Theben Catalogue 2014/15. Save energy – Increase comfort.

28.04.2014 Views

Home and building control KNX, Dimming actuators DMG 2 T KNX DME 2 T KNX DMB 1 T KNX Description Common functions - 2-way universal dimmer actuator MIX2 - For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps - Also suitable for dimming of dimmable energy-saving lamps - Also suitable for controlling fans - Up to two extension modules MIX or MIX2 can be connected to one basic module - Device and KNX bus module can be swapped independently of each other - Removable KNX bus module enables devices to be changed without reprogramming - Manual set-up and use of switching actuators is possible without KNX bus module - LED switching status display for each channel - Manual operation on device (even without bus connection) - Dimming output: 400 W/VA per channel or 800 W/VA in parallel operation - If the DMB 1 T KNX ‚Dimbooster‘ is used, the dimming output can be upgraded to 300 W/VA. Output to a maximum of 2000 W/VA by using max. 4 boosters possible - Automatic load detection (can be deactivated) - For R, L and C loads DMG 2 T KNX - Basic module MIX2 - Can be upgraded to maximum of 6 channels DME 2 T KNX - Extension module MIX2 - For upgrading to maximum of 6 channels DMB 1 T KNX - 1 channel dimming output extension module ”Dimmbooster“ - For extending the output of basic and extension dimming actuators up to 300 W/VA per channel. Extending output to a maximum of 2000 W/VA by using max. 4 boosters possible Product selection Type Article number DMG 2 T KNX 4930270 DME 2 T KNX 4930275 DMB 1 T KNX 4930279 12 Technical data DMG 2 T KNX DME 2 T KNX DMB 1 T KNX Operating voltage KNX Bus voltage, ≤10 mA Operating voltage Frequency 230 V AC 50 Hz Stand-by consumption 0,9 W 0,6 W 0,2 W Width 4 modules 1 module Lamp types Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LED Incandescent, low-voltage and high-voltage halogen and dimmable LED Switching capacity per channel 400 W 300 W/VA Switching capacity in parallel operation 800 W 184 Additional technical data at: www.theben.de/product/ Article number

Home and building control KNX, Dimming actuators DMG 2 T KNX DME 2 T KNX DMB 1 T KNX Switching capacity dimmable energy saving lamps per channel Switching capacity dimmable energy saving lamps in parallel operation Switching capacity dimmable 230 V LED per channel Switching capacity dimmable 230 V LED in parallel operation Switching capacity min. 80 W 140 W 60 W 120 W 5 W Ambient temperature 5 °C … +45 °C Type of protection IP 20 Protection class II according to EN 60 669 Connection diagrams 3 4 5 L N C1 3 4 5 L N C1 3 4 5 L N C1 6 7 L C2 8 N KNX 6 7 L C2 8 N 6 7 L C2 8 N KNX L N L N ≤2x400 W N L1 L2 ≤2x400 W N L1 L2 ≤800 W N L1 L2 DMG 2 T KNX DME 2 T KNX DMG 2 T KNX 3 4 5 L N C1 3 4 5 L N C1 DMG 2 T KNX DMB 1 T DMB 1 T 6 7 L C2 8 N 6 7 L C2 8 N KNX N N L N L´ L L´ L ≤800 W N L1 L2 ≤2x700 W N L1 L2 DME 2 T KNX DMG 2 T KNX, DMB 1 T KNX 3 4 5 L N C1 DMG 2 T KNX DMB 1 T DMB 1 T DMB 1 T DMB 1 T 12 6 7 L C2 8 N KNX N N N N L N L´ L L´ L L´ L L´ L ≤2000 W N L1 L2 DMG 2 T KNX Additional technical data at: www.theben.de/product/ Article number 185

Home and building control<br />

KNX, Dimming actuators<br />

DMG 2 T KNX DME 2 T KNX DMB 1 T KNX<br />

Description<br />

Common functions<br />

- 2-way universal dimmer actuator MIX2<br />

- For dimming dimmable LED, incandescent<br />

lamps, LV, HV halogen lamps and <strong>energy</strong><br />

saving lamps<br />

- Also suitable for dimming of dimmable<br />

<strong>energy</strong>-saving lamps<br />

- Also suitable for controlling fans<br />

- Up to two extension modules MIX or MIX2<br />

can be connected to one basic module<br />

- Device and KNX bus module can be swapped<br />

independently of each other<br />

- Removable KNX bus module enables devices<br />

to be changed without reprogramming<br />

- Manual set-up and use of switching actuators<br />

is possible without KNX bus module<br />

- LED switching status display for each<br />

channel<br />

- Manual operation on device (even without<br />

bus connection)<br />

- Dimming output: 400 W/VA per channel or<br />

800 W/VA in parallel operation<br />

- If the DMB 1 T KNX ‚Dimbooster‘ is used,<br />

the dimming output can be upgraded to<br />

300 W/VA. Output to a maximum of<br />

2000 W/VA by using max. 4 boosters<br />

possible<br />

- Automatic load detection<br />

(can be deactivated)<br />

- For R, L and C loads<br />

DMG 2 T KNX<br />

- Basic module MIX2<br />

- Can be upgraded to maximum of 6 channels<br />

DME 2 T KNX<br />

- Extension module MIX2<br />

- For upgrading to maximum of 6 channels<br />

DMB 1 T KNX<br />

- 1 channel dimming output extension module<br />

”Dimmbooster“<br />

- For extending the output of basic and extension<br />

dimming actuators up to 300 W/VA<br />

per channel. Extending output to a maximum<br />

of 2000 W/VA by using max. 4 boosters<br />

possible<br />

Product selection<br />

Type<br />

Article number<br />

DMG 2 T KNX 4930270<br />

DME 2 T KNX 4930275<br />

DMB 1 T KNX 4930279<br />

12<br />

Technical data<br />

DMG 2 T KNX DME 2 T KNX DMB 1 T KNX<br />

Operating voltage KNX Bus voltage, ≤10 mA <strong>–</strong><br />

Operating voltage<br />

Frequency<br />

230 V AC<br />

50 Hz<br />

Stand-by consumption 0,9 W 0,6 W 0,2 W<br />

Width 4 modules 1 module<br />

Lamp types<br />

Incandescent, low-voltage and high-voltage halogen and<br />

dimmable <strong>energy</strong> saving lamps and LED<br />

Incandescent, low-voltage and<br />

high-voltage halogen and dimmable LED<br />

Switching capacity per channel 400 W 300 W/VA<br />

Switching capacity in parallel operation 800 W <strong>–</strong><br />

184<br />

Additional technical data at: www.theben.de/product/ Article number

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!