ANSYS FLUENT Tutorial Guide

Chapter 1: Introduction to Using ANSYS FLUENT in ANSYS Workbench: Fluid Flow and Heat Transfer in a
Mixing Elbow
This displays the Insert Contour dialog box.
72
ii. Keep the default name of the contour (Contour 1) and click OK to close the dialog box.
This displays the Details of Contour 1 view below the Outline view in CFD-Post. This view
contains all of the settings for a contour object.
iii. In the Geometry tab, select fluid in the Domains list.
iv. Select symmetry in the Locations list.
v. Select Velocity in the Variable list.
vi. Click Apply. The velocity contours are displayed in each view.
Figure 1.42 CFD-Post Displaying Velocity Contours for Both Geometries
c. Display filled contours of temperature on the symmetry plane.
i. Deselect the Contour 1 object under User Locations and Plots in CFD-Post to hide the first
contour display.
ii. Insert another contour object.
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.