ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Chapter 1: Introduction to Using <strong>ANSYS</strong> <strong>FLUENT</strong> in <strong>ANSYS</strong> Workbench: Fluid Flow and Heat Transfer in a<br />
Mixing Elbow<br />
( = inches, = − ¡ inches) and click it to draw the quarter-circle. If the wrong part of the<br />
arc is drawn and it does not resemble Figure 1.7 (p. 14), click Undo from the Undo/Redo<br />
toolbar and try again. Together, the arc and the two straight lines form a curving line that is<br />
the path through which the half-circle profile will be swept.<br />
14<br />
Figure 1.7 Creating the Elbow Path<br />
e. Create the pipe:<br />
i. Select the Sweep button from the 3D Features toolbar.<br />
ii. Set the Profile to be Sketch1 by clicking Sketch1 in the Tree Outline and then clicking<br />
Apply next to Profile in the Details View at the bottom-left of the screen.<br />
iii. Set the Path to Sketch2: Click Sketch2 in the Tree Outline, then click the Not selected text<br />
next to Path in the Details View and click Apply.<br />
iv. Click the Generate button to create the pipe.<br />
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information<br />
of <strong>ANSYS</strong>, Inc. and its subsidiaries and affiliates.
Change language