Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>fischer</strong>-<strong>Zykon</strong>-<strong>Panel</strong> <strong>Anchor</strong> <strong>FZP</strong><br />
ACT Catalogue<br />
Undercut anchor with threaded cone bolt for natural stones<br />
Technical subject to change<br />
flush installation<br />
anchor ‚<strong>FZP</strong>‘<br />
Item<br />
a<br />
installed<br />
anchor<br />
length<br />
drill hole<br />
Ø mm<br />
anchorage<br />
depth<br />
therad<br />
diameter<br />
b<br />
bolt projection<br />
length<br />
Box<br />
quantity<br />
pieces<br />
<strong>FZP</strong> 11x12 M6/13 A4* 95 980 12 11 12 M6 13 250<br />
<strong>FZP</strong> 11x12 M6/18 A4* 96 311 12 11 12 M6 18 250<br />
<strong>FZP</strong> 11x15 M6/10 A4* 78 830 15 11 15 M6 10 250<br />
<strong>FZP</strong> 11x15 M6/18 A4* 60 708 15 11 15 M6 18 250<br />
<strong>FZP</strong> 13x15 M8/10 A4* 79 824 15 13 15 M8 10 250<br />
<strong>FZP</strong> 13x15 M8/15 A4* 60 709 15 13 15 M8 15 250<br />
<strong>FZP</strong> 13x15 M8/23 A4* 45 188 15 13 15 M8 23 250<br />
<strong>FZP</strong> 13x15 M8/28 A4* 60 707 15 13 15 M8 28 250<br />
<strong>FZP</strong> 13x20 M8/10 A4* 16 913 20 13 20 M8 10 250<br />
<strong>FZP</strong> 13x20 M8/23 A4* 95 815 20 13 20 M8 23 250<br />
<strong>FZP</strong> 13x15 M8W/23 A4** 92 736 15 13 15 M8 23 250<br />
<strong>FZP</strong> 13x21 M8W/9 A4** 79 848 21 13 21 M8 9 250<br />
<strong>FZP</strong> 13x21 M8W/17 A4** 60 717 21 13 21 M8 17 250<br />
<strong>FZP</strong> 13x21 M8W/22 A4** 45 189 21 13 21 M8 22 250<br />
* Approval with the German Institute for Building Technology Z-21.9-1275<br />
** Approval with the German Institute for Building Technology Z-21.9-1555<br />
stand-off installation<br />
anchor ‚<strong>FZP</strong>-6kt‘<br />
Item<br />
a<br />
installed<br />
anchor<br />
length<br />
drill hole<br />
Ø mm<br />
V anchorage<br />
depth<br />
therad<br />
diameter<br />
b<br />
bolt projection<br />
length<br />
Box<br />
quantity<br />
pieces<br />
<strong>FZP</strong> 11x21M6/6kt/9 AL* 59 340 21 11 12-16 M6 9 250<br />
<strong>FZP</strong> 11x21M6/6kt/12 AL* 96 323 21 11 12-16 M6 12 250<br />
<strong>FZP</strong> 13x24M8/6kt/14 AL* 96 001 24 13 15-19 M8 14 250<br />
<strong>FZP</strong> 13x26M8W/6kt/17 AL** 90 971 26 13 15-21 M8 17 250<br />
* Approval with the German Institute for Building Technology Z-21.9-1275<br />
** Approval with the German Institute for Building Technology Z-21.9-1555<br />
Drill bit<br />
Type<br />
item<br />
Diamond coated drill bit with water<br />
cooling<br />
using BSN 100 using other <strong>FZP</strong>drilling<br />
machines for<br />
machine for<br />
<strong>FZP</strong> ...<br />
<strong>FZP</strong> ...<br />
box<br />
quantity<br />
pieces<br />
<strong>FZP</strong>B 9 60 713 - <strong>FZP</strong> M6 1<br />
<strong>FZP</strong>B 11 60 710 <strong>FZP</strong> M6 <strong>FZP</strong> M8 1<br />
<strong>FZP</strong>B 13 60 711 <strong>FZP</strong> M8 - 1<br />
Delivery only in complete box-quantities.<br />
price<br />
1 pc.<br />
price<br />
1 pc.<br />
price<br />
1 pc.<br />
b<br />
a<br />
b<br />
a<br />
Prices: per piece net plus valid VAT (for domestic trade)<br />
Terms of payment: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery: for Germany: only for anchors and drill bits net EUR 500 and up no delivery charge; (Normal delivery)<br />
deliveries abroad : ex works Waldachtal<br />
For drilling the holes special drilling machines are neccessary.<br />
On request you receive documents and prices for drill-machines, testing- and measuring instruments, anchor setting tools,<br />
subframe systems, as well as other undercut anchors for Fibercement, HPL, Ceramic and Glass<br />
On request you receive prices for anchor setting machines and tools<br />
National regulations are always decisive and must be observed.<br />
All based under our "General terms".
<strong>fischer</strong>-<strong>Zykon</strong>-<strong>Panel</strong> anchor <strong>FZP</strong>-G<br />
ACT Catalogue<br />
Undercut anchor for glass<br />
Technical subject to change<br />
a<br />
b<br />
Undercut anchor<br />
‚<strong>FZP</strong>-G‘ for<br />
toughened glass<br />
Item<br />
installed<br />
anchorage<br />
depth<br />
drillhole depth<br />
Ø mm<br />
Glass<br />
combination<br />
(mm)<br />
thread<br />
diameter<br />
bolt projection<br />
length<br />
box<br />
quantity<br />
pieces<br />
<strong>FZP</strong> 15x6 M8/11G 30 363 6 15 ≥ 10 M8 11,5 250<br />
<strong>FZP</strong> 15x7 M8/10G 30 365 7 15 ≥ 12 M8 10,5 250<br />
<strong>FZP</strong> 15x6 M8/25G 30 364 6 15 ≥ 10 M8 25 250<br />
<strong>FZP</strong> 15x7 M8/24G 30 366 7 15 ≥ 12 M8 24 250<br />
price<br />
1 pc.<br />
b<br />
a 6,5 6,5<br />
Undercut anchor<br />
‚<strong>FZP</strong>-G‘ for<br />
laminated safety glass **<br />
<strong>FZP</strong> 15x15,5 M8/16G 59 289 15,5 15 10/8* M8 16 250<br />
<strong>FZP</strong> 15x17,5 M8/14G 30 341 17,5 15 10/10* M8 14 250<br />
All <strong>FZP</strong>-G regular available in grey color similar to RAL7040<br />
On request available in black color. Minimum quantity order is 1000 pcs., extra charge of 15%<br />
* thickness of rear glass panel can’t be changed, minimum thickness of front panel is 10mm<br />
** required accessories look at handbook<br />
b<br />
a<br />
drill bit Item for drill depth<br />
mm<br />
for glass thickness<br />
mm<br />
box<br />
quantity<br />
pieces<br />
<strong>FZP</strong>B 13 G6 19 265 6 ≥ 10 1<br />
<strong>FZP</strong>B 13 G7 19 266 7 ≥ 12 1<br />
price<br />
1 pc.<br />
anchor setting<br />
equipments<br />
quantity<br />
pieces<br />
ASV 80G (table 1,0 x0,8m) price 1<br />
rent ** week / month 1<br />
ASV 350 GV (1,3 x 3,5m) price 1<br />
rent ** week / month 1<br />
** exclusive Insurance and Installation / Training<br />
price<br />
1 pc.<br />
Drilling equipment<br />
quantity<br />
pieces<br />
GNS 800G (semi automatic) price 1<br />
rent ** week / month 1<br />
** exclusive Insurance and Installation/ Training<br />
price<br />
1 pc.<br />
Delivery only in complete box-quantities.<br />
Prices: per piece net plus valid VAT (for domestic trade). Exclusive installation, training and postprocessing (rental).<br />
Terms of payment: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery: for Germany: only for anchors and drill bits net EUR 500 and up no delivery charge, (normal delivery)<br />
machines: ex works; deliveries abroad : ex works Waldachtal<br />
On request you receive documents and prices for testing- and measuring instruments, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibercement, HPL and ceramics.<br />
National regulations are always decisive and must be observed.<br />
All based under our "General terms"
<strong>fischer</strong>-<strong>Zykon</strong>-<strong>Panel</strong> <strong>Anchor</strong> <strong>FZP</strong><br />
ACT Catalogue<br />
Undercut anchor for natural stones and ceramics<br />
For special applications<br />
Technical subject to change<br />
a<br />
b<br />
item<br />
installed<br />
anchor<br />
lenght<br />
drill hole<br />
Ø mm<br />
anchorage<br />
depth<br />
Thread<br />
diameter<br />
bolt projection<br />
length<br />
box<br />
quantity<br />
pieces<br />
Price<br />
1 pc.<br />
internal thread anchor<br />
‚<strong>FZP</strong>-I‘<br />
<strong>FZP</strong> 13x12 M6 I** 18 328 12 13 12 M6* - 250<br />
e.g. for washstands, kitchen working plates, stairs, baseboards<br />
* internal thread M6<br />
** only for interior use<br />
a<br />
b<br />
a<br />
cast-in anchor<br />
‚<strong>FZP</strong>-E‘<br />
<strong>FZP</strong> 11x12 M6/ E A4 91 003 12 11 12 - 62 250<br />
e.g. for natural stone panels in precast concrete units<br />
b<br />
clevis type anchor<br />
‚<strong>FZP</strong>-ES‘<br />
<strong>FZP</strong> 11x21 M6/ES/4 AL*** 96 324 21 11 12-16 (M6) 4,5 250<br />
<strong>FZP</strong> 13x24 M8/ES/4 AL*** 96 325 24 13 15-19 (M8) 4,5 250<br />
e.g. for claddings fixed by keyhole principle<br />
*** Approval with the German Institute for Building Technology Z-21.9-1275<br />
a<br />
Undercutanchor for ceramic panels<br />
‚<strong>FZP</strong>-K‘<br />
<strong>FZP</strong> 11x 6 M6 K/12 A4 60 705 12,5 11 6 M6 12,5 250<br />
<strong>FZP</strong> 11x 7 M6 K/11 A4 60 706 13,5 11 7 M6 11,5 250<br />
<strong>FZP</strong> 11x 10 M6 K/13 A4 96 015 16,5 11 10 M6 13,5 500<br />
e.g. for thin ceramic, terracotta or porcelain tiles for thickness 10 mm up<br />
b<br />
a<br />
Drill bit<br />
Type<br />
item<br />
Diamond coated drill bit with water<br />
cooling<br />
using BSN 100 using other <strong>FZP</strong>drilling<br />
machines for<br />
machine for<br />
<strong>FZP</strong> ...<br />
<strong>FZP</strong> ...<br />
quantity<br />
pieces<br />
<strong>FZP</strong>B 9 60 713 - <strong>FZP</strong> M6 1<br />
<strong>FZP</strong>B 11 60 710 <strong>FZP</strong> M6 <strong>FZP</strong> M8 1<br />
<strong>FZP</strong>B 13 60 711 <strong>FZP</strong> M8 - 1<br />
price<br />
1 pc.<br />
Delivery only in complete box-quantities.<br />
Prices: per piece net plus valid VAT (for domestic trade)<br />
Terms of payment: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery: Germany: only for anchors and drill bits net EUR 500 and up no delivery charge, (normal delivery)<br />
deliveries abroad : ex works Waldachtal<br />
For drilling the holes special drilling machines are neccessary.<br />
On request you receive documents and prices for drill-machines, testing- and measuring instruments, anchor setting tools,<br />
subframe systems, as well as other undercut anchors for natural stone, Fibercement, HPL and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our "General terms"
<strong>fischer</strong>-<strong>Zykon</strong>-<strong>Panel</strong> anchor <strong>FZP</strong>-N<br />
ACT Catalogue<br />
Undercut rivet anchor for panels made from fiber cement and HPL<br />
Technical subject to change<br />
Item<br />
drill<br />
hole<br />
Y **<br />
usable anchor<br />
box<br />
quantity<br />
under-<br />
Undercut rivet anchor<br />
Ø cut length<br />
‚<strong>FZP</strong>-N‘<br />
mm Ø mm mm<br />
pieces<br />
<strong>FZP</strong> 9x6/N A4 * 61 211 9 11 6,00 500<br />
<strong>FZP</strong> 9x7/N A4 * 61 212 9 11 7,00 500<br />
<strong>FZP</strong> 9x8/N A4 * 61 213 9 11 8,00 500<br />
<strong>FZP</strong> 9x9/N A4 * 61 214 9 11 9,00 500<br />
<strong>FZP</strong> 9x9,5/N A4 * 61 215 9 11 9,50 500<br />
<strong>FZP</strong> 9x10,5/N A4 * 61 216 9 11 10,50 500<br />
<strong>FZP</strong> 9x11,5/N A4 * 61 217 9 11 11,50 500<br />
<strong>FZP</strong> 9x12,5/N A4 * 61 218 9 11 12,50 500<br />
* Approval with the German Institute for Building Technology Z-21.9-1543<br />
** Usable anchor length Y is thickness of attachable part, e.g. bracket + anchorage depth.<br />
price<br />
1 pc.<br />
Y<br />
box<br />
quantity<br />
pieces<br />
drill bit Item drill bit<br />
Ø mm<br />
<strong>FZP</strong>B 9/N 61 092 9 2<br />
price<br />
1 pc.<br />
Accu-Rivetting tool<br />
Item<br />
box<br />
quantity<br />
pieces<br />
NSG 61 210 price 1<br />
rent*** week / month 1<br />
price<br />
1 pc.<br />
mobile<br />
drilling equipment<br />
quantity<br />
pieces<br />
BFZ 100 price 1<br />
rent*** week / month 1<br />
price<br />
1 pc.<br />
factory located<br />
drilling equipment<br />
quantity<br />
pieces<br />
SBF 500 price 1<br />
rent*** week / month 1<br />
price<br />
1 pc.<br />
Delivery only in complete box-quantities.<br />
Prices: per piece net plus valid VAT (for domestic trade). Machines exclusive installation, training and postprocessing (rental).<br />
Terms of payment: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed. Rent: payable without<br />
deduction immediately after receipt of invoice.<br />
Terms of delivery: for Germany: only for anchors and drill bits net EUR 500 and up no delivery charge (normal delivery),<br />
machines: ex works; deliveries abroad : ex works Waldachtal<br />
*** A rent of an equipment will be controlled by a rental contract. Costs for machine insurance exclusive.<br />
On request you receive documents and prices for testing- and measuring instruments, subframe systems, as well as other<br />
undercut anchors for natural stone, ceramic and glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our "General terms"
<strong>fischer</strong> subframe systems<br />
ACT Catalogue<br />
SystemOne- Bracket solution<br />
Technical subject to change<br />
Profiles<br />
H t Type box Item-No.<br />
quantity<br />
(mm) (mm)<br />
50<br />
25 2 VP 25/2 1 18 441<br />
30 2 VP 30/2 1 77 545<br />
40 2 VP 40/2 1 77 546<br />
vertical profiles 50 2 VP 50/2 1 48 895<br />
standard length 6 m<br />
H t<br />
80 2 VP 80/2 1 48 896<br />
100 2 VP 100/2 1 48 897<br />
60 120 3 VP 120/3 1 48 898<br />
150 3 VP 150/3 1 107 427<br />
180 3 VP 180/3* 1 102 646<br />
Price<br />
per meter<br />
150<br />
60 2 T 60/1 1 77 692<br />
horizontal profile 74 34 HP-BS 1 48 899<br />
standard length 6 m<br />
wall holders<br />
H c Type box Item-No.<br />
quantity<br />
(mm) (mm)<br />
c 180 30 FPH 30 40 18 442<br />
180 54 FPH 54 40 18 444<br />
fix point holder 180 68 FPH 68 30 48 900<br />
H<br />
180 93 FPH 93 20 48 901<br />
180 133 FPH 133 20 30 367<br />
c 60 30 SPH 30 100 18 443<br />
60 54 SPH 54 100 18 445<br />
sliding point holder 60 68 SPH 68 90 48 902<br />
H<br />
60 93 SPH 93 75 48 903<br />
60 133 SPH 133 50 30 368<br />
Connecting elements<br />
B <strong>FZP</strong> Type box Item-No.<br />
quantity<br />
(mm)<br />
B<br />
50 M 6 BR 50-M6 250 48 904<br />
brackets Ø 6/8 50 M 8 BR 50-M8 250 49 238<br />
90 M 8 BR 90-M8 125 78 585<br />
140 M 8 BR 140-M8 100 78 587<br />
Price per<br />
piece<br />
Price per<br />
piece<br />
screw for adjustable DIN 933, A2 ES-BS 200 102 655<br />
brackets M6x16 SW 10<br />
horizontal profile connection 30x30x2 mm PSV-BS 50 48 907<br />
L= 200 mm<br />
* on request<br />
Prices : per piece net plus valid VAT (for domestic trade)<br />
Terms of payment : for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: ex works Tumlingen<br />
Profiles can be cut also according to your requirements. Each saw will be charged with 1,50 € plus cuttings.<br />
With reference to your specific project we draw up a low-priced offer on demand<br />
All based under our „General Terms“ (see enclosures)
<strong>fischer</strong> subframe systems<br />
ACT Catalogue<br />
SystemOne- Bracket solution light<br />
Technical subject to change<br />
Profiles<br />
H t Type box Item-No.<br />
(mm) (mm)<br />
quantity<br />
50<br />
25 2 VP 25/2 1 18 441<br />
30 2 VP 30/2 1 77 545<br />
40 2 VP 40/2 1 77 546<br />
vertical profiles 50 2 VP 50/2 1 48 895<br />
standard length 6 m<br />
H t<br />
80 2 VP 80/2 1 48 896<br />
100 2 VP 100/2 1 48 897<br />
60 120 3 VP 120/3 1 48 898<br />
150 3 VP 150/3 1 107 427<br />
180 3 VP 180/3* 1 102 646<br />
Price per<br />
meter<br />
150<br />
60 2 T 60 1 77 692<br />
horizontal profile HP-BSL 1 18 438<br />
standard length 6 m<br />
wall holders<br />
H c Type box Item-No.<br />
(mm) (mm)<br />
quantity<br />
c 180 30 FPH 30 40 18 442<br />
180 54 FPH 54 40 18 444<br />
fix point holder 180 68 FPH 68 30 48 900<br />
H<br />
180 93 FPH 93 20 48 901<br />
180 133 FPH 133 20 30 367<br />
c 60 30 SPH 30 100 18 443<br />
60 54 SPH 54 100 18 445<br />
sliding point holder 60 68 SPH 68 90 48 902<br />
H<br />
60 93 SPH 93 75 48 903<br />
60 133 SPH 133 50 30 368<br />
B<br />
Type box Item-No.<br />
Connecting elements<br />
(mm) <strong>FZP</strong><br />
quantity<br />
B<br />
40 M 6 BRL 40-M6 250 18 439<br />
40 M 8 BRL 40-M8 250 18 448<br />
Ø 6/8/9<br />
bracket 90 M 8 BRL 90-M8 200 18 447<br />
40 <strong>FZP</strong>-N BRL 40-FZN 250 18 440<br />
Price per<br />
piece<br />
Price per<br />
piece<br />
screw for adjustable DIN 933, A2 ES-BSL 200 102 656<br />
brackets M6x14 SW 10<br />
horizontal profile connection 35x10 mm PSV-BSL 20 18 446<br />
L= 200 mm<br />
* on request<br />
Prices : per piece net plus valid VAT (for domestic trade)<br />
Terms of payment : for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: ex works Tumlingen<br />
Profiles can be cut also according to your requirements. Each saw will be charged with 1,50 € plus cuttings.<br />
With reference to your specific project we draw up a low-priced offer on demand<br />
All based under our „General Terms“ (see enclosures)
<strong>fischer</strong> subframe systems<br />
ACT Catalogue<br />
SystemOne- Connecting elements and accessories<br />
Technical subject to change<br />
Connecting elements Type Box<br />
quantity<br />
Item-No.<br />
Price<br />
1 pc. resp.<br />
H= 100 pcs.<br />
profile guidance GLB 200 48 906<br />
Fixit FIX 250 48 905<br />
cover plate HP-Clip 300 100 123<br />
Cold Bridge Stopp CBS 250 107 358<br />
stripe holder SH-BS 20 79 169<br />
rivet A2/A2 Ø 4,8x11 Standard 1000 58 653<br />
Ø 4,8x14,1 1000 58 650<br />
Accessories<br />
D/d SW height DIN<br />
Box<br />
quantity<br />
Item-No.<br />
washer M6-A2 12/6,4 - 1,6 125 1000 79 167<br />
washer M8-A2 16/8,4 - 1,6 125 1000 79 184<br />
nut M6-A2 10 5,2 934 250 49 918<br />
nut M8-A2 13 6,8 934 250 49 919<br />
self-locking nut M6-A2 10 8,0 985 250 49 916<br />
self-locking nut M8-A2 13 9,5 985 250 49 917<br />
bit FPB T 40 (Torx) 25mm Bit with hexagon bolt 1/4“ 3126 10 67 702<br />
Loctite 2701, 10 ml chemical screw locking for stainless steel 1 107 456<br />
Loctite 2701, 50 ml chemical screw locking for stainless steel 1 104 387<br />
Lubricating grease 100g tube, multipurpose grease 1 102 717<br />
socket wrench with T-handle Wrench size10 for adjusment screws M6 1 107 459<br />
SDS driller Ø10 160/100 SDS-Plus hammer drill with 3 cutting 1 11 888<br />
Bit SW 8, Bosch with fasten clip for stainless steel FABSA types 1 103 734<br />
rivet setting tool Type NSG Accu-Rivetting Tool in metal box 1 61 210<br />
assembling jig HPM 100 BS for SystemOne Bracket solution 1 107 485<br />
assembling jig HPM 50 BS for SystemOne Bracket solution 1 107 486<br />
assembling jig HPM 100 BSL for SystemOne Bracket solution light 1 107 487<br />
assembling jig HPM 50 BSL for SystemOne Bracket solution light 1 107 488<br />
Price<br />
1 pc. resp.<br />
H= 100 pcs.<br />
Frame fixings and chemical fixings or self-drilling screws have to be selected according to the<br />
structural design, to the character and constitution of the walling material and the necessary loads.<br />
See main catalogue <strong>fischer</strong> fixing systems.<br />
Prices : per piece resp. 100 pieces net plus valid VAT (for domestic trade)<br />
Terms of payment : for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: Germany: net EUR 500 and up no delivery charge; (normal delivery); deliveries abroad: ex works Waldachtal.<br />
All based under our „General Terms“.
<strong>fischer</strong> subframe systems<br />
ACT Catalogue<br />
SystemOne Star-Solution<br />
Complete Sets with advantage in price<br />
Technical subject to change<br />
StarSolution Set 1<br />
1 set consists of:<br />
set Item-No.<br />
30 297<br />
4-Point-Solution<br />
Price<br />
per set<br />
1 St. Star 43, 4-point holder<br />
2 St. 4-point holder right, 58<br />
2 St. 4-point holder left, 58<br />
1 St. round nut Ø30x11<br />
1 St. screw M12x55-A2, DIN 912*<br />
2 St. setscrews M8x30-A4, DIN 913<br />
2 St. nuts M8-A2, DIN 934<br />
4 St. fixing sleeves D12x40 M8 I<br />
4 St. screws M8x10-A2, DIN 933**<br />
1 St. washer M12-A2, DIN 125<br />
3 St. washer M8-A2, DIN 9021<br />
± 9°<br />
M8<br />
65<br />
± 9°<br />
130<br />
StarSolution Set 2<br />
1 set consists of:<br />
set Item-No.<br />
30 298<br />
2-Point-Solution<br />
Price<br />
per set<br />
1 St. Star 43, 2-point holder<br />
2 St. 2-point holder, 58<br />
1 St. round nut Ø30x11<br />
1 St. screw M12x55-A2, DIN 912*<br />
2 St. setscrews M8x30-A4, DIN 913<br />
2 St. nuts M8-A2, DIN 934<br />
2 St. fixing sleeves D12x40 M8 I<br />
2 St. screws M8x10-A2, DIN 933**<br />
2 St. washer M8-A2, DIN 9021<br />
65 65<br />
M8<br />
± 9°<br />
~ ± 9mm<br />
* with screw M12x80-A2, DIN 6912, if installation is done from frontside. In that case instead<br />
of round nut a round washer Ø30 is delivered.<br />
65<br />
** on request with screwhead DIN 912<br />
Holder are available in anodized colors: gold-silver-black<br />
Delivery time on request<br />
50<br />
Prices : per set net plus valid VAT (for domestic trade).<br />
Terms of payment : for Germany 14 days 2 % discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: net Euro 500 and up no delivery charge; (normal delivery); deliveries abroad: ex works Waldachtal<br />
For drilling the holes special drilling machines are necessary.<br />
On request you receive documents and prices for drill-machines, anchor setting tools, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibercement, HPL, ceramics and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our „General Terms“.
<strong>fischer</strong>-SystemOne StarSolution<br />
ACT Catalogue<br />
Single parts<br />
Technical subject to change<br />
StarSolution<br />
Item-No. material dimension<br />
mm<br />
specification<br />
Box<br />
quantity<br />
Price<br />
per piece<br />
Star 43 4-point holder 100 109 AL 80x80x43 1<br />
Star 43 2-point holder 100 113 AL 80x80x43 1<br />
4-point holder right, 58 100 106 AL 27x95 1<br />
4-point holder left, 58 100 104 AL 27x95 1<br />
2-point holder, 58 100 107 AL 20x69 1<br />
fixing sleeve D12x40 100 108 A2 Ø12x40 M8* 4,61 1<br />
round nut 100 114 AL Ø30x11 M12* 1<br />
round washer 104 686 AL Ø30x7 I-Ø12,5 1<br />
cover plate 102 966 Nylon Ø45x21 1<br />
* internal thread<br />
only available in RAL colors anodized<br />
connecting elements<br />
Item-No.<br />
Material<br />
wrench<br />
size<br />
DIN<br />
DIN-EN<br />
Box<br />
quantity<br />
screw M12 x 55 100 855 A2 8** 912 4762 100<br />
screw M12 x 80 104 684 A2 8** 6912 7984 100<br />
screw M8 x 10 102 885 A2 13 933 24 017 100<br />
screw M8 x 10 102 901 A2 6** 912 4762 100<br />
set screw M8 x 30 100 387 A4 913 -<br />
nut M8 49 919 A2 13 934 24 032 250<br />
washer M12 102 881 A2 125 - 100<br />
washer M8 102 882 A2 9021 - 100<br />
Loctite 2701, 10 ml 107 456 screw locking for stainless steel 1<br />
Loctite 2701, 50 ml 104 387 screw locking for stainless steel 1<br />
** internal hexagon<br />
Price 1pc. resp.<br />
H= 100 pcs.<br />
Prices : per piece net plus valid VAT (for domestic trade).<br />
Terms of payment : for Germany 14 days 2 % discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: Germany: net EUR 500 and up no delivery charge (normal delivery); deliveries abroad: ex works Waldachtal.<br />
On request you receive documents and prices for testing equipment, subframe systems, drill-machines, anchor setting tools as<br />
well as other undercut anchors for natural stone, Fibercement, HPL, ceramics and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our „General Terms“.
<strong>fischer</strong> reveal angle LW<br />
ACT Catalogue<br />
Complete Sets with advantage in price<br />
reveal angle LW 50 90°<br />
Technical subject to change<br />
Set LW 50 M8 W<br />
1 Set (VE=125) consists of:<br />
1 pc. reveal angle 90° LW 50-M8 (Alu)<br />
2 pcs. spike washers M8-A2<br />
2 pcs. nuts M8-A2, DIN 934<br />
Set<br />
Item-No<br />
91 967<br />
+<br />
↓<br />
Price<br />
1Set<br />
2 St. <strong>FZP</strong> 13x15 M8W/23 A4 92 736<br />
or 2 St. <strong>FZP</strong> 13x21 M8W/22 A4 * 45 189<br />
+ per VE 1 pc. Loctite 10 ml for nut retention<br />
e.g. for sandstone, limestone with thickness > 30mm, *> 35 mm<br />
Set LW 50 M8<br />
1 Set (VE=125) consists of:<br />
Set<br />
Item-No<br />
79 148<br />
Price<br />
1Set<br />
Set LW 50 M6<br />
1 Set (VE=125) consists of:<br />
Set<br />
Item-No<br />
78 995<br />
Price<br />
1Set<br />
1 pc. reveal angle 90° LW 50-M8 (Alu)<br />
2 pc. spike washers M8-A2<br />
2 pcs. stop nuts M8-A2, DIN 985***<br />
+<br />
↓<br />
1 pc. reveal angle 90° LW 50-M6 (Alu)<br />
2 pcs. spike washers M6-A2<br />
2 pcs. stop nuts M6-A2, DIN 985***<br />
with 2 St. <strong>FZP</strong> 13x15 M8/23 A4 45 188 with 2 St. <strong>FZP</strong> 11x12 M6/18 A4 96 311<br />
or 2 St. <strong>FZP</strong> 13x20 M8/23 A4 * 95 815 or 2 St. <strong>FZP</strong> 11x15 M6/18 A4 ** 60 708<br />
e.g. for granite, artificial stone, Terracotta.<br />
e.g. for granite, artificial stone, Terracotta with thickness ≥ 20 mm<br />
Minimum thickness of panel: 25 mm<br />
* minimum thickness of panel is 35 mm ** minimum thickness of panel is 25 mm<br />
*** on request with nut DIN 934 and Loctite for nut retention,<br />
supplement 0,10 €/Set<br />
80 80<br />
50 50<br />
8,5<br />
+<br />
↓<br />
Oblong hole<br />
dimensions<br />
B<br />
(mm)<br />
L<br />
(mm)<br />
LW 50 M6 9 15<br />
LW 50 M8 11 17<br />
50 B<br />
Delivery only in full box-quantities.<br />
(VE 125 Sets)<br />
L<br />
Order note: Apart from the set Item-No. please add the Item-No. of the according undercut anchor.<br />
e.g.: set Item-No: 79 148 and in addition Item-No. of undercut anchor: 95 815<br />
Prices : per set net plus valid VAT (for domestic trade).<br />
Terms of payment : for Germany 14 days 2 % discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: for Germany: net 500 Euro and up no delivery charge, (normal delivery);<br />
deliveries abroad: ex works Waldachtal<br />
For drilling the holes special drilling machines are necessary.<br />
On request you receive documents and prices for drill-machines, anchor setting tools, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibrecement, HPL and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our „General Terms“.
<strong>fischer</strong> reveal angle LW flex<br />
ACT Catalogue<br />
complete sets with advantage in price<br />
reveal angle LW flex 82° - 103°<br />
U N A S S E M B L E D<br />
Technical subject to change<br />
Set LW flex M8 W - unassembled<br />
1 set (VE=125) consists of:<br />
Set<br />
Item-No<br />
91 966<br />
Price<br />
1Set<br />
1 pc. reveal angle LW flex M8 (Alu)<br />
2 pcs. roll pin A2<br />
1 pcs. drill Ø 5,0 mm<br />
2 pcs. spike washers M8-A2<br />
2 pcs. nuts M8-A2, DIN 934<br />
+<br />
↓<br />
with 2 pc. <strong>FZP</strong> 13x15 M8W/23 A4 92 736<br />
or 2 pc. <strong>FZP</strong> 13x21 M8W/22 A4* 45 189<br />
+ per VE 1 pc. Loctite 10 ml for nut retention<br />
e.g. for sand stone, limestone with thickness >30mm, *> 35 mm<br />
Set LW flex M8 - unassembled<br />
1 set (VE=125) consists of:<br />
Set<br />
Item-No<br />
79 150<br />
Price<br />
1Set<br />
Set LW flex M6 - unassembled<br />
1 set (VE=125) consists of:<br />
Set<br />
Item-No<br />
79 149<br />
Price<br />
1Set<br />
1 pc. reveal angle LW flex M8 (Alu)<br />
2 pcs. roll pins A2<br />
1 pc. drill Ø 5,0 mm<br />
2 pcs. spike washers M8-A2<br />
2 pcs. locking nuts M8-A2, DIN 985 ***<br />
+<br />
↓<br />
1 pc. reveal angle LW flex M8 (Alu)<br />
2 pcs. roll pins A2<br />
1 pc. drill Ø 5,0 mm<br />
2 pcs. spike washers M8-A2<br />
2 pcs. locking nuts M8-A2, DIN 985 ***<br />
with 2 pc. <strong>FZP</strong> 13x15 M8/23 A4 45 188 with 2 pc. <strong>FZP</strong> 11x12 M6/18 A4 96 311<br />
or 2 pc. <strong>FZP</strong> 13x20 M8/23 A4 * 95 815 or 2 pc. <strong>FZP</strong> 11x15 M6/18 A4 ** 60 708<br />
e.g. for granite, artificial stone, Terracotta.<br />
e.g. for granite, artificial stone, Terracotta with thickness ≥ 20 mm<br />
Minimum thickness of panel: 25 mm<br />
* minimum thickness of panel is 35 mm ** minimum thickness of panel is 25 mm<br />
*** on request with DIN 934 and Loctite for nut retention,<br />
80<br />
85<br />
Preassembled angles on request.<br />
50±2 50±2<br />
8,5<br />
+<br />
↓<br />
Oblong hole<br />
dimensions<br />
B<br />
(mm)<br />
L<br />
(mm)<br />
LW flex M6 9 15<br />
LW flex M8 11 17<br />
50<br />
B<br />
Delivery only in full box-quantities.<br />
(VE 125 Sets)<br />
L<br />
Order note: Apart from the set Item-No. please add the Item-No. of the according undercut anchor.<br />
e.g.: set Item-No: 79 150 and in addition Item-No. of undercut anchor: 95 815<br />
Prices : per set net plus valid VAT (for domestic trade).<br />
Terms of payment : Germany: 14 days 2 % discount, 30 days net; outside Germany: as agreed.<br />
Terms of delivery: Germany: net 500 Euro and up no delivery charge, (normal delivery); deliveries abroad: ex works Waldachtal<br />
For drilling the holes special drilling machines are necessary.<br />
On request you receive documents and prices for drill-machines, anchor setting tools, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibrecement, HPL and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our „General Terms“.
<strong>fischer</strong> reveal angle LW<br />
ACT Catalogue<br />
single parts<br />
Technical subject to change<br />
reveal angle ‚LW‘<br />
Item-No. angle dimensions<br />
mm<br />
Large hole<br />
mm<br />
Box<br />
quant<br />
LW 50-M6 18 461 90° 80x80x50 9x15 250<br />
LW 50-M8 18 453 90° 80x80x50 11x17 250<br />
LW flex-M6 unassembled* 102 641 82°-103° 85x80x50 9x15 125<br />
LW flex-M8 unassembled* 102 642 82°-103° 85x80x50 11x17 125<br />
* consists of 2 haunches<br />
Preassembled LW flex on request: supplement per angle 1,80 €<br />
fitting<br />
undercut anchors<br />
‚<strong>FZP</strong>‘<br />
Item-No.<br />
a<br />
anchor<br />
length<br />
spreaded<br />
drillhole-<br />
Ø mm<br />
anchor depth<br />
conncection<br />
thread<br />
b<br />
idle thread<br />
length<br />
box<br />
quant.<br />
<strong>FZP</strong> 11x12 M6/18 A4** 96 311 12 11 12 M6 18 250<br />
<strong>FZP</strong> 11x15 M6/18 A4** 60 708 15 11 15 M6 18 250<br />
<strong>FZP</strong> 13x15 M8/23 A4** 45 188 15 13 15 M8 23 250<br />
<strong>FZP</strong> 13x20 M8/23 A4** 95 815 20 13 20 M8 23 250<br />
<strong>FZP</strong> 13x15 M8W/23 A4*** 92 736 15 13 15 M8 23 250<br />
<strong>FZP</strong> 13x21 M8W/22 A4*** 45 189 21 13 21 M8 22 250<br />
** certificated Z-21.9-1275<br />
*** certificated Z-21.9-1555<br />
Price<br />
1 piece<br />
price<br />
1 piece<br />
b<br />
a<br />
Installation accessories<br />
Item-No.<br />
Material<br />
SW<br />
height<br />
DIN<br />
DIN-EN<br />
Box<br />
quant<br />
spike washer M6 49 914 A2 - 3 - - 250<br />
spike washer M8 49 915 A2 - 3 - - 250<br />
self-locking nut M6 49 916 A2 10 8,0 985 7040 250<br />
self-locking nut M8 49 917 A2 13 9,5 985 7040 250<br />
nut M6 49 918 A2 10 5,2 934 24 032 250<br />
nut M8 49 919 A2 13 6,8 934 24 032 250<br />
split pins for LW flex 102634 A2 - Ø5 x 26 1481 8752 250<br />
Loctite 2701, 10 ml 107 456 screw locking for stainless steel 1<br />
Loctite 2701, 50 ml 104 387 screw locking for stainless steel 1<br />
socket wrench with T- handle 107 459 SW 10 fitting to nut M6 1<br />
socket wrench with T- handle 107 472 SW 13 fitting to nut M8 1<br />
hammer device FZE M6 60 740 fitting to natural stone anchors <strong>FZP</strong> M6 1<br />
hammer device FZE M8 60 741 fitting to natural stone anchors <strong>FZP</strong> M8 1<br />
price 1 pc.<br />
resp.<br />
H= 100 pcs.<br />
Delivery only in full box-quantities.<br />
Prices : per piece resp. 100 pieces net plus valid VAT (for domestic trade)<br />
Terms of payment : for Germany 14 days 2 % discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery: Germany: net EUR 500 and up no delivery charge (normal delivery); deliveries abroad: ex works Waldachtal<br />
On request you receive documents and prices for drill-machines, anchor setting tools, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibercement, HPL, ceramics and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our „General Terms“.
<strong>FZP</strong> Drilling Equipments<br />
ACT Catalogue<br />
for Natural Stone and Ceramics<br />
Technical subject to change<br />
short description<br />
Mobile machine with<br />
suction pad for natural<br />
stone.<br />
VD = venturi injectors<br />
VP = vacuum pump<br />
Mobile drilling<br />
equipment for reveal<br />
fixing<br />
Mobile machine with<br />
suction disc for ceramic<br />
panels<br />
Drilling equipment for<br />
natural stone and<br />
ceramic panels<br />
(without setting tool)<br />
Drilling equipment for<br />
natural stone and<br />
ceramic panels<br />
(with setting tool)<br />
Drilling equipment for<br />
natural stone<br />
(semi automatic)<br />
Rollertables for drilling<br />
equipments as table<br />
extension for large<br />
panels<br />
mostly required<br />
panel size<br />
X/Y [cm]<br />
average<br />
monthly<br />
capacity<br />
[drills]<br />
drilling technique<br />
<br />
manual<br />
possible<br />
drilling<br />
variation<br />
<br />
Type /<br />
Specification<br />
auto-<br />
<br />
matic<br />
min. 25 x 50 - - - X - - - BSN 100 VD<br />
BSN 100 VP<br />
approx.<br />
80 x 50<br />
60 x 60<br />
(general)<br />
max.<br />
157 x 150<br />
max.<br />
157 x 150<br />
max.<br />
190 x 150<br />
for machine Type<br />
LBT 80<br />
for machine Type<br />
SBN and SBN/K 502<br />
solid construction for<br />
Machine Type GNS 800<br />
- - - X - - LBT 8000<br />
- - - X - - - BSK 200<br />
8.000 X SBN 502<br />
8.000 X SBN/K 502<br />
X<br />
Y<br />
11.000 X GNS 800<br />
X<br />
Y<br />
Table size<br />
1,0 x 1,3 m<br />
Table size<br />
84 x 48 cm<br />
Table size<br />
1,5 x 1,7 m<br />
Y<br />
X<br />
BST 80<br />
BST 500<br />
BST 800 S<br />
Price /<br />
Rent <br />
week/ month<br />
Details for one working shit and panel sizes vary only slightly<br />
Diamond drilling technique with water cooling<br />
One week is equivalent to 7 days, 1 month is equivalent to 4 weeks. Minimum settlements of accounts are at least whole<br />
weeks.<br />
Machines are drilling related to panel corner.<br />
Using moblie machines BSN 100 and BSK 200 you have to mark drill hole position first.<br />
Prices : net plus valid VAT (for domestic trade) and only valid for conventional design of machine.<br />
Exclusive installation, training and postprocessing (rental).<br />
Terms of payment : Purchase: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed. Rent: payable<br />
without deduction immediately after receipt of invoice;<br />
Installation and Training : only made by qualified personnel of <strong>fischer</strong>werke, based on <strong>fischer</strong> Travel- and Installation Rates.<br />
Terms of delivery : ex works, incl. loading, excl. packaging and insurance. After rent delivery to <strong>fischer</strong> franco domicile.<br />
A rent of an equipment will be controlled by a rental contract. Costs for machine insurance exclusive.<br />
On request you receive documents and prices for anchor setting tools and equipments, subframe systems, testing- and<br />
measuring instruments, as well as undercut anchors for natural stone, Fibercement, HPL, ceramics and glass.<br />
All based under our "General terms", Terms of Delivery of Drilling Equipments and <strong>fischer</strong> hiring conditions for drilling devices as<br />
well as the conditions of Rental contract.
Testing equipment<br />
ACT Catalogue<br />
for drill hole and anchor setting of <strong>FZP</strong>, <strong>FZP</strong>-6kt, <strong>FZP</strong>-K, <strong>FZP</strong>-N<br />
and <strong>FZP</strong>-G anchors (from left to right)<br />
Technical subject to change<br />
controlling<br />
of<br />
Name of Testing<br />
equipment<br />
suitable for drill hole/<br />
type of anchor<br />
short<br />
name<br />
item<br />
no.<br />
Price<br />
1pc.<br />
illustration<br />
cylindrical drill<br />
hole- Ø dz<br />
Diameter gauge for<br />
good-/ no good test<br />
Ø 9 mm all <strong>FZP</strong>-N anchors DPL 9 61 475<br />
Ø 11 mm all <strong>FZP</strong> anchors M6 DPL 11 61 081<br />
Ø 13 mm all <strong>FZP</strong> anchors M8* DPL 13 61 082<br />
cylindrical drill<br />
hole- Ø dz<br />
and drill hole<br />
depth hv<br />
Caliper gauge with<br />
depth indicator<br />
all <strong>FZP</strong>anchors<br />
all cylindrical diameter<br />
all drill hole depth<br />
MST 61 084<br />
Undercut- Ø<br />
dH<br />
bolt projection<br />
l<br />
fixing thickness<br />
setting torque<br />
MD<br />
Undercutminimum-volume<br />
gauge for good-/ no<br />
good test<br />
Dial gauge<br />
setting ring gauge<br />
for calibrationof dial<br />
gauge<br />
anchor setting<br />
gauge for good-/ no<br />
good test<br />
Bracket gauge for<br />
good-/ no gauge<br />
torque wrench with<br />
plug size 19 mm<br />
Range: 0,5 - 13,5<br />
Nm<br />
Ø 9 mm all <strong>FZP</strong>-N anchors HVL 9 61 474<br />
Ø 11 mm all <strong>FZP</strong> anchors M6 HVL 11 61 079<br />
Ø 13 mm all <strong>FZP</strong> anchors M8* HVL 13 61 080<br />
Ø 9 mm all <strong>FZP</strong>-N anchors STU 5-15 61 093<br />
Ø 11 mm all <strong>FZP</strong> anchors M6 STU 10-20 61 083<br />
Ø 13 mm all <strong>FZP</strong> anchors M8 STU 10-20 61 083<br />
all <strong>FZP</strong>-N anchors ESR 11,2 61 484<br />
all <strong>FZP</strong> anchors M6 and M8<br />
ESR 13,5 -<br />
15,5<br />
61 485<br />
each <strong>FZP</strong>-anchor has it’s own<br />
setting gauge.<br />
SKL<br />
e.g. <strong>FZP</strong> 13x24M8/6kt/14 AL<br />
xxxx/xx<br />
Setting gauge: SKL 1324/14 (exact <strong>FZP</strong><br />
anchor type is<br />
required)<br />
Bolt projection can be checked by use of caliper gauge MST as well<br />
only for <strong>FZP</strong>-N anchors.<br />
Bracket gauge according <strong>fischer</strong><br />
SystemOne Bracket light BRL<br />
AGL 2 61 481<br />
40-FZN<br />
all <strong>FZP</strong> anchors M6 and M8 with<br />
heagon nut size 19 mm<br />
DMS 102 863<br />
* not suitable for Glass <strong>Anchor</strong>s <strong>FZP</strong>-G<br />
Prices: per piece net plus valid VAT (for domestic trade)<br />
Terms of payment: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery: Germany: only for anchors and drill bits net EUR 500 and up no delivery charge, (normal delivery)<br />
deliveries abroad : ex works Waldachtal<br />
For drilling the holes special drilling machines are neccessary.<br />
On request you receive documents and prices for drill-machines, anchor setting tools, subframe systems, as well as other<br />
undercut anchors for natural stone, Fibercement, HPL and Glass.<br />
National regulations are always decisive and must be observed.<br />
All based under our "General terms"
<strong>FZP</strong> drilling Equipments<br />
ACT Catalogue<br />
Single modules to be integrated within existing equipments<br />
Technical subject to change<br />
Name / illustration<br />
shown with additional<br />
accessories !<br />
suitable for <strong>FZP</strong> types/ facade materials,<br />
other notes<br />
Type /<br />
Specification<br />
price<br />
1 pc.<br />
automatic drill module Type AB-N<br />
for <strong>FZP</strong>-N anchor in HPL and Fiber cement.<br />
Dimension WxHxD: 19 x 56 x 24 cm<br />
Weight: ca. 22kg<br />
for every AB-N in additional essential:<br />
SPS Control unit (plus control box)<br />
AB-N<br />
SAB-N<br />
automatic drill module Type AB<br />
automatic drill module Type AB-G<br />
for <strong>FZP</strong> anchor in natural stone and ceramic.<br />
for <strong>FZP</strong> anchor in glass.<br />
Dimension WxHxD: 25 x 110 x 38 cm<br />
Weight: ca. 130kg<br />
in additional essential:<br />
SPS Control unit for 1 AB, (100 x 100 x 30 cm)<br />
SPS Control unit for 2 AB, (100 x 100 x 30 cm)<br />
AB<br />
AB-G<br />
SAB-1<br />
SAB-2<br />
Manual drill module Type MB-1<br />
for <strong>FZP</strong> anchor in natural stone and ceramic.<br />
Dimension WxHxD: 39 x 50 x 25 cm<br />
Weight: ca. 12kg<br />
Driving motor fastened left. Motor fastened right<br />
on request. 240V with PRCD.<br />
MB-1<br />
in additonal required: target device, tools, testing and<br />
measuring instruments, flange attachment F-MB1<br />
Manual drill module Type MB-2<br />
for <strong>FZP</strong> anchor in natural stone and ceramic.<br />
Dimension WxHxD: 17 x 60 x 30 cm<br />
Weight: ca. 14kg<br />
MB-2<br />
in additional required: tools, testing and measuring<br />
instruments, flange attachment F-MB2<br />
Flange attachment Type F-MB for<br />
fixing single modules MB-1 and<br />
MB-2<br />
To be used as connecting plate to existing<br />
equipment (tie bar, extension arm, wall ...)<br />
Dimension WxHxD: 12 x 40 x 9 cm<br />
Weight: ca. 3kg<br />
8 mounting holes for screw size M8. With toothed<br />
rack.<br />
Note: design for MB-2 is with extra circuit breaker<br />
for switching water-electricity on/off<br />
F-MB1<br />
F-MB2<br />
Prices : net plus valid VAT (for domestic trade) and only valid for conventional design of machine. Without further components,<br />
add-on pieces and modifications. Exclusive installation and training.<br />
Terms of payment : for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed<br />
Terms of delivery : ex works, incl. loading, excl. packaging and insurance.<br />
Installation and Training : only made by qualified personnel of <strong>fischer</strong>werke, based on <strong>fischer</strong> Travel- and Installation Rates.<br />
A final inspection of the extensions and release has definitely made by <strong>fischer</strong>.<br />
On request you receive documents and prices for drilling equipments, anchor setting tools, subframe systems, testing- and<br />
measuring instruments, as well as undercut anchors for natural stone, Fibercement, HPL, ceramics and glass.<br />
All based under our "General terms" and Terms of Delivery for purchse of drilling Equipments.
Setting Tools and Equipments<br />
ACT Catalogue<br />
for <strong>FZP</strong> Undercutanchor in natural stone and ceramics<br />
Technical subject to change<br />
Name / illustration suitable for fixing types Type/<br />
item<br />
price<br />
1 pc.<br />
Fischer-<strong>Zykon</strong>-Hammer setting<br />
tool<br />
Battery Operated Setting Tool<br />
<strong>Anchor</strong> setting table<br />
<strong>Anchor</strong> Setting Equipment<br />
for all <strong>FZP</strong> flush fixing types M6,<br />
for all <strong>FZP</strong> flush fixing types M8,<br />
- in natural stone ‚High strength stone‘ > 3 cm<br />
- in natural stone ‚Low strength stone‘ > 4 cm<br />
for all <strong>FZP</strong> flush fixing types M6 and M8<br />
- in natural stone thickness > 2 cm<br />
consists of:<br />
Setting tool in steel case with battery charger and second<br />
battery. Inserts to change the use for M6 and M8 anchor.<br />
Rent:<br />
week / month<br />
for all <strong>FZP</strong> stand-off fixing types M6 and M8<br />
and <strong>FZP</strong> Ceramic-panel-anchor<br />
with hexagon nut across flats 19 mm<br />
- in natural stone thickness > 2 cm<br />
- in ceramics thickness > 10 mm<br />
consists of:<br />
Table size 80x100 cm with swivel arm and 1 setting tool.<br />
Torque wrench, testing- and measuring instruments, setting<br />
adapters for M6 and M8 anchor.<br />
Rent:<br />
week / month<br />
for all <strong>FZP</strong> stand-off fixing types M6 and M8<br />
and <strong>FZP</strong> Ceramic-panel-anchor<br />
with hexagon nut across flat 19mm<br />
- in natural stone thickness > 2 cm<br />
- in ceramics thickness > 10 mm<br />
consists of:<br />
Table size 130x170 cm and 2 setting tools on a tie bar.<br />
Torque wrench, testing- and measuring instruments, setting<br />
adapters for M6 and M8 anchor.<br />
Rent: week / month<br />
FZE M6<br />
60 740<br />
FZE M8<br />
60 741<br />
SGB<br />
ASV 80<br />
ASV 500<br />
Prices : net plus valid VAT (for domestic trade) and only valid for conventional design of machine.<br />
Exclusive installation, training and postprocessing (rental).<br />
Terms of payment : Purchase: for Germany 14 days 2% discount, 30 days net; outside Germany: as agreed. Rent: payable<br />
without deduction immediately after receipt of invoice.<br />
Installation and Training : only made by qualified personnel of <strong>fischer</strong>werke, based on <strong>fischer</strong> Travel- and Installation Rates.<br />
Terms of delivery : ex works, incl. loading, excl. packaging and insurance. After rent delivery to <strong>fischer</strong> franco domicile.<br />
A rent of an equipment will be controlled by a rental contract. Costs for machine insurance exclusive.<br />
On request you receive documents and prices for drill machines, subframe systems, testing- and measuring instruments, as well<br />
as undercut anchors for natural stone, Fibercement, HPL, ceramics and glass.<br />
All based under our "General terms", Terms of Delivery of Drilling Equipments and <strong>fischer</strong> hiring conditions for drilling devices as<br />
well as the conditions of Rental contract.