Condensed Positioner USA - Koike
Condensed Positioner USA - Koike
Condensed Positioner USA - Koike
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
UBSeries<br />
Set-Up<br />
1. Find Center of Gravity<br />
for rotation.<br />
Workpiece should be placed on<br />
positioner with the center of gravity<br />
coinciding with the rotational axis of<br />
the table. Movement of the object<br />
around table rotational axis is<br />
almost effortless. In order to prevent<br />
over-travel of mounted objects,<br />
<strong>Koike</strong> Aronson has applied friction<br />
bands to the rotation point of the<br />
worktable which generates slight<br />
resistance and allows the load to be<br />
stopped at any desired point.<br />
<strong>Koike</strong> Aronson<br />
universal balance<br />
positioners allow<br />
welders to maintain<br />
the most productive<br />
10˚ downhand<br />
welding position.<br />
10˚<br />
Vertical Up—<br />
4-1/4" per min<br />
Flat—<br />
12" per min<br />
Downhand at 10˚—<br />
19"per min<br />
Workpiece<br />
Center of Gravity<br />
Rotates Easily<br />
2. Finally, balance workpiece by<br />
adjusting wormgear so tilt axis<br />
intersects center of gravity of<br />
rotational axis.<br />
0-30°<br />
By a simple adjustment to the<br />
wormgear, the tilt axis can be<br />
aligned to intersect the rotational<br />
axis. At this point, both axes<br />
intersect the object’s center of<br />
gravity and move freely in any<br />
direction.<br />
Center of Gravity<br />
of Workpiece<br />
Rotational Axis<br />
Tilt<br />
Axis<br />
A wrench adjustment to the worm<br />
on the wormgear sector will change<br />
the angle of the arm.<br />
<strong>Koike</strong> Aronson Inc.<br />
P.O. Box 307, Arcade, New York 14009<br />
Phone (585) 492-2400 Fax (585) 457-3517<br />
www.koike.com<br />
PAGE 9