A Using the Robosapien™ remote controller with ... - WowWee

A Using the Robosapien™ remote controller with ... - WowWee A Using the Robosapien™ remote controller with ... - WowWee

theoldrobots.com
from theoldrobots.com More from this publisher
24.04.2014 Views

Using the Robosapien remote controller with Femisapien You cam use the WowWee Robosapien remote controller (included) to control Femisapien. Battery details The remote controller requires 3 x “AAA” size batteries. To install the batteries, do the following: 1. 2. Open the battery compartment located on the underside of the remote controller using a Phillips screwdriver (not included) to remove the screws on the battery compartment cover. Insert the batteries according to the diagram. Ensure that the positive and negative polarities match the illustrations inside the battery compartment. 1.5V "AAA" LR03 UM4 1.5V "AAA" LR03 UM4 1.5V "AAA" LR03 UM4 Battery compartment door 3. Replace the battery compartment covers and replace the screws using the screwdriver. Do not over-tighten. Shift levels The remote controller has 3 shift levels. You can change levels by pressing the SELECT Select button . The LED on the remote controller indicates the shift level as explained in Table 1, below. Table 1 LED Color Shift level Level 1 Green Level 2 Red Level 3 IMPORTANT: After you send a command the remote controller will reset to Shift level 1. That is, if you require Shift level 2 or 3, you need to select the shift level each time you send a command. A

<strong>Using</strong> <strong>the</strong> Robosapien <strong>remote</strong> <strong>controller</strong> <strong>with</strong> Femisapien<br />

You cam use <strong>the</strong> <strong>WowWee</strong> Robosapien <strong>remote</strong> <strong>controller</strong> (included) to control<br />

Femisapien.<br />

Battery details<br />

The <strong>remote</strong> <strong>controller</strong> requires 3 x “AAA” size batteries. To install <strong>the</strong> batteries, do<br />

<strong>the</strong> following:<br />

1.<br />

2.<br />

Open <strong>the</strong> battery compartment located on<br />

<strong>the</strong> underside of <strong>the</strong> <strong>remote</strong> <strong>controller</strong> using a<br />

Phillips screwdriver (not included) to remove<br />

<strong>the</strong> screws on <strong>the</strong> battery compartment cover.<br />

Insert <strong>the</strong> batteries according to <strong>the</strong> diagram.<br />

Ensure that <strong>the</strong> positive and negative polarities<br />

match <strong>the</strong> illustrations inside <strong>the</strong> battery<br />

compartment.<br />

1.5V "AAA"<br />

LR03 UM4<br />

1.5V "AAA"<br />

LR03 UM4<br />

1.5V "AAA"<br />

LR03 UM4<br />

Battery<br />

compartment<br />

door<br />

3.<br />

Replace <strong>the</strong> battery compartment covers and<br />

replace <strong>the</strong> screws using <strong>the</strong> screwdriver. Do<br />

not over-tighten.<br />

Shift levels<br />

The <strong>remote</strong> <strong>controller</strong> has 3 shift levels. You can change levels by pressing <strong>the</strong><br />

SELECT<br />

Select button . The LED on <strong>the</strong> <strong>remote</strong> <strong>controller</strong> indicates <strong>the</strong> shift level as<br />

explained in Table 1, below.<br />

Table 1<br />

LED Color<br />

Shift level<br />

Level 1<br />

Green Level 2<br />

Red Level 3<br />

IMPORTANT: After you send a command <strong>the</strong> <strong>remote</strong> <strong>controller</strong> will reset to Shift<br />

level 1. That is, if you require Shift level 2 or 3, you need to select <strong>the</strong> shift level each<br />

time you send a command.<br />

A


Remote <strong>controller</strong> overview<br />

LED transmitter<br />

1<br />

LED shift indicator<br />

3<br />

5<br />

7<br />

9<br />

PICK UP<br />

HIGH 5<br />

THROW<br />

BURP<br />

LEAN<br />

THUMP SWEEP<br />

STRIKE 1<br />

SLEEP LISTEN<br />

STRIKE 2 STRIKE 2<br />

THUMP SWEEP<br />

LEAN STRIKE 1<br />

PICK UP<br />

TALK BACK<br />

THROW<br />

WHISTLE<br />

2<br />

4<br />

6<br />

8<br />

10<br />

11<br />

STEP<br />

BULLDOZER<br />

12<br />

TURN<br />

STEP<br />

RESET<br />

TURN<br />

STEP<br />

14<br />

13<br />

STRIKE 3<br />

STRIKE 3<br />

15<br />

BACK<br />

STEP<br />

OOPS<br />

16<br />

SELECT<br />

Shift select<br />

18<br />

RIGHT<br />

LEFT<br />

17<br />

SONIC<br />

DANCE<br />

19<br />

EXECUTE<br />

DEMO<br />

1<br />

2<br />

DEMO<br />

ALL DEMO<br />

20<br />

WAKE UP<br />

POWER OFF<br />

B


Remote <strong>controller</strong> functions<br />

The control functions for each level are explained in <strong>the</strong> following table (Table 2).<br />

NOTE: Right refers to Femisapien’s right and left refers to her left.<br />

Table 2<br />

Button Icon Shift level 1 Shift level 2 Shift level 3<br />

1 Right arm moves up<br />

one stop.<br />

Right arm moves<br />

up.<br />

2 Left arm moves up<br />

one stop.<br />

3 Right arm moves<br />

down one stop.<br />

4 Left arm moves<br />

down one stop.<br />

5 Right arm moves up,<br />

left arm moves back.<br />

6 Left arm moves up,<br />

right arm moves<br />

back.<br />

7 Leans to <strong>the</strong> right,<br />

one stop.<br />

Left arm moves<br />

up.<br />

Right arm moves<br />

down.<br />

Left arm moves<br />

down.<br />

Right arm moves<br />

out, left arm<br />

moves up.<br />

Left arm moves<br />

out, right arm<br />

moves up.<br />

8 Leans to <strong>the</strong> left, one<br />

stop.<br />

9 Both arms move up. Leans forward.<br />

10 Both arms move<br />

down.<br />

11 Forward walk<br />

(<strong>with</strong>out avoidance).<br />

Leans backward.<br />

Slow forward<br />

walk <strong>with</strong><br />

avoidance.<br />

Forward strut <strong>with</strong><br />

avoidance.<br />

C


Button Icon Shift level 1 Shift level 2 Shift level 3<br />

12 Clockwise pivot turn. Clockwise step<br />

turn.<br />

Forward, clockwise,<br />

circular walk.<br />

13 Stop. Stop. Stop<br />

14 Counter-clockwise<br />

pivot turn.<br />

Counterclockwise<br />

step<br />

turn.<br />

Forward, counterclockwise,<br />

circular<br />

walk.<br />

15 Backward walk Backward walk Backward strut<br />

<strong>with</strong> avoidance.<br />

16 Turns <strong>the</strong> volume<br />

down.<br />

“Beep” routine.<br />

17 “Are you talking<br />

to me?” routine.<br />

18 Turns <strong>the</strong> volume up. “Hey, look at<br />

me!” routine.<br />

19 Enters Learning<br />

Mode.<br />

NOTE: You do not<br />

need to change<br />

Femispien’s head<br />

position.<br />

20 Plays back <strong>the</strong> last<br />

saved program.<br />

To learn more about <strong>the</strong> functions, refer to <strong>the</strong> Femisapien user manual.<br />

© 2009 <strong>WowWee</strong> Group Limited<br />

D

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!