Theben Catalogue 2014/15. Save energy – Increase comfort.

Home and building control
KNX, Switching actuators
RMG 4 I KNX
RME 4 I KNX
Description
Common functions
- 4-way C load switching actuator MIX2
- With current recognition
- For higher lamp loads
- Up to two extension modules MIX or MIX2
can be connected to one basic module
- Device and KNX bus module can be swapped
independently of each other
- Removable KNX bus module enables devices
to be changed without reprogramming
- Manual set-up and use of switching actuators
is possible without KNX bus module
- LED switching status display for each
channel
- Manual operation on device (even without
bus connection)
- Switching functions: On/Off, pulse,
On/Off delay, staircase light with warning
- Logical links: e.g. lock, AND, release, OR
RMG 4 I KNX
- Basic module MIX2
- Can be upgraded to maximum of
12 channels
RME 4 I KNX
- Extension module MIX2
- For upgrading to maximum of 12 channels
Product selection
Technical data
Type
Article number
RMG 4 I KNX
RME 4 I KNX
RMG 4 I KNX 4930210
Operating voltage KNX Bus voltage, ≤10 mA –
RME 4 I KNX 4930215
Operating voltage
Frequency
110–240 V AC
50–60 Hz
Stand-by consumption 1,3 W 0 W
Width
Type of contact
4 modules
NO contact, 16 A (at 250 V AC, cos φ = 1),
10 A (at 250 V AC, cos φ = 0,6)
Ambient temperature –5 °C … +45 °C
Type of protection IP 20
Protection class II according to EN 60 730-1
12
Connection diagrams
3 4
5 6
3 4
5 6
C1
C2
C1
C2
7 8 9 10
C3 C4
KNX
7 8 9 10
C3 C4
L
N
L
N
N
L
L
N
L
L
RMG 4 I KNX
RME 4 I KNX
178
Additional technical data at: www.theben.de/product/ Article number