Theben Catalogue 2014/15. Save energy – Increase comfort.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Accessories<br />
Description Suitable for Type Article<br />
number<br />
PC set OBELISK top2<br />
- Switching programs created on the PC by means of the convenient<br />
OBELISK top2 software can be transferred via USB interface<br />
to the OBELISK top2 memory card and from the card to the time<br />
switch and vice versa. Thus no PC or laptop is required on-site.<br />
Programming and the program printout can be done <strong>comfort</strong>ably<br />
from the desk<br />
- For Windows XP/Vista/7/8 (32/64 Bit)<br />
- Consisting of: Memory card, USB plug adapter, software<br />
- Updates of existing OBELISK top2 software are available as free<br />
downloads at www.theben.de<br />
Memory card OBELISK top2<br />
- Individual memory card<br />
- TR top2<br />
- LUNA top2<br />
- SELEKTA top2<br />
- TR top2 KNX<br />
- TR top2<br />
- LUNA top2<br />
- SELEKTA top2<br />
- TR top2 KNX<br />
PC set<br />
OBELISK top2<br />
Memory card<br />
OBELISK top2<br />
9070409<br />
9070404<br />
Antenna DCF77 KNX<br />
- Radio control via antenna with KNX time switches: To ensure good<br />
reception, do not install the antenna in cellars or on distribution<br />
boxes. Connection is made via separate 2-wire, unscreened<br />
high-voltage power cable (max. 100 m), up to 10 <strong>Theben</strong> top2 RC<br />
devices can be connected. Polarity, short-circuit and interruption<br />
of the antenna circuit are each visually displayed to help with<br />
installation.<br />
- ZS 600 DCF KNX Antenna DCF77 KNX 9070271<br />
Antenna top2 RC-DCF<br />
- Radio control via antenna with top2 RC devices: To ensure good<br />
reception, do not install the antenna in cellars or on distribution<br />
boxes. Connection is made via separate 2-wire, unscreened<br />
high-voltage power cable (max. 100 m), up to 10 <strong>Theben</strong> top2 RC<br />
devices can be connected. Polarity, short-circuit and interruption<br />
of the antenna circuit are each visually displayed to help with<br />
installation.<br />
Antenna top2 RC-GPS<br />
- Worldwide time synchronisation and positioning via receiving GPS<br />
satellite signal<br />
- The antenna is connected by a 2 wire cable (max. 100 m) to<br />
<strong>Theben</strong> top2 RC devices (up to 5 devices can be connected<br />
depending on device type)<br />
- A top2 GPS power unit (item number 907 0 892) is also required<br />
when connecting to TR 611 top2 RC, LUNA 121 top2 RC, LUNA<br />
122 top2 RC or SELEKTA 171 top2 RC devices<br />
- No additional power un it is required when connecting to TR<br />
641 top2 RC, TR 642 top2 RC, TR 644 top2 RC devices or several<br />
devices to one antenna<br />
- Positioning is only possible when connecting to TR 641 top2<br />
RC, TR 642 top2 RC, TR 644 top2 RC and SELEKTA 171 top2 RC<br />
devices<br />
- Can not be used with TR 611 top2 RC 24 V and SELEKTA 171 top2<br />
RC 24V<br />
Power unit top2 GPS<br />
- Required when connecting the antenna top2 RC-GPS to an individual<br />
TR 611 top2 RC, LUNA 121 top2 RC, LUNA 122 top2 RC or<br />
SELEKTA 171 top2 RC device (No additional power unit is required<br />
when connecting to a minimum of 2 devices)<br />
- Operating voltage: 230 V AC<br />
- Width: 2 modules<br />
- TR top2 RC<br />
- LUNA top2 RC<br />
- SELEKTA top2 RC<br />
- TR top2 KNX<br />
- TR top2 RC<br />
- LUNA top2 RC<br />
- SELEKTA top2 RC<br />
- TR top2 KNX<br />
- TR top2 RC<br />
- LUNA top2 RC<br />
- SELEKTA top2 RC<br />
Antenna top2 RC-DCF 9070410<br />
Antenna top2 RC-GPS 9070610<br />
Power unit top2 GPS 9070892<br />
15<br />
Additional technical data at: www.theben.de/product/ article number 247