ANSYS FLUENT Tutorial Guide

Insert → Contour
This displays the Insert Contour dialog box.
iii. Keep the default name of the contour (Contour 2) and click OK to close the dialog box.
This displays the Details of Contour 2 view below the Outline view in CFD-Post.
iv. In the Geometry tab, select fluid in the Domains list.
v. Select symmetry in the Locations list.
vi. Select Temperature in the Variable list.
vii. Click Apply. The temperature contours are displayed in each view.
Figure 1.43 CFD-Post Displaying Temperature Contours for Both Geometries
4. Close the CFD-Post application.
5. Save the elbow-workbench project in ANSYS Workbench.
6. View the list of files associated with your project using the Files view.
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.
Setup and Solution
73