VOLVO WHEEL LOADERS

More documents

Recommendations

Info

Volvo L60F, L70F, L90F IN DETAIL Cab Instrumentation: All important information is centrally located in the operator’s field of vision. Display for Contronic monitoring system. Heater and defroster: Heater coil with filtered fresh air and fan with auto and 11 speeds. Defroster vents for all window areas. Operator’s seat: Operator’s seat with adjustable suspension and retractable seatbelt. The seat is mounted on a bracket on the rear cab wall and floor. The forces from the retractable seatbelt are absorbed by the seat rails. Standard: The cab is tested and approved according to ROPS (ISO 3471, SAE J1040), FOPS (ISO 3449). The cab meets with requirements according to ISO 6055 (Operator overhead protection - Industrial trucks) and SAE J386 (”Operator Restraint System”). L60F Emergency exit Sound level in cab according to ISO 6396 Sound level in cab according to ISO 6396 External sound level according to ISO 6395 External sound level according to ISO 6395 Ventilation Heating capacity Air conditioning (optional) L70F Emergency exit Sound level in cab according to ISO 6396 Sound level in cab according to ISO 6396 External sound level according to ISO 6395 External sound level according to ISO 6395 Ventilation Heating capacity Air conditioning (optional) L90F Emergency exit Sound level in cab according to ISO 6396 Sound level in cab according to ISO 6396 External sound level according to ISO 6395 External sound level according to ISO 6395 Ventilation Heating capacity Air conditioning (optional) Use emergency hammer to break window LpA 68 dB (A)* LpA 70 dB (A) LwA 104 dB (A)* LwA 107 dB (A) 9 m 3 /min 11 kW 8 kW Use emergency hammer to break window LpA 68 dB (A)* LpA 70 dB (A) LwA 105 dB (A)* LwA 108 dB (A) 9 m 3 /min 11 kW 8 kW Use emergency hammer to break window LpA 68 dB (A)* LpA 70 dB (A) LwA 105 dB (A)* LwA 108 dB (A) 9 m 3 /min 11 kW 8 kW Lift arm system Torque Parallel linkage (TP linkage) with high breakout torque and parallel action throughout the entire lifting range. L60F Lift cylinders 2 Cylinder bore Piston rod diameter Stroke 110 mm 70 mm 665 mm Tilt cylinder 1 Cylinder bore Piston rod diameter Stroke L70F 150 mm 80 mm 444 mm Lift cylinders 2 Cylinder bore Piston rod diameter Stroke 110 mm 70 mm 756 mm Tilt cylinder 1 Cylinder bore Piston rod diameter Stroke L90F 160 mm 90 mm 432 mm Lift cylinders 2 Cylinder bore Piston rod diameter Stroke 120 mm 70 mm 733 mm Tilt cylinder 1 Cylinder bore Piston rod diameter Stroke 180 mm 90 mm 430 mm * with optional noise reduction kit EU 24
Hydraulic system System supply: Two load-sensing axial piston pumps with variable displacement. The steering function always has priority. Valves: Double-acting 2-spool valve. The main valve is controlled by a 2-spool pilot valve. Lift function: The valve has four positions; lift, hold, lower, and float position. Inductive/magnetic automatic boom kick-out can be switched on and off and is adjustable to any position between maximum reach and full lifting height. Tilt function: The valve has three functions: rollback, hold and dump. Inductive/magnetic automatic tilt can be adjusted to the desired bucket angle. Cylinders: Double-acting cylinders for all functions. Filter: Full-flow filtration through 20 micron (absolute) filter cartridge. L60F Working pressure, maximum Flow at engine speed Pilot system, working pressure Cycle times Raise* Tilt* Lower, empty Total cycle time L70F Working pressure, maximum Flow at engine speed Pilot system, working pressure Cycle times Raise* Tilt* Lower, empty Total cycle time 26,0 MPa 145 l/min 10 MPa 32 r/s (1900 r/min) 3,0 MPa 4,5 s 2,3 s 2,9 s 9,7 s 26,0 MPa 154 l/min 10 MPa 32 r/s (1900 r/min) 3,0 MPa 5,3 s 1,3 s 2,7 s 9,3 s Steering system Steering system: Load-sensing hydrostatic articulated steering. System supply: The steering system has priority feed from a load-sensing axial piston pump with variable displacement. Steering cylinders: Two double-acting cylinders. L60F Steering cylinders 2 Cylinder bore Rod diameter Stroke Working pressure Maximum flow 70 mm 45 mm 386 mm 21 MPa 145 l/min Maximum articulation ±40° L70F Steering cylinders 2 Cylinder bore Rod diameter Stroke Working pressure Maximum flow 70 mm 45 mm 386 mm 21 MPa 154 l/min Maximum articulation ±40° L90F Steering cylinders 2 Cylinder bore Rod diameter Stroke Working pressure Maximum flow 80 mm 50 mm 345 mm 21 MPa 162 l/min Maximum articulation ±40° L90F Working pressure, maximum Flow at engine speed Pilot system, working pressure Cycle times Raise* Tilt* Lower, empty Total cycle time 26,0 MPa 162 l/min 10 MPa 32 r/s (1900 r/min) 3,0 MPa 5,4 s 2,1 s 2,5 s 10,0 s * with load as per ISO 14397 25
Page 1 and 2: VOLVO WHEEL LOADERS L60F, L70F, L90
Page 4: “F” FOR FLEXIBILITY Many have t
Page 8: POWER YOUR CREATIVITY Volvo’s in-
Page 12: PROTECT YOUR PRODUCTIVITY The new g
Page 16: DON’T DISTURB YOUR ENVIRONMENT. P
Page 19 and 20: Care Cab is a more effective workpl
Page 21 and 22: JOB SATISFACTION COMES STANDARD. HE
Page 23: Drivetrain Torque converter: single
Page 28 and 29: SPECIFICATIONS Tires: 20.5 R25 L2 S
Page 30 and 31: L60F GENERAL PURPOSE GRADING LIGHT
Page 32 and 33: L90F GENERAL PURPOSE LIGHT MATERIAL
Page 34 and 35: Hydraulic system L60F L70F L90F Mai
Page 36: Volvo Construction Equipment is dif

VOLVO WHEEL LOADERS

Create successful ePaper yourself

Delete template?

Save as template?