Bar Code Reader Models 1000/1002 - BarcodeMuseum.com

More documents

Recommendations

Info

DIAGNOSTICS This option executes a self-test program which performs the following tests on the reader: * EPROM Version Number * Internal and External Ram Test * EPROM Checksum Test * Character Set Test * Buzzer Test The above tests are performed and their status is displayed on the PC monitor. NOTE: Exit your application program and return to DOS before enabling this test. 28
SPECIFICATIONS BAR CODES SUPPORTED Auto-discriminates between all of the following codes: - Code 39 - Extended Code 39 (Full ASCII) - Interleaved 2 of 5 (Variable and Fixed Length, Check Digit) - UPC-A (Including 2 and 5 Character Supplements) - UPC-E(0), UPC-E(1) (Including 2 and 5 Character Supplements) - EAN (Including 2 and 5 Character Supplements) - Code 128 (UCC-128 Verification, Check Digit) - Codabar - Code 93 - Code 11 - MSI/Plessey INPUT DEVICES SUPPORTED Wands (Visible and Infrared) Slot Readers (Or Badge Readers) USER PROGRAMMABLE FEATURES All features are easily programmed with a bar code menu: Bar Code Selection: Preamble (15 Chars Max) - Enable/Disable Postamble (15 Chars Max) - Length Computer Type - Check Digit Keyboard Type (US & Foreign) - Start/Stop Transmit Transmit Speed Beep Tone and Length User Defined Termination Char. INDICATORS Audio "BEEP" indicates Successful Read A Red/Green LED Indicates Status of Reader POWER REQUIREMENTS Reader Receives its Power from the Personal Computer Keyboard Interface. CONNECTORS Wand: 5 Pin DIN Style Keyboard Interface: M1000 = 5 Pin DIN Style M1002 = 6 Pin MINI-DIN Style ENVIRONMENTAL Operating Temperature: Storage Temperature: Relative Humidity: 0 o to +50 o C -30 o to +70 o C 5% to 95% (Non-Condensing) PHYSICAL SPECIFICATIONS Weight: 14 Ounces Width: 5 1/8 Inches Length: 5 1/4 Inches Height: 1 1/2 Inches 29
Page 1 and 2: Bar Code Reader Models 1000/1002 US
Page 3 and 4: TABLE OF CONTENTS Introduction ....
Page 5 and 6: INTRODUCTION The Model 1000/1002 ba
Page 7 and 8: Step 5: CONNECTING INPUT DEVICES: I
Page 9 and 10: SCANNING BAR CODES WAND SCANNING St
Page 11 and 12: DEFAULT SETTINGS The Model 1000/100
Page 13 and 14: CHANGING THE DEFAULT SETTINGS You c
Page 15 and 16: PROGRAMMING GUIDE START The START b
Page 17 and 18: UPC 0) UPC DECODER ON * Enable read
Page 19 and 20: UPC/EAN SUPPLEMENTS 0) SUPPLEMENTS
Page 21 and 22: CODABAR 0) CODABAR DECODER ON * Ena
Page 23 and 24: MSI/PLESSEY 0) MSI/PLESSEY DECODER
Page 25 and 26: PREAMBLE POSTAMBLE 0) ENTER PREAMBL
Page 27 and 28: TERMINATION CHARACTER The optional
Page 29 and 30: OTHER OPTIONS 0) SEND BAR CODE TYPE
Page 31: NOTE The KEYBOARD AUTO CAPS/NUM LOC
Page 35 and 36: APPENDIX A - FUNCTION & SPECIAL KEY
Page 37 and 38: CODE 39 CHARACTER SET: An optional
Page 39 and 40: APPENDIX C - FULL ASCII EXTENSION T
Page 41 and 42: The last digit in UPC bar codes is
Page 43 and 44: APPENDIX E - EAN SPECIFICATIONS The
Page 45 and 46: OPTIONAL CHECK DIGIT: Interleaved 2
Page 47 and 48: APPENDIX H - CODE 128 SPECIFICATION
Page 49 and 50: CODE 128 (USD-6) VALUE CODE A CODE
Page 51 and 52: APPENDIX I - CODE 93 SPECIFICATIONS
Page 53 and 54: APPENDIX J - SOURCES OF BAR CODE ST

Bar Code Reader Models 1000/1002 - BarcodeMuseum.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?