Theben Catalogue 2014/15. Save energy – Increase comfort.
Presence and motion detectors Presence detectors, 230 V AC Description SPHINX 104-360/2 DIMplus - Presence detector (PIR) - 2 channels for application areas class and conference rooms - Flush-mounted installation - Channel 2 presence dependent, e.g. for blackboard lighting with programmable switch-off delay or for HVAC control - Channel 1 for constant light control (1–10 V) - Lighting control with adjustable light threshold value and adjustable switch-off delay - Additional impulse function can be selected for combination with staircase timer (ELPA), building automation or PLC - Test function for checking detection area - Zero-cross switching - Automatic lighting control based on presence and brightness - Detection area can be limited using three enclosed segments - Mixed light measurement suitable for the control of fl uorescent, incandescent and halogen lamps - Instant start-up possible via factory preset - Push-button or for manual switching - Fully or semi-automatic: In „Fully automatic“ mode, the lighting switches on and off automatically according to presence and light In „Semi-automatic“ mode, it must be switched on manually and it switches off automatically Product selection Installation type Channel Detection angle Colour Type Article number Ceiling installation Light | Presence 360° Pure white (similar to RAL 9010) SPHINX 104-360/2 DIM plus 1040374 7 Technical data SPHINX 104-360/2 DIM plus Operating voltage 230 V AC Frequency 50–60 Hz Stand-by consumption 1 W Setting range brightness 5–2000 lx Switching capacity light 4 A (at 230 V AC, cos φ = 1) Switching capacity presence 2 A (cos φ = 1) μ, 250 V AC/30 V DC Detection angle 360° Recommended installation height 2.5–3.5 m Switching output Not potential-free (230 V) Switching output channel presence Potential-free Incandescent lamp load (channel presence) Fluorescent lamp load (conventional) not corrected (channel light) Fluorescent lamp load (conventional) not corrected (channel presence) Fluorescent lamp load (conventional) series-corrected (channel light) Fluorescent lamp load (conventional) series-corrected (channel presence) Fluorescent lamp load (electronic ballast) (channel presence) Energy saving lamps (channel light) Energy saving lamps (channel presence) 400 W 900 VA 200 VA 900 VA 200 VA 60 VA 4 x 7 W, 3 x 11 W, 3 x 15 W, 3 x 20 W, 3 x 23 W 2 x 7 W, 2 x 11 W, 1 x 15 W, 1 x 20 W, 1 x 23 W Light switch-off delay 1 s–20 min Ambient temperature –10 °C … +55 °C Presence switch-off delay 1–120 min Protection class II Incandescent lamp load (channel light) 1000 W Type of protection IP 40 (when fi tted) 86 Additional technical data at: www.theben.de/product/ Article number
Presence and motion detectors Presence detectors, 230 V AC Detection range (Round) Accessories 3 m 12 m ■ Walking ■ Sitting Mounting height 2.5 m RC filter ↪ Art.No.: 9070523 Details page 251 Scale drawings Connection diagrams 110 28 25 35 90 OUTPUT 110 90 INPUT EVG – + Ext2 Ext1 L‘ L L N D+ D– B1 B2 N L 7 Additional technical data at: www.theben.de/product/ Article number 87
- Page 37 and 38: Time and light control Analogue tim
- Page 39 and 40: Time and light control Analogue tim
- Page 41 and 42: Time and light control Analogue tim
- Page 43 and 44: Time and light control Analogue tim
- Page 45 and 46: Time and light control Analogue tim
- Page 47 and 48: Time and light control Analogue tim
- Page 49 and 50: Time and light control Analogue tim
- Page 51 and 52: Time and light control Analogue tim
- Page 53 and 54: Time and light control Analogue tim
- Page 55 and 56: Time and light control Time relays/
- Page 57 and 58: Time and light control Time relays
- Page 59 and 60: Time and light control Hour counter
- Page 61 and 62: Time and light control Hour counter
- Page 63 and 64: Time and light control Staircase ti
- Page 65 and 66: Time and light control Staircase ti
- Page 67 and 68: Time and light control Staircase ti
- Page 69 and 70: Time and light control Staircase ti
- Page 71 and 72: Time and light control Dimmer Techn
- Page 73 and 74: Time and light control Twilight swi
- Page 75 and 76: Time and light control Twilight swi
- Page 77 and 78: Time and light control Twilight swi
- Page 79 and 80: Time and light control Twilight swi
- Page 81 and 82: Time and light control Twilight swi
- Page 83 and 84: Presence and motion detectors Prese
- Page 85 and 86: Presence and motion detectors Prese
- Page 87: Presence and motion detectors Prese
- Page 91 and 92: Presence and motion detectors Prese
- Page 93 and 94: Presence and motion detectors Prese
- Page 95 and 96: Presence and motion detectors Prese
- Page 97 and 98: Presence and motion detectors Prese
- Page 99 and 100: Presence and motion detectors Prese
- Page 101 and 102: Presence and motion detectors Prese
- Page 103 and 104: Presence and motion detectors Prese
- Page 105 and 106: Presence and motion detectors Prese
- Page 107 and 108: Presence and motion detectors Prese
- Page 109 and 110: Presence and motion detectors Prese
- Page 111 and 112: Presence and motion detectors Prese
- Page 113 and 114: Presence and motion detectors Prese
- Page 115 and 116: Presence and motion detectors Prese
- Page 117 and 118: Presence and motion detectors Prese
- Page 119 and 120: Presence and motion detectors Prese
- Page 121 and 122: Presence and motion detectors Prese
- Page 123 and 124: Presence and motion detectors Prese
- Page 125 and 126: Presence and motion detectors Motio
- Page 127 and 128: Presence and motion detectors Motio
- Page 129 and 130: Presence and motion detectors Motio
- Page 131 and 132: Presence and motion detectors Motio
- Page 133 and 134: Presence and motion detectors Spotl
- Page 135 and 136: Presence and motion detectors Spotl
- Page 137 and 138: Presence and motion detectors Spotl
Presence and motion detectors<br />
Presence detectors, 230 V AC<br />
Description<br />
SPHINX 104-360/2 DIMplus<br />
- Presence detector (PIR)<br />
- 2 channels for application areas class<br />
and conference rooms<br />
- Flush-mounted installation<br />
- Channel 2 presence dependent, e.g. for<br />
blackboard lighting with programmable<br />
switch-off delay or for HVAC control<br />
- Channel 1 for constant light control (1<strong>–</strong>10 V)<br />
- Lighting control with adjustable light<br />
threshold value and adjustable switch-off<br />
delay<br />
- Additional impulse function can be selected<br />
for combination with staircase timer (ELPA),<br />
building automation or PLC<br />
- Test function for checking detection area<br />
- Zero-cross switching<br />
- Automatic lighting control based on presence<br />
and brightness<br />
- Detection area can be limited using three<br />
enclosed segments<br />
- Mixed light measurement suitable for the<br />
control of fl uorescent, incandescent and<br />
halogen lamps<br />
- Instant start-up possible via factory preset<br />
- Push-button or for manual switching<br />
- Fully or semi-automatic: In „Fully automatic“<br />
mode, the lighting switches on and off automatically<br />
according to presence and light In<br />
„Semi-automatic“ mode, it must be switched<br />
on manually and it switches off automatically<br />
Product selection<br />
Installation type Channel Detection angle Colour Type Article<br />
number<br />
Ceiling installation Light | Presence 360° Pure white (similar to RAL 9010) SPHINX 104-360/2 DIM plus 1040374<br />
7<br />
Technical data<br />
SPHINX 104-360/2 DIM plus<br />
Operating voltage<br />
230 V AC<br />
Frequency<br />
50<strong>–</strong>60 Hz<br />
Stand-by consumption<br />
1 W<br />
Setting range brightness<br />
5<strong>–</strong>2000 lx<br />
Switching capacity light 4 A (at 230 V AC, cos φ = 1)<br />
Switching capacity presence<br />
2 A (cos φ = 1) μ, 250 V AC/30 V DC<br />
Detection angle 360°<br />
Recommended installation height<br />
2.5<strong>–</strong>3.5 m<br />
Switching output Not potential-free (230 V)<br />
Switching output channel presence<br />
Potential-free<br />
Incandescent lamp load (channel<br />
presence)<br />
Fluorescent lamp load (conventional) not<br />
corrected (channel light)<br />
Fluorescent lamp load (conventional) not<br />
corrected (channel presence)<br />
Fluorescent lamp load (conventional)<br />
series-corrected (channel light)<br />
Fluorescent lamp load (conventional)<br />
series-corrected (channel presence)<br />
Fluorescent lamp load (electronic ballast)<br />
(channel presence)<br />
Energy saving lamps (channel light)<br />
Energy saving lamps (channel presence)<br />
400 W<br />
900 VA<br />
200 VA<br />
900 VA<br />
200 VA<br />
60 VA<br />
4 x 7 W, 3 x 11 W, 3 x 15 W, 3 x 20 W,<br />
3 x 23 W<br />
2 x 7 W, 2 x 11 W, 1 x 15 W, 1 x 20 W,<br />
1 x 23 W<br />
Light switch-off delay<br />
1 s<strong>–</strong>20 min<br />
Ambient temperature <strong>–</strong>10 °C … +55 °C<br />
Presence switch-off delay<br />
1<strong>–</strong>120 min<br />
Protection class<br />
II<br />
Incandescent lamp load (channel light)<br />
1000 W<br />
Type of protection<br />
IP 40 (when fi tted)<br />
86<br />
Additional technical data at: www.theben.de/product/ Article number