Chrome - Torq Distribution

pg 163 pg 148 pg 145 pg 161
pg 152
Engine Case Covers
C h r o m e
Front End 144
Brake Covers 148
Engine 152
Rear End 156
163
License Plates
2010 Chrome Products
15
143

front End
8686
snap-on fork covers
for VTX1800
One doesn’t see many full-on customs without a gleaming chrome front end.
However, removal, disassembly, & the plating process means down time &
significant cash outlay unless you use these slick Snap-On Chrome Fork Covers!
They fit like a second skin, install in minutes, & the low price will leave you smiling!
Choose smooth, full length covers with or without turn signal mounts.
Fits: All Honda ’02-’08 VTX1800 Models
Note: Does not install with OEM chrome forks.
8685 Snap-On Fork Tube Covers, Full Length Covers (set)
$
139.99
Note: Requires relocation of turn signals.
8686 Snap-On Fork Tube Covers with Turn Signal Mounts (set)
Note: Turn signal mount allows installation of OEM turn signals, universal for
5/16"-18 mount bolt, Küryakyn Constellation Driving Lights with Turn Signals
Kit (P/N 5009 - pg 90), or universal turn signals (P/N 5011 - pg 95).
$
189.99
8685
D o n ' t F o r g e t . . .
triple tree covers
For full chrome coverage for your front
end, our Triple Tree Covers are a MUST!
See pg 146
P/N 8680
8684
lower fork
skins for VTX 1800
Create a shining first
impression! Whether parked
or in motion, your front end is
often the first thing people notice on
8684
your bike. Show it in it’s best light with these attention
grabbing chrome Lower Fork Skins. Used alone or
with our other chromed front end components, they
will reflect well on you & your VTX.
Fits: All ’02–’08 VTX1800 Models
8684 Lower Fork Skins (pr) $
135.99
Full Chrome
Coverage!
bullet fork covers
These covers are an excellent way to dress up
your forks while hiding your axle bolt & hardware at the same
time. Each bullet slips onto the end of your fork leg & attaches with a
compression set screw. Installation is that easy!
Fits: Honda: All VTX1300
Kawasaki: ’99-’09 Vulcan 800/1500 Classic/Drifter/Nomad, & VN 900 Classic('06-'10) & Custom ('07-'10)
Suzuki: All '99-'08 Intruder 1400, 1500LC, & 800 Volusia
Yamaha: All ’99-’10 Road Star 1600/1700 (except Warrior), All ’96-’01 Royal Star, ’05-’09 Royal Star Tour
Deluxe, ’99-’10 Venture, All ’98-’09 V Star 1100 Custom/Classic,’07-’09 V Star 1300 Models', 07-'09 V Star
950, & '08-'10 Raider
8678 Bullet Fork Covers (pr) $
139.99
L o o k s G r e a t W i t h . . .
front caliper cover
Complete the ribbon of luscious chrome by
adding a Front Caliper Cover along side your
new Fork Skins! See pg 148
P/N 1298
144
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

8687
lower fork skins
for VTX1300 & Vulcan 1600
Nothing gets noticed like a nice front end - so do it right with Küryakyn Lower
Fork Skins! Sleek & stylized these covers effortlessly apply a glistening layer of
chrome to your plain stock fork sliders. Very easy installation!
8690 Lower Fork Skins for Vulcan (pr)
Fits: All ’03-’08 Vulcan 1600 Models (except Mean Streak)
8687 Lower Fork Skins for VTX (set)
Fits: All ’03-’09 VTX1300C
8689 Lower Fork Skins for VTX (pr)
Fits: ’03-’09 VTX1300 Retro/S/T
Note: Does not include Upper Covers above fender mount bolts
in order to maintain clearance for OEM fork shrouds.
$
139.99
$
169.99
$
145.99
8689
8690
D o n ' t F o r g e t . . .
front caliper covers
The look just won't be complete until you add this
beautiful shiny accessory. See pg 148
spun blade spinning axle caps
Reminiscent of the great Mustang fighter planes, these spinning blades give the illusion of
flight. The chrome-plated ABS blades start to spin when the bike reaches about 25 mph. An
easy, innovative way to add some additional cool factor to your bike.
Fits: All VTX1300/1800 Models
P/N 1284 & 1282
1239 Spun Blade Spinning Axle Caps (pr) $
109.99
Note: Will not install with Küryakyn Lower Fork Skins.
C H R O M E
stiletto
axle caps
for VTX
For those with Stiletto ISO-Grip End Caps, here’s an
opportunity to make a stronger statement. Stiletto Axle
Caps fit up closely to the sliders with no unsightly gaps.
Fits: All VTX1300/1800 Models
1207 Stiletto Axle Caps (pr) $
83.99
Note: Will not install with Küryakyn Lower Fork Skins.
W W W . K U R Y A K Y N . C O M
145

neck cover for V Star 1100
A stunning replacement for the dull, stock, black components found on
your bike. The chrome-plated contours have been smoothed & molded to provide a flowing appearance.
The right side cover has a stylized teardrop shaped boss that surrounds the ignition switch & leaves just
its outer surface exposed. Simple installation.
Fits: All ’99-‘09 V Star 1100 Models
7856 Neck Cover (set) $
79.99
neck
cover for Valkyrie
This beautifully chromed delta-shaped cover neatly
hides the front tank tab & neck top. Stainless steel
mounting hardware is included to complete this
easy installation.
Fits: All ‘97-’04 Valkyrie Models (except Rune)
7855 Chrome Neck Cover for $
25.99
Valkyrie (ea)
triple tree cover sets for VTX
This is the ultimate front end dress-up kit for the VTX. We offer a 5-piece set that
includes a one-piece cover for the top triple clamp, chrome fork tube caps, & covers
for the lower triple clamp for the VTX1800C. We offer a 3-piece set that includes a
one-piece cover for the top triple clamp & a pair of die-cast fork tube caps for the
VTX1300. This kit provides the look of a custom chrome replacement triple tree set at
a fraction of the cost & with significantly less work!
Keep Your
Forks Chrome
8680 Upper & Lower Triple Tree Cover Set (pr)
$
59.99
Fits: ’02-’08 VTX1800C/F
8681 Upper Triple Tree Cover (ea)
$
59.99
Fits: ’03-’09 VTX1300R/S/T/C
Note: Requires removal of handlebar/riser assembly & headlight mount during installation.
8680
chrome fork
protector covers
for Raider
Patent Pending
When styling choices for your Raider reach a fork in the road, keep this
in mind; chrome always looks better than plain black plastic! The stock
black fork protectors are difficult & time consuming to remove but they do
help shield against nicks & scratches. These peel-&-stick chrome covers
provide a classy custom appearance while keeping the protection the
factory intended in place.
Fits: All ‘08-‘10 Yamaha Raider Models
8681
8699 Chrome Fork Protector Covers (pr) $
39.99
8680
146 C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

Fender Tip
or Chrome
Accent!
handlebar
riser accents
for M109R
Most people agree, this Cruiser is one of the greatest
available. It doesn’t need much but these easy stick-on
chrome Riser Accents sure make a difference.
Fits: ’06-’09 Suzuki M109R Models
8682 Handlebar Riser Accents (pr) $
41.99
fender
ornaments
Let your front fender take on new life with
one of our majestically sculpted fender ornaments.
Fits: Universal applications require drilling holes in
fender & hard wiring for installation
triceptor
fender accent
You decide where it looks best! Add it as a fender tip & have the cutting
edge in fender tips or move it back & add the perfect chrome accent. With
simple peel-&-stick installation this little beauty will class up your front
fender & cover unsightly stone chips.
Fits: Honda: All VTX1300/1800 & '10 VT1300 Custom Line
Yamaha: All V Star 1300/1100/650, all Road Star, all Roadliner/
Stratoliner, & Raider
Universal: 4” or wider style fenders (does not fit fenders with flat
center width)
7340 Triceptor Fender Accent (ea) $
41.99
9022 Wild Boar Fender Ornament (ea) $
49.99
9026 Eagle Fender Ornament (ea) $
45.99
3103 Replacement Bulb, #161 (ea) $
1.99
Eyes
Light Up!
front fender tip
Protection & style for your front fender. Add this chrome accent &
avoid or cover those ugly stone chips. With peel-&-stick installation,
embellish the contours of your front fender quickly & painlessly.
Fits: Honda: All VTX1800C/F, all VTX1300C & '10 VT1300 Custom Line
Yamaha: All V Star 1300/1100/650, all Road Star,
& all Roadliner/Stratoliner
Universal: 6” or wider style fenders (does not fit
fenders with flat center width)
7344 Front Fender Tip (ea) $
31.99
C H R O M E
Front & Rear
headlight visor
fender louvers for VTX
The flowing appearance of the stock VTX Retro fender
is classy but it really cries out for these precision
fitting molded chrome inserts - by far the finest
available! Don’t confuse ours with other ill-fitting, poor
quality versions on the market.
Fits: All ’03-’09 VTX1300 Retro/S/T & all ’02-’08
VTX1800 Retro/S/T Models
9018 Front Fender Louvers (set) $
29.99
9019 Rear Fender Louvers (set) $
29.99
Long, lean, & mean! That’s the illusion your
stock headlight shell will get by adding this
slick Headlight Visor. Features a nicely finished
rolled front edge with center bullet - a big
difference that will be noticed immediately.
Fastens securely to your existing headlight for
easy installation!
Fits: All ’99-’10 Road Star Models (except
Warrior), all ’98-’10 V Star 650 & '99-'09 V Star
1100 Classic Models with 7" headlamp
2182 Headlight Visor (ea) $
31.99
W W W . K U R Y A K Y N . C O M
147

Bra k e Covers
brake line
accent covers for VTX1800
Cover those bare stamped brackets holding your
front brake lines to the forks with some blood
grooved chrome.
Fits: All VTX1800 Models
7823 Brake Line Accent Covers (pr) $
39.99
front caliper cover for Honda
Details make the difference! In just a few minutes your front brake
caliper can spring to life with this brilliant chrome cover. Styled to
complement the Rear Caliper Cover, the pair provides a balanced,
integrated look. Installation is a snap with high strength peel-&-stick
adhesive.
1282 Fits: All‘03–’09 VTX1300 Retro/S/T Models &
$
39.99
'08-'10 Shadow 750 Aero Models
1284 Fits: All‘03–’09 VTX1300C Models & '08-'10
Shadow 750 Spirit/ Phantom Models
$
39.99
brake
bleeder
screw
cover &
banjo bolt cover
2018
2015
Easily installed, these pieces provide a nice detail
when dressing up brake calipers & master cylinders
on Metric Cruisers.
2013 Bleeder Screw Covers (pr) $
19.99
2018 Bleeder Screw Cover (ea) $
10.99
2015 Banjo Bolt Cover (ea)
$
15.99
Fits: Most Cruisers with Banjo
Fittings Requiring a 12mm wrench
2064 Bleeder Screw Cover (ea)
Fits: All Victory Models (except
Vision)
$
10.99
L o o k s G r e a t W i t h . . .
lower fork skins
Something missing but you just can't put your
finger on it? Let us enlighten - You need to add
some Lower Fork Skins! See pg 145
P/N 8687
Bullet Covers
(P/N 1230) Shown
front
caliper covers for VTX1800
Perk up that front end by adding these super easy to
install chrome Caliper Covers.
Fits: All ’03-’08 VTX1800 Models (except Early ‘03 &
‘07-’08 Models or other Models with caliper bleeder
screw between brake line fittings)
1298 Caliper Covers for VTX1800 (pr) $
49.99
148
front caliper covers
for Yamaha Patent Pending
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4
Placed prominently on the front wheel there couldn’t be a better
setting for this eye catching beauty. The bold design evokes the
look of a high performance six piston brake caliper. With multiple
cutouts, keep the look light or install the black back plate & cover
everything up. Installation is a snap with high strength peel-&-
stick adhesive.
Fits: All ’06-’10 Roadliner & Stratoliner Models, all ‘04-‘10 Road
Star 1700 Models (except Warrior), & all '08-'10 Raider Models
8701 Front Caliper Covers (set) $
69.99
caliper cover
This wicked looking Caliper
Cover installs in minutes. No
tools required.
1294 Front Caliper Cover (ea)
Fits: Kawasaki: All Vulcan
900/1500/1600
Suzuki: 800 Volusia/Boulevard
C50/M50
Yamaha: V Star 1100/1300, & Royal
Star Venture
1297 Front Caliper Cover (ea)
Fits: ‘96-’02 VT1100C & All ‘03-’09
VTX1300 Models
$
20.99
$
21.99

ear
caliper cover
for Kawasaki & Suzuki
Styled to imply speed & motion, our Rear Caliper Cover creates a powerful hightech
look. The rich chrome finish adds a bright spot to the rear wheel area & is
much easier to keep clean than the stock finish. Installation is simple & quick
with high strength peel-&-stick adhesive.
Fits: Kawasaki: All ’06-’10 Vulcan 900 Models, all ’03-’08 Vulcan 1600 Models,
all ’04–’10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all ’02–’08 Vulcan
1500, & all '09-'10 Vulcan 1700 Classic
Suzuki: All ’06–’09 M109 Models, all ’08-’09 C109 & ‘09 M90 Models
1283 Rear Caliper Cover (ea) $
39.99
rear brake caliper cover
for VTX1300
Flow chrome over that Rear Brake Caliper Cover &
make it sparkle! Easy installation.
Fits: All ’03-’09 VTX1300 Models
1299
rear caliper cover
Finish off that rear brake with our pure custom
looking Rear Caliper Cover. You won’t believe
the difference!
1299 Rear Brake
Caliper Cover (ea)
Fits: ‘02-’08 Honda
VTX1800 Models
1289 Rear Caliper
Cover (ea)
Fits: ‘06-’09 Suzuki
M109R Models
$
39.99
$
29.99
1288 Rear Brake Caliper Cover (ea) $
39.99
brake component dress-up kit
for Honda & Kawasaki
These Dress-Up Kits for the VTX make artwork out of
parts that are otherwise pretty dull. All kits include a
replacement fluid reservoir cap & a wrap-around reservoir
cover. The kit for the VTX1800C/F also places a streamlined
cover on the master cylinder. All components feature a
dazzling chrome finish.
7821
C H R O M E
rear master cylinder cover
for Yamaha
Class up & clean up your master cylinder & front motor
area! Simply stick on the chrome cover, bolt on the
chrome shroud, & get a clean finished look in minutes.
Fits: All ‘99-’10 Road Star 1600/1700 Models (except
Warrior), & '09 -'10 V Star 950
7825 Rear Master Cylinder Covers (ea) $
31.99
7820 Brake Dress-Up Kit (ea)
Fits: ’02-’08 VTX1800C/F
7821 Brake Dress-Up Kit (ea)
Fits: ’03-’08 VTX1800 Retro/S/T/N, all '09-'10
Fury Models & '10 VT1300 Custom Line
(Sabre, Stateline & Interstate)
7826 Rear Master Cylinder Cover (ea)
Fits: ‘03-’09 VTX1300C/R/S/T
7822 Brake Reservior Cap (cap only)
Fits: Honda: '03-'09 VTX1300, '02-'08 VTX1800
Kawasaki: '02-'08 Mean Streak, '03-'08 1600
Classic & Nomad
$
39.99
$
29.99
$
31.99
$
21.99
7820
W W W . K U R Y A K Y N . C O M
149

marquis
choke knob cover U.S. Patent 5,836,214
Our attractive chrome Choke Knob Cover installs easily without removing or
modifying the stock choke knob.
Fits: Honda: All VTX1300, '04-’09 Shadow 750 Aero/Spirit C2
Kawasaki: Vulcan 800/1500/1600
Yamaha: '99-’07 Road Star 1600/1700 & All Royal Star Venture, V Star 650/1100
2009 Marquis Choke Knob Cover (ea) $
29.99
petcock cover
for VTX1300
Add the finishing touch to your drab
fuel petcock by covering those
unfinished parts with style. The
left side of your tank will now look
high class.
Fits: All '03-’09 VTX1300 Models
7830 Petcock Cover
for VTX1300 (ea)
$
39.99
mega horns
Be heard loud & clear with
our trumpet style horns for
your ride. With new Mega Horn
technology, get that loud air horn style sound in one
little package. Installs swiftly in front of your motor
along your front frame tubes. Ride on & be heard.
7736 Mega Horns with Mount (ea)
Fits: Yamaha: All Road Star, V Star,
& Raider Models
7737 Mega Horns with Mount (ea)
Fits: Honda: All VTX1800/1300
Models
Note: Engine guards may limit installation.
$
139.99
$
139.99
v-shield engine cover
A great way to spiff up the left side of your Vulcan 1500/1600 or VTX1800. Our V-Shield Cover adds a sinister
look to the engine bay of your big, V-Twin Cruiser. Chrome-plated die-cast construction makes this stout
looking piece a worthwhile addition.
7715 V-Shield Cover Kit (ea)
Fits: '02-’05 VTX1800 (without radiator reservoir on left side of tank)
7717 V-Shield Cover Kit (ea)
Fits: Vulcan 1500 or 1600 (with aftermarket air cleaner)
Note: Kawasaki applications relocates OEM horn to left side of engine. Intended only to be used if
OEM air cleaner assembly has been removed & replaced with a Hypercharger or other right-sideonly
aftermarket air cleaner.
$
69.99
$
69.99
horn
cover
Making your
presence known is
a beautiful thing;
but the horn itself
sure isn’t. This
bolt-on chrome
cover ensures your horn is heard, but not seen.
Fits: '98-’10 V Star 650 & '99-’09 V Star 1100 Models
8127 Horn Cover (ea) $
39.99
150
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

zombie tm
medallions
Keep a bunch of little Zombies with you wherever you are. Stick them on your motorcycle, toolbox, car,
computer monitor—anywhere you think their sinister faces will brighten your day. Just peel off the backing &
fasten them onto…whatever! Leave a trail of Zombies & you’ll always find your way home.
3797
1491 Large Zombie (pr)
Requires 2” of flat surface for mounting
1492 Small Zombie (pr)
Requires 1” of flat surface for mounting
Note: Replacements for Küryakyn P/N’s 7411, 7412 7520, 7521, & 8712
3797 Zombie Medallion (ea)
Fits: Universal for peel-&-stick applications - Requires a 4 -1/2" diameter flat surface
Yamaha: All '06-'10 Roadliner & Stratoliner & '08-'10 Raider Left Transmission Cover & Front
Drive Hub Cover & All '07-'10 V Star 1300 & '09-'10 V Star 950 Front Drive Hub Cover Only
Note: See page 15 & 22 for additional styles for universal applications.
$
15.99
$
14.99
$
17.99
3797
Stick 'Em
Anywhere!
speedometer visor
Easily affixes to the speedometer. Besides the sleek appearance,
you’ll really appreciate the reduction in glare if you run a windshield!
N E W f o r 2 0 1 0 . . .
universal
attitude Medallions
Simple, affordable & a great way to define yourself
with a little attitude. See pg 22
P/N 3795
4015 Speedo/Tach Visor (ea)
Fits: Honda: ‘02-’06 VTX1800C, All 250 Rebel,
Shadow 1100 with Round Speedo on handlebars
measuring 3-3/4”
Victory: All '04-'10 Models (Jackpot, Kingpin,
Vegas, Hammer) with digital gauge (except Vision)
Universal: Speedometers & tachometers 3-3/4”
diameter with 7/16” of exposed bezel/sidewall
4016 Speedo/Tach Visor (ea)
Fits: Speedometers & tachometers 3-1/4”
diameter with 1/8” of exposed bezel/sidewall
$
25.99
$
25.99
C H R O M E
driver footpeg
mount covers for VTX1300C
Finish off those unfinished welds on your driver footpeg mounts even if you aren’t a skilled
welder! Our Driver Footpeg Mount Covers work great with stock pegs & also do wonders at
showing off custom peg applications.
Fits: '03-’09 VTX1300C
7011 Driver Footpeg Mount Covers (pr) $
49.99
4016 4015
W W W . K U R Y A K Y N . C O M
151

Engine covers (for honda)
Own a Show-
Stopping Motor at a
Reasonable Price!
Chromes
Both Sides
of Your
Engine
engine case covers For Honda
Amaze everyone with the look of a new show-stopping chrome motor on your VTX1300 & VT 1300
Custom or Fury. See both sides of your motor & even your clutch sparkle with chrome. No more drab
gray areas around the heart of your motor any more.
7703 Fits: All ‘03-’09 VTX1300 Models $
199.99
7731 Fits: All '09-'10 Fury, All '10 VT1300 Custom Line
$
199.99
(Sabre, Stateline, & Interstate)
L o o k s G r e a t W i t h . . .
air cleaners
Add style & function! Search our many
options of air cleaners for one that suits
your need for speed & looks. See pg 191
Perfect Match
with Our Engine
Case Covers!
(above)
Pro-R Hypercharger
engine
cover inserts for Honda
Dress up your plain chrome engine covers with these racy,
speed-lined Engine Cover Inserts. Sold in sets of 3, our
molded ABS chrome-plated inserts stick to the smooth
clutch, timing, & left crankcase covers adding depth & a
machined from billet look. Easily installed without tools.
7707 Engine Cover Inserts (set/3)
Fits: All ‘02-’08 VTX1800 Models
7708 Engine Cover Inserts (set/3)
Fits: All ‘03-’09 VTX1300 Models
& all '09-'10 Fury Models, all
'10 VT1300 Custom Line (Sabre,
Stateline & Interstate)
$
69.99
$
69.99
152
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

Chromes Both
Sides of Your
Engine
engine
case covers
for VTX1800
Complete the creamy, luscious appearance of your
VTX1800 with these ultimate Engine Case Covers! Fit
snugly along the base of the engine below the fins on both
sides. They look like expensive chromed-engine cases but
they bolt on in minutes & cost a heck of a lot less.
Fits: All ‘02-’08 VTX1800 Models
7704 Engine Case Covers $
199.99
clutch housing shroud for VTX1800
We designed this part to finish the job started by our Engine Case Covers. Made of stamped steel with
chrome-plated construction this piece installs quickly & easily with industrial strength adhesive tape
to perfectly cover the exposed upper surface of the clutch housing.
Fits: All ’02-’08 VTX1800 Models
7709 Clutch Housing Shroud (ea) $
59.99
mid cylinder trim
for VTX1800
Fits: ‘02-’08 VTX1800 Models
7730 Mid Cylinder Trim for VTX1800
(Set/4)
$
79.99
Note: Intended for use with our Engine Case
Covers (P/N 7704) only.
Looks great
with our
Engine Case
Covers!
C H R O M E
motor
mount
accents
for VTX1800
Cover the plain black motor mounts while also filling
in some of the dead space around your engine with
these chrome-plated, precision-cut accents.
Fits: All ’02-’08 VTX1800 Models
1546 Motor Mount Accents for $
69.99
VTX1800 (set /4)
Note: Only the two rear motor mount accents will install with
Engine Case Covers (P/N 7704).
7709
W W W . K U R Y A K Y N . C O M
153

engine covers (for ya ma ha)
cylinder base covers
for Road Star
Flow chrome across the left side of your motor & atop your transmission
to get that expensive chromed motor look in minutes! Add our Tappet
Block Covers (P/N 7728) for enhanced sparkle on the right side. You will
be amazed at the difference these make.
Fits: All ‘99-’10 Road Star 1600/1700 & ‘02-’09 Road Star Warrior Models
7729 Cylinder Base Covers (set) $
99.99
Note: Fully dress your motor with additional Yamaha OEM chrome motor covers.
Removes the
Extra Clut ter!
starter cover
for Road Star
Crown the end of your
starter with this stylish
chrome top & reveal a new
clean chrome appearance. Use
the two block-off plates to remove
the rubber hoses next to your starter
& all the clutter between your frame
tubes & the front cylinder jug. Coordinates
with Küryakyn Cylinder Base Covers (P/N 7729).
Fits: All ‘99-’07 Road Star Models (except Warrior)
finned spark
plug covers
for Road Star 1700
Fill the gaping hole around your spark plugs & amaze
your friends with the clean full look of your motor.
Simple installation.
Fits: All ‘04-’07 Road Star 1700 Models (except Warrior)
(For Carbureted Models Only)
7761 Finned Spark Plug Covers (pr) $
49.99
7727 Starter Cover for Road Star (ea) $
59.99
Note: Installation of this accessory or any emissions modifications may be in
violation of local regulations. Please check your local laws.
shift rod linkages
for Road Star
Set the streets ablaze with the fully chrome Flame Shift Rod Linkage. Or if you're not hot for flames check
out the stunning stainless steel shift linkage with sinister Zombie or Widow chromed emblems. With
direct replacement installation, let a little of your dark side out.
Fits: All ’99-’10 Road Star 1600/1700 (except Warrior) & '08-'10 Raider Models
1061 Widow Shift Rod Linkage (ea) $
95.99
1062 Zombie Shift Rod Linkage (ea) ©2008 $
95.99
1076 Flame Shift Rod Linkage (ea) ©2008 $
99.99
1544
regulator cover
for Road Star
1549
Add sparkle to your regulator with these traditional
fin style Regulator Covers! They contain slots to allow
ample air flow to keep your regulator cool & functional.
1544 Regulator Cover (ea)
$
29.99
Fits: All ‘99-’07 Road Star Models
(except Warrior)
1549 Regulator Cover (ea)
Fits: ’99-’03 Road Star 1600
$
29.99
154
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

K Ü R Y A K Y N I Z E D — Y A M A H A E N G I N E
Rendering Shown
A
B
C
Hi-Five Mach 2
Air Cleaner - pg 192
B
flamed tube accents
Customize your Yamaha pushrod tubes or other 2” diameter
tubes. No chintzy plastic stickers here, these chromed metal
flames are the real deal & install in minutes.
Fits: Yamaha: All Road Star/Road Star Warrior/Roadliner/
Stratoliner/Raider
Universal: Applications with 2” diameter tubes
7762 Flamed Tube Accents (pr) $
39.99
Note: Not recommended for use on exhaust pipes.
pushrod top covers
A
for Yamaha
Connect the chrome between your valve covers & push rod
tubes on the right side of your motor & cover that large black void. These little
accents will really class up your ride.
7759 Pushrod Top Covers (pr) Fits: ‘99-’03 Road Star 1600 Models $
39.99
7760 Pushrod Top Covers (pr)
Fits: ‘04-’10 Road Star 1700 Models (except Warrior), ’06-’10
Roadliner/Stratoliner, & ’08-’10 Raider
$
39.99
add
some
sparkle!
C tappet
block covers
for Yamaha
Add some sparkle to the right side of your motor with these stylized
chrome Tappet Block Covers & trim piece. Bolt directly over the
bottom of your pushrod tubes & stand back to admire the chrome
flowing from your pushrod tubes all the way down your bike. Road
Stars can add the Cylinder Base Covers (P/N 7729) to complete the
new chromed base of your motor.
7728 Tappet Block Covers (set)
Fits: All ‘99-’10 Road Star 1600/1700 &
‘02-’09 Road Star Warrior Models
7726 Tappet Block Covers (pr)
Fits: ‘06-’10 Roadliner/Stratoliner, ‘08-’10
Raider, all ‘99-’10 Road Star 1600/1700, &
‘02-’09 Road Star Warrior Models (Includes
1 pair of Tappet Block Bottom Accents
only- no lower trim)
$
89.99
$
69.99
C H R O M E
W W W . K U R Y A K Y N . C O M
155

ea r end
rear shock
top cover for Honda
Chrome shocks with a dull chrome top
mount? Not good. Finish the chrome all
the way to the top with our Rear Shock Top
Cover & notice the difference. With Küryakyn
styled blood grooves, these covers finish the
shock top out right.
Fits: All Honda VTX1800 (except N) & all VTX1300,
Shadow 1100 Sabre/Spirit, Shadow 750 Ace/Aero/Spirit/
Phantom & other Models with shocks matching
dimensions shown
Before
8261 Rear Shock Top Cover for Honda (pr) $
51.99
3/4”
small addition
with a big look!
Af ter
3-1/8”
9002
rear tank trim for VTX1300C
Add some shine & fill the void between the gas tank & your seat with this
stylish chrome accent. Keep the lines of your bike flowing & cover up those
crude welds on the back of your tank with a quick & easy installation.
Fits: ‘03-’09 VTX1300C Models
7824 Rear Tank
Trim for
VTX1300C (ea)
$
39.99
9001
reflector covers
for Honda & Yamaha
Stylize those unsightly front & rear
reflectors on your bike with our louvered
chrome covers. Heightens visibility but also adds a
stylized cover in traditional Küryakyn shiny chrome.
9001 Reflector Covers Small (pr)
Fits: Front: All VTX1800, all 1100 Spirit (front & rear), all 750
Spirit, all Shadow VLX 600, '10 VT1300 Custom Line & other
motorcycles with reflectors that are 3-5/16” by 1-1/4” or smaller
with 1⁄4” of clearance around the reflector
9002 Reflector Covers Large (pr)
Fits: Front: All Yamaha Road Star, V Star 950, 1100, Royal Star &
Royal Star Venture, Raider
Rear: Honda:‘02-’07 VTX1800 (except C) Models & ‘03-’06 1300
Retro/S/T, & other motorcycles with reflectors that are 3-1/2”
by 1-3/8” or smaller with 1⁄4” of clearance around the reflector
$
19.99
$
19.99
156 C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

K Ü R Y A K Y N I Z E D — V T X R E A R E N D
A
B
D
C
(Part located on other side)
Products shown on VTX1300
8260
A
frame trim for VTX
Transform that rough black frame
forging into a sleek, stylish, attention
getter. This two-piece kit attaches with
high-strength, high temp adhesive for quick
& easy installation.
8260 Fits: All VTX1800 (set) $
83.99
8305 Fits: All VTX1300 (set) $
83.99
C
sleek &
Stylish in
minutes!
swingarm cover
for VTX
Your friends are going to
think you went out & bought
a whole custom swingarm
with this show-chrome cover.
It will set you apart & is the
perfect complement to our
Drive Shaft Cover (P/N 8285).
Fits: All ‘03-’09 VTX1300 & ‘02-’08
VTX1800 Models
B
D
drive hub
top cover for VTX
Imagine a great football team with no quarterback. Adding one key player
can create a legendary combination. Announcing Küryakyn’s top draft pick;
the Drive Hub Top Cover for the VTX. Add this new player to your bike & our
gleaming Chrome Drive Shaft Cover (P/N 8285) & this team could be on its
way to the playoffs!
Fits: All Honda VTX1300/1800 Models with Küryakyn Drive Shaft
Cover (P/N 8285)
8688 Drive Hub Top Cover for VTX (ea) $
93.99
drive
shaft cover for VTX
U.S. Patent D549,622
C H R O M E
looks great
with our drive
shaf t cover!
8287 Swingarm Cover for
VTX (ea)
$
103.99
Compare our Drive Shaft Cover to others on the market. This setup sets a
whole new standard. Two-piece, chrome-plated stamped steel construction
covers both the differential & shaft tube giving the appearance of a
completely chromed assembly.
Fits: All ‘03-’09 VTX1300 & ’02-’08 VTX1800 Models
8285 Drive Shaft Cover for VTX (ea) $
139.99
W W W . K U R Y A K Y N . C O M
157

Chrome Your
Rear End!
E
B
C
D
A
F
A boomerang
frame trim for Road Star
Chrome your rear frame supports with smooth elegant beauty the simplest way possible! These
metal covers bolt directly over your bland frame & include all the hardware you will need for a
seamless installation. You’ll get the look of a custom chromed frame for a fraction of the cost!
Fits: All ‘99-’10 Road Star 1600/1700 Models (except Warrior)
8662 Boomerang Frame Trim for Road Star (set) $
149.99
add the
look of
motion!
B
front drive pulley cover
Customize your Road Star & add some class with
the look of motion to your front drive pulley cover.
Installation will take you seconds & you’ll be amazed
at the difference!
Fits: All ‘99-’10 Road Star 1600/1700 Models (except
Warrior)
8960 Front Drive Pulley Cover for Road Star (ea) $
39.99
158 C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

K Ü R Y A K Y N I Z E D — R O A D S T A R R E A R E N D
protects your
belt & looks
good doing it!
phantom
C
covers for Road Star
Add the finishing touches to the tail end of your swingarm & smooth out
those lines. These little beauties cover up the axle, adjustment bolts, & rough
casting in one easy step.
Fits: All Road Star Models (except Warrior)
8229 Phantom Covers for Road Star (pr)
$
69.99
Fits: All ’99-’10 Road Star (except Warrior)
Note: Right side on ‘07-’10 Models requires aftermarket exhaust
with 1” clearance from axle nut.
8665 Phantom Covers for Road Star (pr)
$
79.99
Fits: All ’99-‘10 Road Star (except Warrior) with stock
exhaust or other that covers right rear axle bolt
Note: When checking for appropriate clearance, please remember swingarms move
separate from your exhaust mounts. Compress & extend suspension for proper clearance.
Adjustable
Foot Position
E
lower belt guard accent
D
for Road Star
passenger peg mounts for Road Star
Want to sparkle up that drab stock belt guard? This accent is easily added to
the lower belt guard to protect the OEM belt while covering the black plastic.
WOW! What a difference!
Fits: All ‘99-’10 Road Star 1600/1700 Models (except Warrior)
8663 Lower Belt Guard Accents for Road Star (ea) $
93.99
You asked for them so we made ‘em! Move your passenger footpeg mounts
forward 3-1/2” & down 1-1/4” or forward 1/2” & down 1-1/4” for added
passenger comfort. With custom pipes lower than stock, flip the bracket
down for a full 3-3/4” lower foot position.
Fits: All ‘99-’10 Road Star 1600/1700 Models (except Warrior)
4560 Passenger Peg Mounts for Road Star (pr) $
99.99
Note: Requires Male Mount Pegs - pg 142.
lower swingarm
cover extension
for Road Star
Finish chroming the lower right frame tube
to completely chrome your swingarm. This
addition looks great with custom exhaust
applications that allow the full swingarm to be
seen. Simple installation.
Fits: Road Star with existing Küryakyn
Swingarm Covers (P/N 8262 or 8664)
8661 Lower Swingarm Cover
$
29.99
Extension for Road Star
(except Warrior) (ea)
Note: P/N 8661 is included in Swingarm Covers Set
(P/N 8262).
swingarm
F
covers
for Road Star
Want the appearance of an expensive
chrome swingarm without the hassle of
tearing apart the back end of your bike? Chrome
your whole visible swingarm with our Swingarm
Cover Kit & add that extra shine in minutes for a fraction
of the price.
8262 Swingarm Cover for Road Star (set)
$
169.99
Fits: All ’99-’10 Road Star (except Warrior)
Note: Right side on ‘07-’10 Models requires aftermarket
exhaust with 1” clearance from axle nut.
8664 Swingarm Covers for Road Star (set)
$
169.99
Fits: All ’99-‘10 Road Star (except Warrior) with stock
exhaust or other that covers right rear axle bolt
Note: When checking for appropriate clearance, please remember swingarms move separate
from your exhaust mounts. Compress & extend suspension for proper clearance.
Chrome Your
Entire Visible
Swingarm
in Minutes!
C H R O M E
W W W . K U R Y A K Y N . C O M
159

8203
phantom
covers for V Star
These awesome rear axle/hub covers work
wonders on the back wheels of V Star 1100's &
650's alike. They turn a hodge-podge of fasteners,
frame tubes, axles, hubs etc. into one smoothsculpted
chrome cover. The kit also includes
covers to hide the bolt heads that secure the drive
housing to the swingarm. Combine these with our
Boomerang Frame Covers & you’ll have one seriously hot
lookin’ scooter on your hands!
Fits: ‘98-’10 V Star 650, ‘99-’09 V Star 1100 (‘06-’10 V Star 650
& 1100 right sides require aftermarket exhaust that allows
3/4” clearance from exhaust mount bracket & axle nut)
8203 Phantom Covers for V-Star 650 $
79.99
& V Star 1100 (pr)
Note: When checking for appropriate clearance on ‘06-‘09 Models
please remember swingarms move separate from your exhaust mounts.
Compress & extend the suspension for proper clearance.
8286
shaft drive cover
for V Star U.S. Patent D549,621
Give the rear differential the effect of a
chromed housing at a fraction of the cost. Our
Shaft Drive Cover integrates nicely with the design
of our Phantom Covers for the V Star. Easy
add-on with a two-bolt installation.
Fits: ’99-’09 V Star 1100 & ’98-’10 V Star 650 Models
8286 Shaft Drive Cover for V Star (ea) $
83.99
boomerang frame covers for V Star 650 & 1100
This dazzling chrome accent will really make your bike stand out from the rest. Easily
installed, these show-chromed, die-cast frame covers make artwork out of a part of
your bike that would otherwise fade into the background. The kit for the V Star
1100 includes a pair of upper frame covers that smooth the transition from
the Boomerang Frame Cover to the fender. These really “pop” when
combined with our Phantom Covers!
8236 Fits: All V Star 650 Models (pr) $
103.99
8237 Fits: All V Star 1100 Models (pr) $
169.99
8237
8236
mid-frame covers
for V Star 1100
Turn that drab black frame tube under your seat into a real eye
catcher. It looks so real that you can hardly tell it’s just a cover.
When added to our Boomerang Frame Cover it looks like you’ve
chromed the whole frame! Quick & simple to install.
Fits: All ’99-’09 V Star 1100 Models
8255 Mid-Frame Covers for V Star 1100 (pr) $
69.99
160
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

K Ü R Y A K Y N I Z E D — Y A M A H A R E A R E N D
v
B
A
C
Zombie Attitude
Medallion Shown - pg 15
Full Chrome
Transformation!
B
C
top belt guard for Yamaha Patent Pending
Simple elegance. This fully chromed replacement guard with its turneddown
end & stylish side accents only enhance the original lines of the rear
end. Easy two bolt installation.
Fits: All ’08-‘10 Yamaha Raider Models & '06-'10 Roadliner/Stratoliner
8940 Top Belt Guard (ea) $
79.99
boomerang frame cover
for Yamaha Patent Pending
A renowned Küryakyn parts designer once said,
“Chrome won’t get you home, but you’ll look good
when you get there.” This frame Cover reinforces
these sage words. This natural transition covers
the black frame rails with a flash of chrome that
catches the eye & provides a more flowing
appearance. One of the most aesthetically
pleasing additions you can make to these
already beautiful motorcycles.
Fits: All ’08-‘10 Yamaha Raider Models
& '06-'10 Roadliner/Stratoliner
8943 Boomerang Frame Cover (ea) $
59.99
Covers Left
Side Only
A
swingarm axle
adjuster cover for Raider
Patent Pending
Effortlessly transform the end of your
swingarm! This two-piece creation was not only
8942
designed to conceal, but also gracefully highlight
the trailing edge of your swingarm without being too overbearing. The removable
center allows access for belt adjustments when needed. Select the original or short
cover to suit your style & be amazed. (Sold individually)
Fits: All ‘08-‘10 Yamaha Raider Models - Fits both left & right side of swingarm
(sold individually)
Note: Only P/N 8942 installs on right side with Vance & Hines Exhaust.
8941 Swingarm Axle Adjuster Cover (ea) $
99.99
8942 Short Swingarm Axle Adjuster Cover (ea) $
99.99
Fits Both
Sides of Your
Swingarm!
D o n ' t F o r g e t . . .
license plate bracket
Get rid of that stock mount! Our uniquely styled
License Plate Bracket will have everyone asking
you where you got it. See Pg 163
P/N 9257
8941
W W W . K U R Y A K Y N . C O M
161
C H R O M E

clutch cable adjuster cover
Here is a classy cover to hide the crude, zinc-plated cable adjuster. It’s simple,
two-piece design encapsulates the threaded adjuster. It installs in moments with
easy-to-handle spring clips & can be removed just as quickly should you need to
adjust your cable.
2017 Clutch Cable Adjuster Cover (ea)
$
41.99
Fits: All Kawasaki 800 Vulcan
2060 Clutch Cable Adjuster Cover (ea)
$
31.99
Fits: Honda: ‘88-’02 VLX600, ‘95-’98 VT600C & ACE,
‘96-’01 Magna 750, ‘00-’02 Nighthawk 750, ‘03-’09 VTX1300
Suzuki: ‘99-’02 Marauder
Yamaha: V Star 650
2023 Replacement Spring Clips for P/N 2017 (pr) $
2.99
transmission
cover set for Valkyrie
You’d best keep your shades handy, ’cause once you mount this Transmission
Cover Set the shine from your Valkyrie will be blinding! These covers put the
finishing touch on the otherwise dull looking cast transmission case & nicely
complement existing chrome engine components.
Fits: All Valkyrie Models (except Rune)
7710 Transmission Covers for Valkyrie (pr) $
169.99
7705
intake
runner/spark plug cover
for Valkyrie
These exciting covers place an extra dollop of chrome
on an already deliciously sparkling engine. Once
installed, almost all of the cast surface is replaced
with a beautiful show-chromed finish.
7705 Intake Runner/Spark Plug Cover (pr)
Fits: Valkyrie & Valkyrie Tourer
(except Interstate)
$
83.99
162
ferrule
cover
for V Star
Here’s a little flash
of chrome for V
Star Speedo cables.
Just slip it into place
& tighten the set screw -
it’s that easy!
Fits: V Star 650 Models
2024 Ferrule Cover (ea) $
19.99
Fits
Vulcan
900!
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4
axle caps
for Kawasaki Vulcan
It’s amazing what a difference adding a small
detail like this will do for a front end. In minimal
time; rusted, corroded, or chewed up axle ends &
hardware are replaced with a pristine chrome finish!
Fits: ‘95-’04 Vulcan 1500 & ‘06-’10 Vulcan 900
Models
1203 Axle Caps for Vulcan (pr) $
20.99
riser
bolt covers
Often ignored, but glaringly obvious, your stock
zinc-plated riser bolts peer out from under your top
triple tree. Our chrome Riser Bolt Covers go on in
seconds & rights this wrong.
Fits: Hex head or riser bolt or nut requiring 19mm
wrench for removal
8126 Riser Bolt Covers (pr) $
17.99
radiator side trim
for VTX1800
Instant pizzazz! Add this classy chrome & L.E.D.
trim to the sides of your radiator & watch it come
alive. Sturdy, gleaming chrome inserts attach easily
to dress up a part of the bike the factory tries to
camouflage. An array of L.E.D.’s provide a slick detail
& increase visibility by functioning as additional
running lights & turn signals.
Fits: ’02-’03 VTX1800C & Retro Models
3210 Radiator Side Trim (pr) $
99.99
radiator top
or bottom trim
A great dress-up item for your radiator!
Installs with ease.
3211 Radiator Top or Bottom Trim (ea) $
49.99
Note: Works great on VTX1800 Models.

License Plat es
curved tip-back
license plate frame
Add the Curved Tip-Back License Plate Frame & smooth out
the back of your fender. With 8˚ of angle & a curved frame, this
chrome beauty holds a 4” x 7” plate & bolts directly to your stock
OEM license plate mount.
Fits: Bolts directly to flat stock OEM license plate mount
9198 Curved Tip-Back License Plate Frame (ea) $
69.99
Note: Doesn't fit VT 1300 Stateline or Interstate.
Side View
Works Great
on Short
Bobtail
Fenders Too!
L o o k s G r e a t W i t h . . .
universal turn signals
Minimize your turn signals with smooth,
fully chromed L.E.D.'s. Perfect fit with
License Plate Bracket. See pg 94
sub-fender license
plate bracket
with L.E.D. Curved Frame
Patent Pending
The best single way to improve the looks of
this sweet ride is to fully remove & replace
the OEM billboard with our Curved License
Plate Frame. The compact brackets clean
up your rear end & allow stock, custom, or
Silver Bullet Turn Signals to be installed.
The gleaming chrome frame is
illuminated with cool white L.E.D.’s built
right in. Now that’s more like it!
Fits: All ‘08-‘10 Yamaha Raider Models (Holds
a 4" x 7" Plate)
P/N 1619
C H R O M E
9257 License Plate Bracket with L.E.D. $
189.99
Curved Frame (kit)
Note: Turn signal mounts allow reinstallation of stock turn signals
or others that mount with a 5/16” bolt or stud.
Works Great with Küryakyn Universal Silver
Bullet Lights (pg 93) & Universal Rear Turn
Singals (P/N 5032 - pg 95)
W W W . K U R Y A K Y N . C O M
163

Curved
Laydown
curved laydown
license plate mount
The rear fenders on today’s Cruisers are very impressive. The license plate
bracket & reflectors are a different story. Our streamlined License Plate
Mount holds a 4" x 7” plate & is truly the final touch needed. Such a difference
for so little money.
Fits: ’03-’09 VTX1300 Retro/S/T or ’02-’08 VTX1800 Retro/S/T Models
9171 Curved Laydown License Plate Mount (ea) $
69.99
l.e.d. lighted curved license plate frame
for Aero 750 & Custom Applications
Finish off those clean lines of the Aero with this custom Curved License Plate Mount. Solid
metal parts, L.E.D. lights, & curved design smooths out the lines of the bulky stock mount.
Simple installation uses the stock mounting holes. (Holds a 4" x 7" Plate)
Fits: All ’04-’09 Honda 750 Shadow Aero Models & Universal Custom Applications
3160
9182 L.E.D. Lighted Curved License Plate Mount $
103.99
for Aero 750 (ea)
Note: Universal applications may require drilling holes in your fender.
Smooth Your
Shadow Aero 750
Rear Fender!
eagle License Plate Frames
Show your American pride with these beauties! These universal
plate frames feature a chrome-plated ABS outer frame &
chrome-plated steel backing plates. The backing plate is drilled
for universal mounting or it can be mounted in place of the stock
license plate bracket.
Fits: 4”x 7” Plates
3160 Lone Eagle License Plate Frame (ea) $
49.99
3161 Swept Eagle License Plate Frame (ea) $
49.99
Show
your
American
Spirit
3161
C h e c k O u t . . .
License plate hardware kits
Don't want a full frame but need to improve
the look? These kits can help. See pg 15
164
C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4
P/N 1623

lighted license
plate frame
This chrome die-cast license plate frame incorporates
two high intensity light bulbs that are wired separately.
Wire one each to your brake & tail lamp circuits or
together for an extra bright stop or running light.
Fits: 4” x 7” Plates
9167 Lighted License Plate Frame (ea) $
45.99
Note: Not intended to replace O.E.M. brake or taillight.
ball-milled
license plate frames
The one thing most custom license plate frames
have in common is they’re too small to fit some
of the state’s license plates! This frame is offered in
two sizes to fit 4-3/8” x 8” & 4” x 7” plates. Depending
on which plate you’re working with, some minor
modifications may still be necessary but this will make
many installations much easier. Finished in glistening
chrome with ball-milled accents.
9164 Large License Plate Frame (ea) $
29.99
9163 Small License Plate Frame (ea) $
29.99
license holder
Designed to replace Harley’s standard 3-bolt
license plate bracket, this baby streamlines
your fender by tilting the plate back. Kit includes
rubber wedge so you have an option as to how far
the plate lays down.
Fits: Universal for Custom Applications (Holds a
4" x 7" Plate) License Plate Frame not Included
W o r k s G r e a t W i t h . . .
Run turn brake controllers
Coordinate with this product for full
lighting control options. See pg 97
curved license
plate frame
with Dual Accent Lighting Patent Pending
This “frame-up” leaves no chance for mistaken identity! With
its gentle curved contour & snug, fender-hugging mount, this
license plate frame has a distinctive look all its own. For even
more sizzle, red L.E.D. accent lights operate in run/brake,
or run/turn modes. White L.E.D.’s provide additional plate
illumination at night. A perfect complement to Run-Turn-
Brake Controllers this plate ties right in for all 3 functions.
Designed to fit 4” x 7” plates.
Fits: ’03-’09 VTX1300 Retro/S/T, ’02-’08 VTX1800 Retro/S/T Models &
Universal Lay Down Applications
3166 Curved License
$
124.99
Plate Frame
with Dual Accent
Lighting (ea)
Note: Universal applications requires drilling holes
in fender.
P/N 4710
C H R O M E
Note: May require drilling holes in fender.
9165 Laydown License Plate
Holder (ea)
$
39.99
license frame
& back plate set
Our chrome frame & back plate
will dress up your license plate when
using the stock bracket.
Fits: 4” x 7” Plates
9166 License Frame &
Back Plate (Set)
$
19.99
W W W . K U R Y A K Y N . C O M
165

l.e.d. license plate
bolt lights
Light up your license plate whether it’s in the stock location or custom mounted
with these white L.E.D. bolt lights. You won’t find a cleaner license plate lighting
option with a simpler installation.
9199 L.E.D. License Plate Bolt Lights (pr) $
19.99
Note: 1/4"-20 Mounting Stud.
License Plate Frame
(P/N 9163)
l.e.d. license plate illuminators
with red Accent light
Each License Plate Illuminator has two L.E.D.’s. The white L.E.D. lights up the license plate & the rear-facing
red L.E.D. can function as an auxiliary running light, turn signal, or brake light for added visibility. The 1/4"-20
mounting stud makes it simple to bolt them on, wire them in, & ride on!
9399 L.E.D. License Plate Illuminators
with Red Accent Light (pr)
$
31.99
inspection
plate
This small chrome display
bracket mounts cleanly
in any location dictated by
local or state regulations.
Now you don’t have to
mess up a nice paint job
or chrome surface with
some cheesy government sticker. Universal fitment.
9168 Inspection Plate
3-1/2” x 3-1/2” (ea)
9162 Texas Inspection Plate
2-7/8” x 4” (ea)
$
41.99
$
41.99
Silver Bullets Shown
(Sold Separately - pg 93)
License Plate Frame
(P/N 9163)
Mounts
Behind Plate
license plate helmet
lock with mount
Add this License Plate Helmet Lock & conveniently
lock your helmet to your motorcycle. The simple little
mounting plate easily bolts to the back of almost any
motorcycle & allows the easiest access for locking
your helmet.
4248 License Plate
$
39.99
Helmet Lock (ea)
Note: Will not install with Curved License Plate Frames or
Swept/Lone Eagle License Plate Frames.
license plate
marker light/
turn signal mount
Mount auxiliary marker lights or turn signals to your
license plate. This simple system mounts directly to the
back of your license plate with support backing plate &
two side mount brackets. The side mount brackets have a
3/8” hole & will accept Küryakyn Silver Bullets or L.E.D.
Mini Bullets (pgs 92-93).
4247 License Plate Marker
Light Mount (ea)
$
39.99
Note: Will not install with Curved License Plate Frames or
Swept/Lone Eagle License Plate Frames.
For More Options See Additional
Turn Signal Relocation Mounts (P/N 3155 - pg 21)
166 C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4

curved side mount
license plate holders
In the past if you wanted a cool, custom side-mount license plate you paid
through the nose. Our product brings the price down to reality without
compromising style & function. All frames include a license plate light so
simply choose your plate then get the correct Mounting Clamps. Sized to fit
4” x 7” plates only.
License Holders
9023 Lighted Curved Horizontal Side Mount License Holder (ea) $
119.99
9005 Lighted Curved Vertical Side Mount (ea) $
114.99
9006 Lighted Flat Vertical Side Mount with Brake Light (ea) $
135.99
9007 Lighted Curved Vertical Side Mount with Brake Light (ea) $
155.99
Note: Not intended for use with saddlebags. Please check local laws regarding side mount license plates before ordering.
Note: Mount Clamps required for installation - Sold separately (below).
Mounts Clamps
Required for installation of Küryakyn Side Mount License Holders.
3175
3174 Fits: All Honda VTX1300/1800 (ea) $
31.99
3175 Fits: Yamaha Road Star without swingarm covers (except $
31.99
Warrior) & other motorcycles with 1-1/4” diameter
swingarms (ea)
3176 Fits: Yamaha V Star 1100/650 (ea) $
31.99
3177 Fits: Yamaha Road Star (except Warrior) with Küryakyn
$
31.99
Swingarm Covers (P/N 8262 & 8664)
3182 Fits: All Kawasaki ‘07-’10 Vulcan 900 Models & All ‘04-’10
Vulcan 2000 Models
$
31.99
Note: Mounts are motorcycle specific & designed to work with Küryakyn Side Mount License Plate Holders - Sold
separately (above).
flat side mount license plate with brake light & mount
9023
9005
9154 Lighted Flat Vertical Side Mount with Brake Light
Fits: ‘99-’10 Road Star (except Warrior) & other
motorcycles with 1-1/4” diameter swingarm
Note: Mount (P/N 3177) required for use with Küryakyn
Swingarm Covers (P/N's 8262 & 8664).
$
135.99
9006
9007
C H R O M E
9007
9154
Taillight Can be
Installed on Top
or Bot tom!
Lit/UnLit
W W W . K U R Y A K Y N . C O M
167

ZOMBIE TM
MIRRORS
PG 116
ALSO AVAILABLE:
WINDSCREENS PG 81
TANK PROTECTORS PG 81
GRIPS PG 103
SHIFT LINKAGE PG 154
ZOMBIE TM
LEVERS PG 107
HI-FIVE MACH 2 WITH
ZOMBIE TM MEDALLIONS PG 192
ZOMBIE TM MEDALLIONS
PG 15 & 151
ZOMBIE TM PEGS
PG 123
168 C U S T O M E R C A R E C E N T E R 8 7 7 - 3 7 0 - 3 6 0 4