CC-E0013(LA) Black Eyeliner - Lubrizol

Black Eyeliner
CC-E0013(LA)
Avalure* UR 450 Polymer is featured in this eyeliner and contributes to long-wear properties and water resistance, yet is easy to remove
with makeup remover.
:
INCI Name, Trade Name Weight % Function
A. 1. Deionized Water 66.18 Diluent
2. Disodium EDTA 0.02 Chelating Agent
3. Hydroxyethylcellulose,
Natrosol ® 250 HX
0.20 Thickener
4. Triethanolamine (99%) 2.20 Neutralizer
5. Panthenol,
DL-Panthenol 50L
6. PPG-17/IPDI/DMPA Copolymer,
Avalure* UR 450 Polymer
7. PVP,
PVP K-90 Powder
B. 8. Triethoxycaprylylsilane (and) Iron Oxides,
Black Iron Oxide AS
0.50 Conditioner
6.00 Film Former
1.00 Film Former
10.00 Pigment
C. 9. Stearic Acid 5.00 Emulsifier
10. Ceresine,
Ceresine 136D
11. Glyceryl Stearate,
Cutina ® GMS
12. Beeswax,
Bees Wax S-7205
13. Copernicia Cerifera (Carnauba) Wax,
Carnauba Wax Type I
14. Methylparaben,
Nipagin ® M
15. Propylparaben,
Nipasol M
D. 16. Phenoxyethanol,Methylparaben, Butylparaben,
Ethylparaben, Propylparaben (and)
Isobutylparaben,
Euxyl ® K 300
- Continued Next Page -
0.80 Structurant
1.50 Emulsifier
4.00 Structurant
2.00 Structurant
0.20 Preservative
0.10 Preservative
0.30 Preservative
Product Properties:
Appearance
Black cream
pH 7.8 – 8.3
Viscosity (mPa·s)** 15,000 – 45,000
Specific Gravity 1.0655 g/cm³
Recommended
Packaging: Eyeliner package with small brush
Stability: Passed 2 months @ 45°C (ongoing), Passed 1
week @ 60°C, Passed 4 freeze/thaw cycles
**Brookfield RVT DV- II+ Pro @ 20 rpm, 25°C, #7 spindle,
measured after 24 hours
Supplier References:
Akim de México (2)
Ashland Aqualon (3)***
Conjunto Lar (4, 9, 11)
DSM (5)
Lubrizol Advanced Materials, Inc.
(Noveon ®* Consumer Specialties) (6)
BASF (7)
LCW Sensient Cosmetic Technologies (8)
Multiceras (10, 12, 13)
Clariant (14, 15)****
Schülke & Mayr GmbH (16)
***distributed by Chemcel (Mexico)
**** distributed by Conjunto Lar (Mexico)
CC-E0013(LA)
Edition: October 5, 2010
Previous Formula Number: CC-E0012(LA)
Previous Edition: September 14, 2010
Reference #: Amended: NM0280-004-10 Page 107,
Formula LS070110-A (LCSA)
Original Edition: July 1, 2010
For more information visit www.personalcare.noveon.com or contact
your nearest Lubrizol Advanced Materials location.
North America
9911 Brecksville Road
Cleveland, OH 44141-3247
TEL: 216.447.5000
TEL: 800.379.5389
FAX: 216.447.5250
Mexico
Avenida Interceptor Pte. #69
Parque Industrial ‘La Joya’
Cuautitlán, Izcalli - Mexico City
Edo. de México 54730, México
TEL: 52.55.3067.0860
FAX: 52.55.5870.8956
Brazil
Av. Fagundes Filho
134 - Cj. 101, 10th floor
Edificio Victoria Office Center
São Judas, 04304-010 São Paulo
TEL: 55.11.4082.1330
FAX: 55.11.4082.1345
Europe, Middle East
and Africa
Chaussée de Wavre, 1945
B-1160 Brussels, Belgium
TEL: 32.2.678.19.11
FAX: 32.2.678.20.02
Asia Pacific
1107-1110 Shui On Centre
6-8 Harbour Road
Wanchai, Hong Kong
TEL: 852.2508.1021
FAX: 852.2512.2241
South Asia
501 & 501A, Omega
Hiranandani Business Park
Powai
Mumbai 400 076 India
TEL: 91.22.6698.0590 / 91
FAX: 91.22.6602.7888
China
27/F Majesty Building
No. 138 Pudong Avenue
Shanghai 200120, PRC
TEL: 86.21.3866.0366
FAX: 86.21.5887.6981
The information contained herein is believed to be reliable, but no representations, guarantees or warranties of any kind are made as to its accuracy, suitability for particular applications or the results to be obtained. The information often is based on
laboratory work with small-scale equipment and does not necessarily indicate end product performance or reproducibility. Formulations presented may not have been tested for stability and should be used only as a suggested starting point. Because of the
variations in methods, conditions and equipment used commercially in processing these materials, no warranties or guarantees are made as to the suitability of the products for the applications disclosed. Full-scale testing and end product performance are
the responsibility of the user. Lubrizol Advanced Materials, Inc. shall not be liable for and the customer assumes all risk and liability for any use or handling of any material beyond Lubrizol Advanced Materials, Inc.’s direct control. The SELLER MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Nothing contained herein is to be considered as permission,
recommendation, nor as an inducement to practice any patented invention without permission of the patent owner.
Lubrizol Advanced Materials, Inc. is a wholly owned subsidiary of The Lubrizol Corporation
Noveon is a registered trademark of The Lubrizol Corporation
*Trademark owned by The Lubrizol Corporation
© Copyright 2010 Lubrizol Advanced Materials, Inc.

Black Eyeliner
CC-E0013(LA)
Procedure:
1. PART A: Add Deionized Water to a suitable mixing vessel.
2. Disperse Natrosol ® 250 HX with mixing. Mix until uniformly dispersed and until no lumps appear.
3. Add Triethanolamine(99%) and mix until the polymer hydrated and clear.
4. Add Panthenol and mix until dissolved.
5. Add Avalure* UR 450 Polymer and continue mixing until the mixture is uniform.
6. Add PVP powder with mixing. Mix until all of the powder is in the solution and batch is uniform.
7. Heat batch to 75°C with mixing.
8. PART C: In a side vessel, mix all of the PART C (oil phase) ingredients and heat to 75°C. Mix
until uniform.
9. Add PART B to PART C with mixing. Mix until the pigment is completely wetted and uniform.
10. When PART A and PART B/C are both at 75°C, add PART B/C to PART A. Mix until uniform.
11. Continue mixing batch and begin cooling to 40°C.
12. When batch has cooled to 40°C, add Euxyl ® K 300. Mix until uniform.
13. Continue cooling batch to room temperature and pour into desired package.