VOLVO WHEEL LOADERS

L90F
GENERAL PURPOSE
LIGHT MATERIAL
Tires 20.5 R25 L2
LONG
BOOM
Bolt-on
edges
Teeth
Bolt-on
edges
Bolt-on
edges
Bolt-on
edges
Bolt-on
edges
Bolt-on
edges
Bolt-on
edges
Bolt-on
edges
Volume, heaped ISO/SAE m 3 2,3 2,5 2,5 2,5 2,6 2,7 2,7 4,1 7,0 –
Volume at 110% fill factor m 3 2,5 2,8 2,8 2,8 2,9 3,0 3,0 4,5 7,7 –
Static tipping load, straight kg 10 700 10 740 11 210 10 520 10 550 10 430 11 180 10 130 9840 –1650
at 35° turn kg 9470 9500 9 940 9300 9320 9200 9910 8920 8610 –1500
at full turn kg 9100 9140 9570 8940 8960 8840 9540 8560 8240 –1460
Breakout force kN 113,1 112,4 118,5 108,5 106,5 104,5 113,7 84,4 73,0 +2,0
A mm 7550 7810 7510 7610 7640 7670 7560 8000 8300 +410
E mm 1200 1430 1160 1250 1280 1300 1200 1600 1860 –6,0
H*) mm 2820 2650 2850 2780 2750 2740 2820 2530 2320 +420
L mm 5380 5460 5370 5430 5460 5490 5430 5560 5760 +420
M*) mm 1130 1310 1090 1170 1180 1210 1130 1470 1670 –50
N*) mm 1700 1770 1680 1720 1720 1730 1690 1740 1730 +360
V mm 2650 2650 2650 2650 2650 2750 2750 2750 3000 –
a 1
clearance circle mm 11 860 12 000 11 840 11 890 11 900 12 010 11 950 12 200 12 600 –
Operating weight kg 15 170 15 170 14 980 15 220 15 250 15 340 14 970 15 460 15 890 +250
*) Measured to the tip of the bucket teeth or bolt-on edge. Dump height to bucket edge. Note: This only applies to genuine Volvo attachments. .
Measured at 45° dump angle.
Bucket Selection Chart
The chosen bucket is determined by the density of the material and the
expected bucket fill factor. The actual bucket volume is often larger than
the rated capacity, due to the features of the TP linkage, including an open
bucket design, good rollback angles in all positions and good bucket filling
performance. The example represents a standard boom configuration.
Example: Sand and gravel. Fill factor ~ 105%. Density 1,65 t/m 3 . Result: The
2,7 m 3 bucket carries 2,8 m 3 . For optimal stability always consult the bucket
selection chart.
Material Bucket fill, %
Earth/Clay ~ 110
Sand/Gravel ~ 105
Aggregate ~ 100
Rock ≤100
Material
density,
t/m 3
~ 1,80
~ 1,70
~ 1,65
~ 1,80
~ 1,70
~ 1,65
~ 1,80
~ 1,70
~ 1,65
ISO/SAE
bucket volume,
m 3
2,5
2,6
2,7
2,5
2,6
2,7
2,5
2,6
2,7
Actual volume,
m 3
~ 2,7
~ 2,9
~ 3,0
~ 2,6
~ 2,7
~ 2,8
~ 2,5
~ 2,6
~ 2,7
~ 1,80 2,2 ~ 2,2
The size of rock buckets is optimized for optimal penetration and filling capability
rather than the density of the material.
Supplemental Operating Data
Tires 20.5 R25 L2
Standard boom
Long boom
650/65 R25 650/65 R25
Width over tires mm +200 +200
Ground clearance mm 0 0
Tipping load, full turn kg +400 +360
Operating weight kg +600 +600
32