- Page 5 and 6: INTRODUCTION Advances in sensor tec
- Page 7 and 8: Introduction Figure 2. Application
- Page 9: Introduction SUPPORTED MONITORS Tab
- Page 13 and 14: Introduction Table 5 shows the two
- Page 15 and 16: Introduction Figure 7. Latched Mini
- Page 17 and 18: GRAYSCALE APPLICATION DEVELOPMENT D
- Page 19 and 20: Grayscale Application Development i
- Page 21 and 22: Grayscale Application Development O
- Page 23 and 24: MULTI-DISPLAY CONFIGURATIONS WITH K
- Page 25 and 26: Multi-Display Configurations with K
- Page 27 and 28: Multi-Display Configurations with K
- Page 29 and 30: Appendix Table 6. Multi-GPU Compati
- Page 31 and 32: Appendix REFERENCES [1] Digital Ima
Introduction<br />
Table 4 shows the two single card configuration options for a <strong>10</strong> MP setup. The customer<br />
can choose between the options for either the Quadro K2000 and Quadro K4000 or the<br />
Quadro K2000D.<br />
Table 4.<br />
Single Card Option for Dual Display Configurations<br />
Displays<br />
Side Display<br />
Quadro K2000 or Quadro K4000<br />
(If Diagnostic Display Supports<br />
DisplayPort)<br />
DVI<br />
connector<br />
DisplayPort<br />
connector<br />
DisplayPort<br />
connector<br />
Quadro K2000D<br />
(If Diagnostic Display Only Supports DVI)<br />
DVI or<br />
DisplayPort<br />
(through mini-<br />
DisplayPort<br />
adapter)<br />
Dual-link<br />
DVI<br />
connector<br />
Dual-link<br />
DVI<br />
connector<br />
2-5 MP Diagnostic<br />
Display<br />
2-5 MP Diagnostic<br />
Display<br />
<strong>10</strong> and <strong>12</strong>-Bit Grayscale Technology TB-04631-001_v04 | 7
Change language