Theben Catalogue 2014/15. Save energy – Increase comfort.

28.04.2014 Views

Home and building control Controller LUNA 131 DDC SUD 228 II Description LUNA 131 DDC - Combination sensor with analogue output signal - Can be used for brightness and temperature measurement - Each of the two measurement outputs represents a 010 V analogue output signal - The sensor can be connected directly to the analogue inputs of the PHARAO devices (24 V DC) - Controls and regulators can be programmed with the signal converter, range compare and Schmitt trigger function modules - External 24 V DC power unit required SUD 228 II - Charging switch for electric storage heaters - Adjustable charging time and backward control - If the ripple control receiver or the tariff time switch have been released for nighttime off-peak tariff, the device starts the charging program for storage heating - Charging time can be set from 09 hours - Onscreen display of charging time which is repeated every 24 hours - Backward control stops charging process at the end of off-peak period - Manual switch can be connected for daytime charging Product selection Type Article number LUNA 131 DDC 1319700 SUD 228 II 2280577 14 244 Additional technical data at: www.theben.de/product/ Article number

Home and building control Controller Technical data LUNA 131 DDC SUD 228 II Operating voltage 24 V DC 100240 V AC Frequency 5060 Hz Stand-by consumption 1,2 W Width 4 modules Installation type Surface-mounted DIN rail Type of contact NO contact Switching capacity 8 A (at 250 V AC, cos φ = 1) Measuring range brightness 1050000 lx Measuring range temperature 30 °C … +70 °C Ambient temperature 30 °C … +70 °C 0 °C … +55 °C Type of protection IP 54 IP 20 Protection class II according to EN 60 730-1 Accessories Scale drawings Connection diagrams 72 54 L N 1 2 3 4 93 80 Power unit 24 V DC ↪ Art.No.: 9079330 Details page 256 32 57 50,5 81,5 OUT 1 N LL LUNA 131 DDC SUD 228 II 14 Additional technical data at: www.theben.de/product/ Article number 245

Home and building control<br />

Controller<br />

LUNA 131 DDC<br />

SUD 228 II<br />

Description<br />

LUNA 131 DDC<br />

- Combination sensor with analogue output<br />

signal<br />

- Can be used for brightness and temperature<br />

measurement<br />

- Each of the two measurement outputs represents<br />

a 0<strong>–</strong>10 V analogue output signal<br />

- The sensor can be connected directly to the<br />

analogue inputs of the PHARAO devices<br />

(24 V DC)<br />

- Controls and regulators can be programmed<br />

with the signal converter, range compare and<br />

Schmitt trigger function modules<br />

- External 24 V DC power unit required<br />

SUD 228 II<br />

- Charging switch for electric storage heaters<br />

- Adjustable charging time and backward<br />

control<br />

- If the ripple control receiver or the tariff time<br />

switch have been released for nighttime<br />

off-peak tariff, the device starts the charging<br />

program for storage heating<br />

- Charging time can be set from 0<strong>–</strong>9 hours<br />

- Onscreen display of charging time which is<br />

repeated every 24 hours<br />

- Backward control stops charging process at<br />

the end of off-peak period<br />

- Manual switch can be connected for daytime<br />

charging<br />

Product selection<br />

Type<br />

Article number<br />

LUNA 131 DDC 1319700<br />

SUD 228 II 2280577<br />

14<br />

244<br />

Additional technical data at: www.theben.de/product/ Article number

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!