Theben Catalogue 2014/15. Save energy – Increase comfort.

Home and building control
Living comfort control, Multifunction display
Description
LUXOR 426
- Central display and control unit for the
LUXOR system
- Time, weekday, date as well as central and
automatic functions are displayed
- Current weather conditions are displayed as
well as min./max. values
- Display with back-lighting
- Favourite sites can be selected from 6 pages
- 8 channel time switch
- Heating temperature reduction in combination
with a RAMSES room thermostat
- Manual switching on the device for central
and group functions as well as manual and
automatic mode
- Daily and weekly programs
- Astronomical program (dependent on sunrise
and sunset)
- Freely programmable switching times as well
as pre-programmed astronomical switching
times
- Offset setting ± 120 min
- Easy location input via city list
- Individual link of time switch channels with
the outputs
- Time controlled positioning of drives
(LUXOR 408 S/409 S) as well as transmission
of dimming values (LUXOR 405)
as percentage values
- Blocking times for suppression of brightness
or twilight signals from sensor module
(LUXOR 411)
- Astronomical blocking times for time shifts
for moving shutters/awnings up and down
- Automatic changeover summer/winter time
- PIN code
- Installation in flush-mounted socket
Product selection
Type
Article number
Technical data
LUXOR 426
LUXOR 426 4260000
Operating voltage
Frequency
Installation type
Stand-by consumption
230 V AC
50 Hz
Wall installation or on flush-mounted socket
1,1 W
Number of channels 8
Connection for COM
Number of memory
locations
Program
EIB/KNX bus line type YCYM or Y(ST)Y or
communication line J-Y(ST)Y/length up to 100 m
350
Weekly program
Ambient temperature –5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 335
Scale drawings
45,6
18,1
128 4
93,4
13
236
Additional technical data at: www.theben.de/product/ Article number