Theben Catalogue 2014/15. Save energy – Increase comfort.

Home and building control
KNX, Motion detectors
SPHINX 331 S KNX
Description
- Motion detector (PIR)
- Automatic lighting control based on presence
and brightness
- Integrated bus coupling
- With constant light control
- Lighting control „movement-dependent only
„ and „movement and brightness dependent“
- Continuous constant light control/movement-dependent
- Following functions: e.g. lighting ON/ OFF,
shutters/blinds UP/DOWN, time functions
(switch-off delay), locking the motion detector,
dimming values, dimming UP/DOWN,
Master/Slave function
- Flush fi tting design (projects 4 mm from
ceiling)
SPHINX 331 S KNX
- 1 channel
SPHINX 332 S KNX
- 2 channels
- Additional programming keys can activate
the physical address via a programming
magnet (if programming is being executed
after installation)
Product selection
Technical data
Installation type Type Article number
SPHINX 331 S KNX
SPHINX 332 S KNX
Ceiling installation SPHINX 331 S KNX 1079215
SPHINX 332 S KNX 1079216
Operating voltage KNX
Setting range brightness
Light switch-off delay
Bus voltage, ≤10 mA
0–700 lx
1 s–120 min
Ambient temperature –5 °C … +45 °C
Protection class II according to EN 60 730-1
Type of protection
IP 40 (when fi tted)
Scale drawings
Detection range
68,7
4 30 3,6
76
Ø 76
Ø 76
Ø 36,9
Ø 58,4
Ø 64/68
3,5 m
■ Walking
Mounting height 2.5 m
12
Additional technical data at: www.theben.de/product/ Article number 201