ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
i. Select Components from the Velocity Specification Method drop-down list.<br />
Note<br />
The Velocity Inlet dialog box will expand.<br />
ii. Enter 0.4 ¡ for X-Velocity.<br />
iii. Retain the default value of 0 ¢ £ for both Y-Velocity and Z-Velocity.<br />
iv. Select Intensity and Hydraulic Diameter from the Specification Method drop-down list in<br />
the Turbulence group box.<br />
v. Enter 5 for Turbulent Intensity.<br />
vi. Enter 4 inches for Hydraulic Diameter.<br />
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information<br />
of <strong>ANSYS</strong>, Inc. and its subsidiaries and affiliates.<br />
Setup and Solution<br />
39
Change language