bid document for the work - IDCO

SPECIAL CONDITIONS FORMING A PART OF THIS CONTRACT.
1. All works are to be executed and measured in conformity with the relevant upto date I.S
Specification, CPHEEO Manual, National building code and Orissa Detailed Standard
Specification, I.R.C and MOS&T Code of practice and specification.
In case of variation in the norms, specifications and methods of execution and
measurement as prescribed in the different codes and incase of doubt regarding means
and scope of specification of any items, the decision of Chairman-cum-Managing Director,
IDCO will be final and binding in this regard. No extra monetary compensation over and
above the accepted agreement rates for various item will be paid to the Contractor on this
Account.
2. Incase of any technical specification not covered in the relevant I.S Specifications,
CPHEEO manuals, National Building Code and Orissa Detailed standard Specification,
I.R.C. and MOS&T Code etc., the specification given by the Consultant/Purchaser/IDCO is
final and binding on the contractor.
3. Every tenderer must examine the detailed specification of Orissa Public Works Department,
relevant IS specifications, CPHEEO manuals and provisions in National Building code and
IRC, MOS&T specification before submitting his tender. The right is reserved with the
Corporation without impairing the contract to make such increase or decrease in the
quantities or items of work mentioned in the schedule of quantities attached to the tender
notice as may by considered necessary to complete the work fully and satisfactorily. Such
increase/decrease shall in no case invalidate the contract or rates. However, increase in
quantity of any particular item upto 25% of the tendered quantity the rate quoted/accepted
will remain in force. It shall be definitely understood that the Corporation does not accept
any responsibility of the correctness or completeness of the quantities shown in the
schedule. The schedule is liable to alternation by omission or addition or deduction and
such omissions, additions and deductions shall in no case invalidate the contract and no
extra monetary compensation will be entertained. At any point of time, the contract can be
terminated if so desired by the Corporation before 30 days of the proposed date of
termination. In the event of such termination, the Contractor shall not be entitled to any
monetary compensation whatsoever.
4. It is the responsibility of the Contractor to ensure production of quality concrete of required
strength and durability which shall be ascertained by the regular field and Laboratory tests
in accordance with IS: 516 and other relevant Indian Standards. All cost involving such test
shall be borne by the Contractor.
73