Theben Catalogue 2014/15. Save energy – Increase comfort.

28.04.2014 Views

Home and building control KNX, Weather station, brightness sensor Description - Weather forecast receiver - Recieves weather data of the HKW via longwave on hours of sunlight, probability of rain, wind speeds and temperatures (This service is not available in all European countries. Find out more at www.efr.de/en) - Weather forecasts for the next 3 days are shown in 6 hour blocks - In addition, weather scenarios such as „fi ne“, „cloudy“, „rainy“, among others, and storm warnings are also received - Data can be visualised purely for information purposes - By using the data, heating and shade can be controlled with foresight - Exact time entry in the KNX system thanks to a time signal sent with the weather data Meteodata 139 KNX Product selection Technical data Type Article number Meteodata 139 KNX Meteodata 139 KNX 1399200 Operating voltage KNX Bus voltage, ≤12 mA Ambient temperature 20 °C … +55 °C Protection class III Type of protection IP 54 Scale drawings 72 54 93 80 32 57 50,5 81,5 12 214 Additional technical data at: www.theben.de/product/ Article number

Home and building control KNX, Weather station, brightness sensor Description - Light level controller - External light sensor included in delivery - For brightness-dependent controlling - 10 channels - 4 threshold values channels for connecting external KNX-sensors (e.g. temperature) - 6 logic channels - Up to 3 lights sensors can be connected - Manual operation on device - 4 keys for setting threshold and switch on/ off delay - DuoFix spring terminals - Display back light (can be turned off) - Thresholds can be shown or changed on display - PIN coding LUNA 134 KNX Product selection Technical data Type Article number LUNA 134 KNX LUNA 134 KNX 1349200 Operating voltage Frequency Operating voltage KNX Stand-by consumption Measuring range brightness On/off switching delay Width 110240 V AC 5060 Hz Bus voltage, ≤10 mA 0,8 W 1100,000 lx 020 min 3 modules Ambient temperature 5 °C … +45 °C Protection class II Type of protection IP 20 Accessories 12 Digital surface-mounted light sensor ↪ Art.No.: 9070415 Details page 253 Digital flush-mounted light sensor ↪ Art.No.: 9070456 Details page 253 Additional technical data at: www.theben.de/product/ Article number 215

Home and building control<br />

KNX, Weather station, brightness sensor<br />

Description<br />

- Weather forecast receiver<br />

- Recieves weather data of the HKW via longwave<br />

on hours of sunlight, probability of rain,<br />

wind speeds and temperatures (This service<br />

is not available in all European countries.<br />

Find out more at www.efr.de/en)<br />

- Weather forecasts for the next 3 days are<br />

shown in 6 hour blocks<br />

- In addition, weather scenarios such as „fi ne“,<br />

„cloudy“, „rainy“, among others, and storm<br />

warnings are also received<br />

- Data can be visualised purely for information<br />

purposes<br />

- By using the data, heating and shade can be<br />

controlled with foresight<br />

- Exact time entry in the KNX system thanks to<br />

a time signal sent with the weather data<br />

Meteodata 139 KNX<br />

Product selection<br />

Technical data<br />

Type<br />

Article number<br />

Meteodata 139 KNX<br />

Meteodata 139 KNX 1399200<br />

Operating voltage KNX<br />

Bus voltage, ≤12 mA<br />

Ambient temperature <strong>–</strong>20 °C … +55 °C<br />

Protection class<br />

III<br />

Type of protection IP 54<br />

Scale drawings<br />

72 54<br />

93<br />

80<br />

32 57<br />

50,5 81,5<br />

12<br />

214<br />

Additional technical data at: www.theben.de/product/ Article number

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!