ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
ANSYS FLUENT Tutorial Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
. Set up the grid:<br />
i. On the Sketching tab of the Tree Outline, open the Settings toolbox, select Grid, and enable<br />
the Show in 2D and the Snap options.<br />
ii. Set Major Grid Spacing to 1 inch and Minor-Steps per Major to 2.<br />
c. Create the profile:<br />
i. Zoom in on the center of the grid so that you can see the grid lines clearly. You can do this<br />
by holding down the right mouse button and dragging a box over the desired viewing area.<br />
Release 14.0 - © SAS IP, Inc. All rights reserved. - Contains proprietary and confidential information<br />
of <strong>ANSYS</strong>, Inc. and its subsidiaries and affiliates.<br />
Setup and Solution<br />
11
Change language