ANSYS FLUENT Tutorial Guide

Chapter 1: Introduction to Using ANSYS FLUENT in ANSYS Workbench: Fluid Flow and Heat Transfer in a
Mixing Elbow
Figure 1.26 Velocity Distribution Along Symmetry Plane
58
e. Display filled contours of temperature on the symmetry plane (Figure 1.27 (p. 59)).
i. Click the check-marked box beside the Contour 1 object under User Locations and Plots
to deselect the Contour 1 object and hide the first contour display.
ii. Insert a contour object.
Insert → Contour
This displays the Insert Contour dialog box.
iii. Keep the default name of the contour (Contour 2) and click OK to close the dialog box.
This displays the Details of Contour 2 view below the Outline view.
iv. In the Geometry tab, select fluid from the Domains list.
v. Select symmetry in the Locations list.
vi. Select Temperature in the Variable list.
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates.