Workshop Equipment

Workshop Equipment 

Quality 

Technology 

Service

For over 35 years, RODCRAFT stands for high quality, 

value-added products and services. Founded at Mülheim 

an der Ruhr, Gemany, RODCRAFT has grown steadily to 

become one of the world's leading suppliers of pneumatic 

tools and equipment in the market segments concerned. 

Our active engagement in the market and the quality of 

our products, has earned us a brand recognition level of 

over 86% in our major markets. Continously improving our 

products, services and processes, our product company 

and many customer centers are ISO 9001 and ISO 14001 

certified. We are constantly investing in our capabilities, in 

order to match our customers future demands. 

Distribution 

Training Facilities and Trade Shows 

Our customer centers and warehouse facilites are covering 

with our distributors over 80 countries worldwide on a daily 

basis. So we are close to our customers and can give a fast 

service and support. 

3D-CAD Design 

For many years, RODCRAFT's use of computer aided 3 

dimensional design (3D-CAD), has greatly shortened 

product development cycles and improves the 

communication with manufacturing. Many of our products 

feature patented designs, exclusive to RODCRAFT, such 

as our new composite sander and impact wrench series. 

Our trained technicians are able to quickly implement new 

market-driven ideas, into full-scale production models for 

modern high performance and ergonomic tools. 

Customer training and seminars are regularly held 

by our skilled staff in Germany and at our customer 

centers. 

Testing Capabilities 

Our state of the art testing 

equipment, located at our 

headoffices and in the 

service centres, is an 

integral part of our 

leadership strategy, 

supplying safe, high quality 

and performance products 

to our customers. 

RODCRAFT's international and regional trade show 

presence. 

2

Content 

www.rodcraft.com 

RODCRAFT 

page 2 

Content 

Transmission Jacks and Accessory 

Start Boosters 

Drain Pans 

Oil Collection Units , Oil Suction Units 

Creeper / Seat 

Hydraulic Straightener, Pull Clamps 

Hydraulic Ram Sets, Pneumatic-Hydraulic Pump 

Hydraulic Cylinders 

Bottle Jacks 

Jack Stands 

3 

4 - 5 

6 - 7 

8 - 9 

10 - 11 

12 - 13 

Aluminium Trolley Jacks 

Trolley Jacks for Cars 

Hydraulic Trolley Jacks and Air-hydraulic Jacks, telescopic 

for Trucks and Commercial Vehicles 

Single Wheel Dolly, Hydraulic Wheel Lift Trolley 

Hydraulic Vehicle Positioner, Motor Bridges 

Workshop Cranes and Accessory 

Motor Stands 

14 - 15 

16 - 17 

18 - 19 

20 - 21 

Workshop Presses 

22 - 23 

Accessories 

24 - 25 

Addresses 

26 - 27 

3

Transmission Jacks 

Transmission Jack, 

Fully Operated by Foot 

Hands-free operation with foot pedals 

• Universal and mobile transmission jack with hydraulic foot pump 

• Lifting by foot pump without locking at positions, hands-free 

• Foot pedal also for descent, handsfree (dead man auto-stop valve) 

• extra low, large safety chassis 

• Includes the transmission claw. 

• When inversing the claw, a saddle plate (model GHT) can be 

inserted as „mechanic‘s third arm“ in order to push up or hold 

something, i.e. the exhaust system. This plate with rubber cover is 

available as an extra accessory. 

• according to EN 292 

model 

article no. 

GH 31 8951086031 

GH 75 8951086070 

GH 31 

A 

Transmission Jack, 

Hand Valve for Lowering 

Mobile hydraulic transmission jacks 

with foot pump 

• Chromed piston rod to prevent stains 

• Precise hand valve for easy to control descent speed 

(dead man auto-stop valve) 

• Oil and acid resistant wheels 

• Includes transmission claw 

• according to EN 292 

model 

article no. 

GH 300 8951086030 

GH 500 8951086050 

A 

B 

model 

article no. capacity height [mm] weight A x B diam. piston diam. male end oil volume 

approx. 

[kg] min. max. [kg] [mm] [mm] [mm] [l] 

GH 31 8951086031 300 1230 2070 25 550 24 24 0,5 

GH 300 8951086030 300 1220 2045 28,2 625 x 605 25 30 0,5 

GH 500 8951086050 500 1245 2065 33,4 625 x 605 30 30 0,7 

GH 75 8951086070 750 1230 2050 32 650 29 24 0,7 

4

Accessory for Transmission Jacks 

Start-Booster 


Saddle Plate (mechanic’s 3rd arm) 

• „Mechanic‘s third arm“ push plate with rubber cover that 

can be inserted into the inversed claw of our transmission 

jacks models GH 31, GH 75, GH 120 and GHT 1200 

• Diameter of plate 150 mm 

Rubber Cover available as model RHA. 

GHT 

model 

article no. 

GHT 8951011034 

Start-Booter for Car / Truck Batteries 

Made in Europe 

• Mobile and handy aid for start-ups and as a portable source of energy - 2 versions available: for cars 

(12V) and for trucks (12V and 24V) - also good for boats and camping. 

• Contains modern 100% gas-proof-sealed battery cells (AGM) with high energy density and 1st-class 

manufacturing (european quality product) with long life-time. Can be used in all positions. 

• Highly flexible long cables (180cm/170cm) offer best access to the vehicle‘s battery. With large cross section (28 and 50 mm²) and professional 

solid copper clamps - externally fully insulated against unintentional 

contact - internally connected jaws (conductive band) for large conduction surfaces for high current transfer. 

• Shock-proof, easy maintenance ABS-housing with practical storage for the cables. 

• Including an automatic charger (no surcharging, booster can be kept on recharging until needed) and equipped with a cable for use on a car’s 

cigarette-lighter socket in order to recharge while driving and to recharge the vehicle‘s battery vice versa. 

• With 5 LED-indicator showing the charging state and with socket (cigarette lighter type). 

• Protecting against voltage peaks and preserves memorised data in car computers and radios etc. 

• Also under extreme temperature conditions (-40°C up to +45°C) our boosters deliver reliable energy i.e. for starting up an engine. 

BOS12-XA 

BOS1224 

12V 

3500 A.p. 

12V/24V 

3400 A.p./ 1700 A.p. 

model / article no. 

voltage 

starting current (amps peak) 

starting current (amps continuous) 

weight 

recharging capacity 

recharging voltage (net to charger) 

recharging voltage (charger to booster) 

recharging time 

cycles * 

cable cross section 

cable length 

protection against over-tension 

batteries sealed (liquid and gas) 

booster batteries 

batteries in booster 

automatically regulating charger 

recharging cable 

solid copper clamps totally insulated 

shock-proof housing ABS 

dimension booster WxTxH 

* based on discharges up to 50% 

[V] 

[A.p.] 

[A] 

[kg] 

[Ah] 

[V] 

[V] 

[h] 

[times] 

[mm²] 

[cm] 

[number] 

[Ah] 

[mm] 

BOS12-XA 

8951000062 

BOS1224 

8951089060 

12 12 24 

3500 3400 1700 

1150 700 

10,2 17,9 

1,5 (12V) 4 (12V) 

230 230 

14,9 14,9 25,2 

15 8 

500 500 

28 50 

170 170 

x 

x 

x 

x 

12V 23Ah 

12V 32Ah 

1 2 

x 

x 

x 

x 

x 

x 

x 

x 

380 x 190 x 335 385 x 290 x 355 

5

Drain Pans 

Oil Suction Units 

Drain Pans 

• 3 handles for carrying 

• Anti-splash rim 

• Made of oil and petrol resistant polyethylene (HDPE) 

B 

b 

model article no. 

P 2 8951000057 

P 46 8951000058 

Model P 2 

Model P 46 

l 

L 

H 

model 

article no. 

capacity [l] 

weight [kg] 

L [mm] l [mm] B [mm] b [mm] H [mm] 

P 2 8951000057 8 0,7 515 325 390 300 145 

P 46 8951000058 16 0,95 570 360 450 390 175 

Oil Suction Unit 

• Ergonomic Design with lightweight Composite Housing 

(only 14 kg net). 

• Mobile oil suction tool with 2 wheels 

• Easy oil removal through dipstic opening with nozzles or 

with adapter socket 

• Works indepen dantly without permanent connection to air 

supply 

• Incl. flexible nozzles 5, 6 and 8 mm and 

straight rigid nozzles 6 and 8 mm (800 mm length) 

• Direct oil removal with 3 suction adapters 

(included in delivery) 

for Mercedes-Benz, BMW and Volkswagen-VW. 

Ø 16.0 mm adapter Mercedes 

Ø 5.4 mm adapter VW Golf 

Ø 12.3 mm adapter BMW 

• Compact and handy construction easy to move because 

of wheels 

• Easy emptying of the tank using compressed air 

(max. 1.4 bar) 

NOTE: Oil should be warm for removal 

Due to fast changing car series please always check feasibility 

of oil removal through dipstick tube with/without adapters 

prior to operation. 

model 

article no. 

AK 03 8951081000 

6

Oil Collection Units 

Oil Suction Units 


Oil Collection up to 80 ltr. by Gravity 

Oil collection unit with low profile and large tank capacity 

for cars as well as small trucks. 

Tank can easily be emptied using compressed air. 

• drain pan adjustable in height 

• tank can easily be emptied using compressed air 

(equipped with safety valve) 

• very ergonomic and good to manoeuvre due to 2 wheels on 

axle and 2 swivel wheels with large diameter 

• large drain mesh in the pan, easy to reach with the hands 

• each drain pan is equipped with its own valve, so the tank can 

be emptied meanwhile an oil service or while the pan is still 

containing / collecting oil. This means oil services can be done 

in a fast frequence - 

capacity of the tank can be superceeded by using the pan 

additionally. 

NOTE: 

Oil should be warm for removal ! 

model 

article no. 

TK 05 8951081013 

model 

article no. 

tank capacity up to oil level indicator / max. capacity 

pan capacity 

max. dimension (l x w x h ) 

min. dimension (l x w x h ) 

max. dimensions (l x w x h ) with pan down on floor 

min. dimensions (l x w x h ) with pan down on floor 

height of pan (down on floor) 

dimension pan (l x w x h) 

max. pressure for emptying 

weight (empty) 

air inlet (Euronipple) 

max. Vakuum 

flow rate with flexible nozzle diam. 5 mm (oil temperature 70 - 80 °C) 



flow rate with adapter or ridgid nozzle diam. 8 mm (oil temperature 70 - 80 °C) 

unit 

l 

l 

mm 

mm 

mm 

mm 

mm 

mm 

bar 

kg 

inch 

bar 

l/min 

l/min 

l/min 

l/min 

TK 05 

8951081013 

AK 03 

8951081000 

70 / 80 19 / 24 

25 – 

470x595x1620 375x375x900 

470x595x1070 – 

x – 

x – 

x – 

Ø. 460 

0.5 5 - 6 

23 14 

– 1/4 ” 

– 0,6 - 0,7 

– 0.9 

– 1.3 

– 3.4 

– 4.8 

7

Creeper / Seat 

Hydraulic Straightener 

Foldable Creeper/Chair 

• Creeper - Chair in one, practical for various working heights 

• Creeper : for working on floor without lift (use jack stands !!) 

• Chair : for medium high working spots (fenders, doors, front area of car) 

Ergonomic design especially for tiring work Folding mechanism with 

safety lock against unintended folding 

1. Easy and stable to move on seven large wheels diameter 63 mm oil 

and acid resistant 

2. Comfortably upholstered and covered with easy to clean surfaces 

3. Ergomically favored height of seat for medium high working spots 

4. Head rest adjustable in 3 positions to give relief for the neck when 

working in awkward positions 

5. Low height when used as creeper 

6. Sturdy steel construction with black powder coating 

7. Storage area for tools, sockets, light (upholstery at feet can be folded up) 

8. capacity 90 kg 

model 

height seat min. height length width weight 

[mm] [mm] [mm] [mm] [kg] 

RSF 01 480 150 1250 450 14 

model 

article no. 

RSF 01 8951089021 

Mobile Hydraulic Straightener with 10 t Ram 

• Easy to move on oil and acid resistant plastic wheels 

• The strong 8“ 10 t hydraulic ram has sufficient 

power for toughest straightening duties. 

• Being able to tilt the pull arm sideways (up to 45° 

left and 45° right) ensures an optimum adaptation 

to the car body. 

• The hand pump can be controlled precisely in order 

to serve also for smaller or even delicate 

straightening applications. The air-hydraulic 

pump is an ideal supplement for this tool 

that will save time and reduce the 

manual effort. 

Please see page 9. 

The delivery includes: 

1x manual pump with high pressure hose (length 1.50 m), 

2x chain with length of 1.50 m (model RGS100K - 8951011083) 

with hook (model RGS100H - 8951011082) 

2x jack stand, adjustable in height 

(model RGS100UB - 8951011080) 

2x body clamp*, long type (hole diameter 75 mm) 

(model RGS100UK - 8951011084), 1x supporting pipe length 

1,80 m, diameter 74 mm (model RGS100QU - 8951011081) 

2x universal pull clamp with ring (895031593), 

1x counter support, 

complete (shark‘s fin) 

Model order no. 

RGS 100 8951089054 

RGS100QU 

RGS100UB 

RGS100UB 

* 

RGS100UK 

RGS100K 

RGS100H 

RGS100UK 

model 

article no.: A B C D E gradient weight 

[mm] [mm] [mm] [mm] [mm] º [kg] 

RGS 100 8951089054 2900 1600 600-730 0-1900 720 2 x 45º 230 

895031593 

8

Creeper 

Pull Clamps 


Creeper 

• Solid construction made of plastic 

• Extra low area at arms for more freedom 

• Upholstered head rest 

• Two easy to reach storage areas 

for parts and tools 

• 6 large oil resistant wheels for noise 

and vibration reduced moving 

• Wheels with rubber coating and swivel joint 

• capacity 90 kg 

model min. height length width weight 

[mm] [mm] [mm] [kg] 

RSF 02 115 1005 480 4,8 

model 

article no. 

RSF 02 8951089020 

Pull Clamps 

Model 

Model 

101 101 N 

one pulling 

two pulling 

direction 

directions 

Model 

Model 

Model 

102 102 N 102 NN 

asymmetric jaws, one 

pulling direction 

symmetric 

jaws, one 

pulling direction 

asymmetric 

jaws, two 

pulling directions 

Model 

301 

extra flat, 

quick chain 

hook 

Model 

402 

one pulling 

direction 

Model 

Model 

601 601 N 

one pulling two pulling directions, 

direction, extra broad 

extra broad grip, 

grip, quick chain hook 2 quick chain hooks 

chain shortener 

Model 

901 

model 

article no.: 

total length [mm] 

total width [mm] 

total height [mm] 

height of grip [mm] 

width of grip [mm] 

bolt/nut 

weight [kg] 

101 101 N 102 102 N 102 NN 301 402 601 601 N 901 

8951011064 8951011066 8951011065 8951011067 8951011068 8951011069 8951011070 8951011072 8951011073 8951011071 

225 220 240 230 240 260 180 180 180 200 

85 120 125 90 155 65 180 120 120 65 

70 45 45 35 40 80 45 70 150 65 

22 25 15 15 15 25 15 15 15 - 

40 43 35 35 35 30 45 120 120 - 

M16x70 M16x70 M14x120 M14x110 M14x110 M14x68 - M14x68 M14x68 - 

1,8 1,8 2,0 2,0 2,1 1,6 2,4 2,3 2,7 1,3 

9

Hydraulic Ram Sets 

Hydraulic Ram Set 10 t, 38 piece 

10 t push ram 

350 - 500 mm 

• Application: pulling - pushing - widening - clamping 

• Set is equipped with threaded connections (2"PT11UN) 

for pulling 

• Movable due to included trolley, light and easy to use 

• 2-step hand pump 

• Including a full set of accessories 

Accessory see page 23 

model 

article no. 

HPP 10 8951089082 

5 t pull ram 

665 - 509 mm 

Incl. 

Trolley 

Hydraulic Ram Set 17 piece 

• Application: pushing - widening - clamping 

• Quick and easy assembly because of unthreaded 

socket connections 

• 17 piece set in a durable plastic case for easy storage. 

Each piece with ist own moulded compartment to keep 

the set complete - NO LOOSE STYROFOAM MOULDS 

• Includes full set of accessories 


4 t push ram 

268 - 388 mm 

10 t push ram 

320 - 450 mm 

(without figure) 

(see figure) 

model 

article no. 

HRS 04 (4 t) 8951089083 

HRS 10 (10 t) 8951089074 

Hydraulic Ram Set 20 piece 

• Application: pushing - clamping 

• All accessories in steel with threaded 

connections 

• For transport companies and truck 

repair centres 

• 2-step hand pump for 700 bar working 

pressure 

• Stored in 2 durable metal boxes 

• Including full set of accessory 

• 130 mm stroke of hydraulic cylinder 

• Hose length 1500 mm (pump/cylinder) 

20 t push ram 

280 - 410 mm 

model 

article no. 

HRS 20 (20 t) 8951089081 


10

Pneumatic-Hydraulic Pump 

Hydraulic Cylinders 


set model stroke cylinder 

[mm] 

diameter cylinder / ø with 

rubber cap [mm] 

diameter piston 

[mm] 

min. length 

[mm] 

max. length 

[mm] 

oil volume 

cylinder / pump [l] 

max. pressure 

[bar] 

HRS 04 120 40 / 44 25 268 388 0.4 / 0.4 700 

HRS 10 130 56,5 / 63 40 320 450 0.5 / 0.5 700 

HRS 20 130 90 60 280 410 0.9 / 0.9 700 

HPP 10 150 57 38 350 500 0.5 / 0.5 700 

model-article no. 

HRZ05B 

8951089080 

HKZ12B 

8951089084 

HRD02 

8951089075 

CYLINDERS APPLICABLE 

pulling and pushing cylinders, hollow cylinders and spreaders 

HRD10 

8951089079 

10-03 

8951012038 

110 03C 

8951012011 

111-03D 

8951011995 

112-02 

8951012014 

111 04 

8951011980 

10-04 

8955510788 

_ 

HRD10K 

8951089078 

HRD10F 

8951089077 

HRD04F 

8951089076 

PUMPS 

within 

set 

model no. article no. set 

PHP 10 8951011063 

10 - 01 8951012036 HPP 10 

111 - 01 8951011978 HRS 10 

112 - 01 8951012013 HRS 20 

110 - 01 8951011997 HRS 04 

- - RGS100 

Pneumatic-hydraulic Pump 

HPP 10 

HPP 10 

HRS 04 

HRS 10 

• • • • • • • • • • • • 

• • • • • • • • • • 

• • • • • • • • • • • 

• • 

• • • • • • 

• • • • • • • • • • • • 

• combination possible 

HRS 20 

HRS 10 

HRS 04 

HPP 10 

RGS100 

• Convenient and easy to handle, 

operation by hand or foot 

• 1-step silenced pump with high performance 

• Ideal in combination with large rams like HRS 10 

and dozer RGS 100 

• Maximum hydraulic pressure 700 bar 

• Oil capacity 0.7 l, hydraulic high pressure hose 

length 1,5 m 


PHP 10 8951011063 

Pull Ram 

Push Ram 

• Pullling force 5 t 

• Stroke 156 mm 

• Thread on cylinder 1/4“ 

• Length maximum 665 mm (including hook) 

• Pushing force 10 t 


• Length minimum 463 mm 

• Thread on cylinder 1/4“ female 

model article no. model article no. 

HRZ 05 8951089080 HRD 10 8951089079 

Push Ram, flat 

• Pushing force 4 t / 10 t 

• Stroke 15 mm / 10 mm 

• Min. height 42,2 / 42 mm 

• Length min. 65 mm / 83 mm 

• Width 45 mm / 58 mm 

• Thread on cylinder ¼“ 


HRD 04 F 8951089076 

HRD 10 F 8951089077 

Push Ram 




• With threaded extention bar 50 mm 



HRD 02 8951089075 

Push Ram, short 

Hollow piston hydraulic cylinder 


• Hydraulic stroke 50 mm 


• Height minimum 145 mm 

• Hydraulic stroke 41 mm 

• Hole in piston 19.5 mm 




• Pulling and pushing with one cylinder possible e.g. for pulling of threaded rods, bolts 

etc. but also for production of motors - with threaded extension 

• Piston treated by salt bath nitriding for better resistance against corrosion and equipped 

model article no. with exchangeable saddle plate (ring) 


HRD 10 K 8951089078 HKZ 12 8951089084 

11

Bottle Jacks 

Hydraulic Bottle Jacks with Threaded Extention 

Welded design – 

no leaks 

The hydraulic system with mounted manual pump is powerful, compact, 

versatile, clean. 

• maximum capacity and durability, because of double guidance 

• 100% seal, robust and easy to disassembly, by automatic welded construction 

• high standing and stability, due to large base plate 

• vertically and horizontally applicable, as long as the pump points upwards ! 

• fast and easy adaptable in the height, per threaded extension within piston) 

• with safety valve against overloading 

• steel piston made of one piece for extra durability 

• practically to stowage, handle on pump consists of two parts to assemble/disassemble 

Tested according to DIN 76024 

MGN 2 

MGN 3 MGN 5 

MGN 8 

MGN 12 

MGN 20 

MGN 30 

model 

article no. 

MGN 2 

8951000009 

MGN 3 

8951000010 

MGN 5 

8951000011 

MGN 8 

8951000012 

MGN 12 

8951000013 

MGN 20 

8951000014 

MGN 30 

8951000015 

capacity 

weight [kg] 2,4 2,9 3,8 5,8 6,7 9,1 18,3 

A (min) [mm] 180 190 200 200 180 185 285 

A+B (max) [mm] 305 325 340 320 275 280 455 

C (+thread) [mm] 55 65 60 80 75 35 / 

D [mm] 360 390 400 400 350 315 455 

E [mm] 110 115 130 150 165 180 190 

F [mm] 20 70 75 90 105 120 140 

G [mm] 20 23 29 35 43 53 62 

12 

[t] 2 3 5 8 12 20 30

Jack Stands 


Jack Stands 

• welded, sturdy steel tube construction, strutted and easy to carry (16 t jacks made of solid steel struts with plate in the middle). 

• good standing stability since each foot is equipped with a broad plate. 

• massive steel stem with 1,5 t models and jack stands with fine adjustment by threaded spindle ergonomic steel tube stem for easier 

carrying on other jack stands with large bolt on chain and safety clamp 

• full choice of various heights, capacities, partly equipped with finely adjustable threaded stems. The program comprises 

the whole automotive section and partly also the truck and bus equipment. 

USBN5.0 finely adjustable with rubber protector on top UBN5-GT (Art. Nr. 889108) especially suited for vans and busses 

with sheet metal bodies and low clearance. 

TÜV* and GS* approved safety and long time experience. 

USB 1.5 

USB 1.5 H 

USB 3 

USB 5 

USBN 5.0 

USB 8 

USB 12 G 

USB 8 H 

USB 12 HG 

USB 16 H 

model 

article no. 

USB1.5* 

8951085010 

USB 1.5 H* 

8951085011 

USB 3* 

8951085030 

USB 5* 

8951085050 

USBN 5* 

8951085051 

USB 8* 

8951085080 

USB 8 H* 

8951085081 

USB12G* 

8951085120 

USB12HG* 

8951085121 

USB16 H 

8951085161 

capacity 

weight 

min. height 

max. height 

stroke 

[t] 

[kg] 

[mm] 

[mm] 

[mm] 

1,5 

2,2 

260 

405 

145 

1,5 

3,6 

430 

700 

270 

3 

3,8 

320 

530 

145 

5 

5,0 

370 

580 

210 

5 

4,3 

245 

350 

95 

8 

7,9 

385 

600 

215 

8 

11,4 

580 

950 

370 

12 

10,6 

345 

515 

170 

12 

14,4 

475 

730 

255 

16 

19,5 

430 

725 

295 

positions in height 5 5 5 5 direct 5 6 direct direct 5 

13

Aluminium Trolley Jacks 


Hydraulic Trolley Jacks - Made of Alloy for Cars 

• The ideal jack for taking into the trunk for break-down service, ralley support and service on 

the spot for customers - for instance to change to winter tyres at the customer 

• short 2 piece handle bar 

• sufficient capacity for lifting also good for normal passenger vehicles 

(Please note that 1300 kg = 1,5 Amercan Short Tons !) 

• ergonomic net weight and for an easy transport the jacks are equipped with carrying 

handle(s) - RH135: 1 handle, RH201: 3 handles. 

• fast stroke RH135: with 11 pump strokes up to the max. – without load ! 

RH201: with double pump 

• saddle plate protection with rubber cover 

• lever with protective sponge to prevent scratches on car bodies. 

only 10,5 kg 

only 20,5 kg 

1,3 t 

80 - 295 mm 

RH 135 

2 t 

85 - 460 mm 

RH 201 

for technical specifications see page 13 

Small Hydraulic Trolley Jacks 

• pump lever can be disassembled (2 piece) 

for easy storage and transport 

model RH290: 

with quick lifting pedal for fast approach 

Accessory 

Model C 225 / RHA 

Rubber cover diameter 

137 mm (C 225) for RH 290 

150 mm (RHA) for RH 225 


C 225 8951011092 

RHA 8951011033 

2,25 t 

3 t 

Model STRH 

Steel saddle with vulcanised 

rubber top diameter 123 mm 

for RH225, RH290, RH251, RH301, RH501 

120 - 490 mm 

145 - 510 mm 

Model article no. 

STRH 8951011093 

RH 225 

RH 290 

30 mm 

14



Hydraulic Trolley Jacks up to 3 t 

• Hydraulic trolley jacks with sturdy steel construction for daily workshop use. 

• With precise hand valve for lowering 

• Equipped with smooth oil and acid resistant plastic wheels 

• Long pedal for fast approach and quick lifting of smaller loads 

• Pump lever with protector sponge * to prevent paint scratches / 

Pump lever with T-end ** for two-handed operation with valve on the lever top. 

Model RH151 low profile jack with extra long body to get very deep under a vehicle up 

to 515 mm at a height of only 80 mm, typical for some sports cars and old timers. Compact when disassembled with 2 piece pump lever for 

easy transport and storage. 

Model RH 215 versatile car trolley jack with low profile and large final height (75 - 505 mm), fast lifting stroke due to two pump pistons and 

ergonomic foot pedal. Compact when disassembled with 2 piece pump lever for easy transport and storage. 

Model RH 251 high lifter up to 800 mm max. 

Model RH 301 powerful jack also well suited for vans. The front wheels are easy to position when pressing slightly onto the foot plate at 

the rear side of the jack. 

1,5 t 

80 - 620 mm 

RH 151 

RH 151 

80 mm 

515 mm 

RH 151 

2 t 

75 - 505 mm 

RH 215 RH 215 

295 mm 

80 mm 

RH 215 

2 t 

135 - 800 mm 

RH 251 

RH 301 

* ** 

3 t 

115 - 605 mm 

model article no. capacity dimension (mm) weight 

[t] A B C D D 2 E F G [kg] 

RH 135* 8951082025 1,3 295 80 375 505 1440 130 235 235 10,5 

RH 151* 8951000051 1,5 620 80 540 920 2140 153 282 382 50,5 

RH 201* 8951000003 2 375 85 460 695 1820 155 285 320 20,5 

RH 251** 8951082024 2 665 135 800 1340 2100 190 295 430 58 

RH 215* 8951082026 2 430 75 505 750 1960 150 270 375 39,4 

RH 225 8951082020 2,25 370 120 490 655 1670 170 260 350 38 

RH 290 8951082031 3 365 145 510 650 1650 160 275 350 41,5 

RH 301** 8951082032 3 490 115 605 1320 2440 190 245 315 70 

B: with saddle 

15

Hydraulic Trolley Jacks and Air-hydraulic Jacks 


Hydraulic Trolley Jacks for Trucks 

• All equipped with quick lifting pedal for 

fast approach. 

• Hydraulic system with pump lever allows 

autonomous operation 

without compressed air 

Model RH 501: 

easy to position due to foot rest on back (turning on the spot). Lever 

can be blocked in 3 angles for storage and positioning deeply under a 

low vehicle. Grease nipples on all important joints. 

5 t 

Model RH 310 

with LCS lowering control system for slow descent 

even when heavily charged. "Dead man control" auto-stop valve. 

RH 501 

10 t 

RH 310 

model article no. capacity dimension (mm) weight 

[t] A B C D D 2 E F G [kg] 

RH 501 8951082050 

RH 310 8951082100 

5 530 150 680 1420 2560 205 290 360 95 

10 430 175 605 1600 2550 270 380 410 123 

B: with saddle 

Air-Hydraulic Jacks for Trucks and Heavy Vehicles 

Models LHH with one piece solid piston 

Models LHHT with telescopic piston (up to 4 telescopic elements) 

for low clearance 

• Oil and acid resistant wheels 

• Easy to move and to position 

• Large rest plate for safe and stable lifting 

• Handle can be locked in 3 angles, control valve on handle 

• With auto-stop safety valve, overload control and 

safety valve against hose breakage and air supply interruption 

435 mm 488 mm 

325 mm 368 mm 

20 t 32 t 

210 mm 255 mm 

LHH 22 LHH 35 

Models LHH22 / LHH35: 

• Short and compact version, very easy to manoeuvre 

• Overload control and safety valve against undesired 

descent in case of interruption of the air supply 

• Including clearance adapters: with broad saddle 

diameter 68 mm and height 20 mm / with diameter 

48 mm and heights 20 mm / 60 mm / 100 mm 

• The piston is retracted by 4 springs that are easy 

accessible 

• Including an integrated threaded extension 

(length 110 / 120 mm) 

• With front handle for easier carrying 

• CE certified 

• Air supply pressure needs to be 7 - 10 bar, 

air consumption 300 l/min 

• According to EN 292 

one-piece, solid 

lifting piston 

20 t 32 t 

one-piece, solid 

lifting piston 

LHH 22 LHH 35 

16 

for technical specifications see page 15

Air-hydraulic Jacks, telescopic 



Air-Hydraulic Jacks, Telescopic for Trucks and Heavy Vehicles 

Telescopic jacks, ideal for servicing trucks, buses and construction site vehicles 

• fast and easy lifting / lowering – controlled from the handle Instead of manual power, the jacks are air powered 

(air-hydraulic pump) and “remote”-controlled from the handle with a joy stick. 

• manoeuvring with ease, deep under a vehicle The long handle bar and the control panel at the end on the grip allow 

pushing the jack far under the suspension. The handle bar locks in 3 positions. 

• automatic stop-valve (dead man) For safety the jack stops all movement automatically when the joy stick is released. 

• 3 extension adapters / saddle plate Due to a hole and bolt construction they can be stacked – good for extremely high 

axles. All adapters can be properly stored for transport in a pocket on each side of the jack. 

• carrying handle on the cylinder for transport 

• soft rubber wheels – silent, smooth to the floor. 

Safety at work : lifted loads need to be secured by a mechanical mean, RODCRAFT 

jack stands are the ideal accessory to our jacks. 

30 t max. 

50 t max. 

Low Clearance 

Large Stroke 

Extensions 

LHHT30-2 

LHHT50-3 

d l d l d l 

d 50 mm d 50 mm d 70 mm 

l 10 mm l 60 mm l 120 mm 

d 50 mm d 50 mm d 70 mm 

l 10 mm l 45 mm l 75 mm 

F2: 370 mm 

10 t 

F2: 300 mm F2: 280 mm 

15 t 25 t 

F1: 220 mm 

F1: 220 mm 

30 t 50 t 

A: 155 mm 

A: 155 mm 

LHHT 30-2 

LHHT 50-3 

LHHT 30-2 

LHHT 50-3 

model article no. capacity dimension (mm) weight air consumption 

[t] A B C D D+E E F G P [kg] 

[l/min] 

LHHT30-2 8951000007 30/15 155 165 290 360 465 105 F1/F2 1300 68/20 48 340 

LHHT50-3 8951000008 50/25/10 155 180 230 525 660 135 

F1/F2/ 

F3 

1300 68/20 63 340 

LHH22 8951084201 20 210 205 320 330 430 - 325 1200 50 49 300 

LHH35 8951084350 32 255 250 330 510 610 - 368 1200 50 54,5 300 

operating air pressure : 7- 10 bars 

17

Single Wheel Dolly 

Hydraulic Wheel Lift Trolley 

Single Wheel Dolly 250 kg 

Sturdy and handy assembly aid for various types of wheels (for trucks, vans and cars). 

• adjustable arms for various wheel sizes (width 29 – 62 cm) 

• equipped with rollers for easy positioning of wheels onto the vehicle’s stud bolts or holes in the brake disk. 

• with stop rollers on the rear side that avoid pushing the wheel onto the frame 

• ergonomic handle with rounded and soft safety grip 

• for best adaptation to any user the handle is adjustable in its length (3 positions) 

• max. capacity 250 kg 

model 

article no. 

RHW1 89510 89091 

Hydraulic Wheel Lift Trolley 

• Application: quick and easy disassembly and assembly of truck 

wheels and wheel sets, with or without brake drum. Easy 

loading and transport to or from the lathe, tyre mounting 

machine or axle. 

• 2 swivel front wheels and 2 fixed rear wheels facilitate moving and 

precise positioning of the lift in order to avoid damage to axle bolts 

(no more tapping for repair of bolts needed) 

• Saves time and contributes to safety and worker‘s health (spine) 

• Practical foot pedal for lowering the lifted wheels (dead man auto-stop valve) 

• Sturdy chassis made of square steel bars with max. capacity 700 kg 

• Retaining arms can be adjusted sideways for small wheels as well as wheel sets 

• Each loaded wheel rests stable and can still be turned individually when loaded because 

of 2 broad chromed rollers on each retaining arm. 

• Oil and acid resistant heavy duty wheels with large diameter 

• Partly foldable and legs can be taken off for storage an easier transport in service cars 

• The asymmetrically installed hydraulic unit on one side offers enough space to get access to the wheel 

hub and bolts even for 1“ impact wrenches etc. 

• Hydraulic construction for less maintenance in contrast to chain/roller construction 

RHW 702 

model article no capacity weight oil stoke dimension [mm] height of lifting arms [mm] 

[kg] [kg] l [mm] 

a min / a max b min / b max c d 

oben 

unten 

RHW 702 8951089046 700 130 0,6 525 480 / 750 1150 / 1400 990 1000 105 630 

between rollers 

b, c, d: external dimensions 

upper limit of rollers 

18

Hydraulic Vehicle Positioner 

Motor Bridges 


Hydraulic Vehicle Positioner 

• For easy positioning of cars - moving in all directions also side 

ways and turning on the spot - ideal for use in confined areas. 

(e.g. workshops, show rooms, parking buildings, exhibitions, 

studios - for heavyly damaged vehicles and when the 

motor / gear was disassembled etc., as well as for locked and 

blocked cars) 

• Simple to use with foot pedal (less tiring than manual systems) 

• Some pedal strokes are sufficient to pull the arms together 

and lift the wheel. 

• Less effort due to easy moving hydraulic power. 

• The wheel is lowered again when turning the valve knob 

(also for setting the tool in the mechanical blocking position 

releasing the hydraulic pressure) 

• Robust hydraulic system instead of high maintenance 

mechanical mechanism (no regreasing of gears etc.). 

• Good for tyres up to a width of 300 mm and a diameter of 650 mm 

• Weight 18 kg 

• Capacity 600 kg (each) 

model 

article no. 

RG 600 8951089045 

Transmission and Motor Repair Bridge 

Delivery includes one chain with 2 hooks 

• Capacity 400 kg 

• For cars with motors built lengthwise or crosswise 

• Instantaneous set up on the vehicle even when positioned asymmetrically on the car 

• Quick and easy positioning of the motor for trouble-free fitting or removal of the transmission 

• Well balanced load because of 2 spindles 

• Galvanised 

• Certified chains and hooks according to norm DIN EN 818 part2 available, see accessories. 

model 

article no. 

MGM 1 8951089066 

model article no capacity distance between feet stroke of height w/o spindle weight 

spindles spindle thread 

[kg] min. [mm] max. [mm] [mm] [mm] [kg] 

MGM 1 8951089066 400 1100 1600 265 200 M 14 14,8 

19

Workshop Cranes 

Accessory for Workshop Cranes 

Workshop Crane, foldable, one person operation possible 

• Equipped with auto-stop safety valve 

• Extra low height of the legs and wheels i.e. even driving under a 

Europallet is possible in order to pick up a load from there 

• Very compact because of foldable front wheel legs 

• Easy to position over load due to 2 fixed wheels at front and 2 swivel 

wheels at rear end, oil and acid resistant quality 

• Hoist arm with 3 positions of extension 

• Swivel pump and swivel pump lever for best access to the pump 

and operation of the pump from the work place 

• Lifting of the arm by pumping up and down from the work place 

• Lowering of the arm by pushing the lever up and backwards - 

meanwhile the precise control and positioning of the load is possible 

with the other free hand 


WK 51 KM 8951080050 

WK 201 KM 8951080200 

Model 

order no. 

capacity [kg] 

according to the position of extension 

weight 

P1 P2 P3 P4 [kg] 

WK 51 K 8951080050 500 400 325 – 92 

WK 102 K 8951080101 1000 750 500 250 77,5 

WK 201 KM 8951080200 2000 1750 1650 - 173 

Model 

order no. 

dimension in mm 

A E G J K L M P S R min R med R max 

WK 51 K 8951080050 1400 1970 2080 1500 820 970 80 465 450 1050 1150 1250 

WK 102 K 8951080101 1560 1920 2120 1480 825 935 160 430 440 960 1060 1160 / 1230 

WK 201 KM 8951080200 1720 2340 2500 1900 1035 1160 200 635 570 1275 1420 1570 

Motor / Load Positioner 

• For Assembly and Disassembly of e.g. motors, using a workshop crane 

• Chain flange can be attached to the motor. The chains are hooked 

on one side into the flanges and on the other into the MP 500 at 

appropriate length 

• By turning the crank the hook-up ring is shifted sideways which 

tilts the load in order to obtain correct positioning for assembly / 

disassembly 

• Certified chains and hooks according to norm DIN EN 818 part2 

available, see accessories. 

technical specifications: 

Capacity 500 kg 

Width 655 mm 

Height 205 mm 

Length of chain 1030 mm 


MP 500 8951089050 

20

Workshop Cranes 

Motor Stands 


Workshop Crane, foldable, one person operation possible 

• Very compact because of foldable front wheel legs 

• Due to its large capacity of 1 ton and the adjustable 

lifting arm (4 positions) this crane is very versatile for 

optimum garage use. 

• With double effect hydraulic pump that can be operated 

from standing at the side of the crane including a „dead 

man“ auto-stop valve. 

• Additional small wheels for moving the crane also easily 

when folded up. 

• with oil and acid resistant wheels, the rear wheels swivel, 

the front wheels are fixed. 

• The lifting arm can be extended in 4 positions 

model 

article no. 

WK 102K 8951080101 

Motor Stand 

• Universal aid for more ergonomic work on motors for 

assemblies, disassemblies and repairs. 

• Improves ergonomy when working on motors due to its 

comfortable working height 

and the swivelling fixation plate 

(360°, can be locked every 60°) 

• Capacity 500 kg 

• Net weight 29 kg 

• Dimension: length 900 mm x width 785 mm, height 980 mm 

• Centre height of the suspension plate: 910 mm 

• The motor suspension arms can be adjusted from a minimum 

radius of 310 mm up to a maximum radius of 435 mm 

• At the end of each suspension arm bolts can be fixed 

through the pipe shaped end of the arm into the motor 

(bolt length approx. 60 mm, max. thread M14) - 

bolts are not included in the delivery 

model 

article no. 

MMB 500 8951089048 

21


Bench Press 

Slim Presses up to 30 t, 

manual only 

Hydraulic Workshop Press 

With manual hydraulic pump 

• Piston with threaded extention 75 mm 

for fast adaptation to smaller clearances 

due to varying sizes of work pieces 

• Robust, steel construction 

• Self-retracting hydraulic piston 

• Sturdy frame structure with holes for 

adjustment of the anvil table 

• Delivery includes anvil table / 

V-suspension / pressure gauge 

• With perforated shelf on press table for 

storage of press bolts. 

• Set of 3 press punches and 1 quick 

change chuck for punches not included 

but available as extra accessory 

WPB 15 HM 

Hydraulic Press, short version for use on workshop 

bench With manual hydraulic pump 

• Piston with threaded extention 75 mm for fast 

adaptation to smaller clearances due to varying 

sizes of work pieces 



• Sturdy frame structure with holes for adjustment of the 

anvil table 

• Delivery includes anvil table / V-suspension / 

pressure gauge 

• With perforated shelf on press table for storage of 

press bolts. 

• Set of 3 press punches and 1 quick change chuck for 

punches not included but available as extra accessory 


WPB 15 HM 8951087150 

WPSK 15 HM 

Model WPSK 15 FP and WPSK 30 FP 

with pneumatic-hydraulic pump with 

foot switch (pedal) allows fast 

operation and hands-free 

operation in order to be able 

to hold and control the work 

piece when pressing 

Model WPSK 30 HM 

with two manual pumps 

(fast approach, powerful pressing) WPSK 30 HM 

model 

article no. 

WPSK 15 HM (15 t) 8951087152 

WPSK 30 HM (30 t) 8951087302 

WPSK 15 FP (15 t) 8951087151 

WPSK 30 FP (30 t) 8951087301 

for technical specifications see page 21 

Quick-Exchange Chuck, 

individual 

Press Punches, individual 

Quick exchange 

chucks for press 

punches for 

RODCRAFT 

presses WPB... 

and WPS... 

10 mm 

19 mm 

24 mm 

Press punches for SWAM 15 and SWAM 30-50 

model article no. model article no. 

15 t SWAM 15 8951011058 10 mm DO 10 8951011053 

30-50 t SWAM 30-50 8951011059 

19 mm DO 19 8951011054 

24 mm DO 24 8951011055 

Sets of Press Bolts with Quick-Exchange Chuck 

30,5 mm 

30,5 mm 

24 mm 

30,5 mm 

Set of 

1 quick-exchange chuck and 

3 press bolts (10 / 19 / 24 mm) 

for presses 15 t / for presses 30 - 50 t 


15 t SWAM 15+DO 8951011060 

30 t/50 t SWAM 30-50+DO 8951011061 

10 mm 

19 mm 

22



Slim Presses up to 30 t, 

manual with air-hydraulic pump support 

Large Presses up to 50 t, 

manual with air-hydraulic pump support 

Hydraulic Workshop Press 

With air-hydraulic pump and 

additional manual hydraulic pump 

WPSK 30 FP 

• Piston with threaded extention 

75 mm for fast adaptation to 

smaller clearances due to varying 

sizes of work pieces 



• Sturdy frame structure with holes 

for adjustment of the anvil table 

• Delivery includes anvil table 

(can beifted by winch) / V-suspension / 

pressure gauge 

• Cylinder can be shifted sideways by 

250 mm for precise positioning even on 

asymmetric work pieces 

• With perforated shelf on press table for 

storage of press bolts. 

• Set of 3 press punches and 1 quick 

change chuck for punches not included 

but available as extra accessory 

Models HPV: 

with hand activated, 

air-hydraulic pump for fast 

hydraulic power without effort 

Models FPV: 

with foot activated, 

air-hydraulic pump for fast hydraulic 

power without effort - the hands are free 

to help positioning the work piece 

All presses are additionally equipped with a 

manual pump for precise low press 

applications. 

model 

WPS 30 HPV 8951087300 

WPS 30 FPV 8951087303 

WPS 50 HPV 8951087500 

WPS 50 FPV 8951087501 

WPS 50 FPV 

article no. 

with pedal-activated air-hydraulic pump 

with pedal-activated air-hydraulic pump 

dimens. 

[mm] 

description 

WPB15HM WPSK15HM 

WPSK15FP 

WPSK30HM 

WPSK30FP 

WPS30HPV 

WPS30FPV 

WPS50HPV 

WPS50FPV 

Capacity [t] 15 15 30 30 50 

A 

[mm] 605 605 670 880 880 

B [mm] 420 650 650 650 650 

C [mm] 940 1650 1750 1770 1810 

D 

[mm] 120 120 120 145 145 

E 

[mm] 500 500 550 710 710 

G1 

[mm] 150 150 180 145 145 

G2 [mm] 450 600 630 600 600 

R1 [mm] 95 95 120 120 120 

R2 [mm] 75 75 75 75 75 

R [mm] 170 170 195 195 195 

M [mm] -- -- -- 250 250 

V öl 

[l] 0,75 1,1 1,1 1,1 1,1 

G 

[kg] 77 89 137 202 220 

air supply pressure: 7 bar air consumption: 270 l/min air inlet thread: 1/4“ male thread 

23

Accessories 

article no. model description for model 

8951089071 MGM 3L K+H chain 1,4 m with 2 hooks 

MGM 3L 

8951089072 SIK safety chain 1,4 m DIN EN 818T2 1500kg MGM 1, MGM 3L, MP 500 

8951089073 SIH safety hook 

MGM 1, MGM 3L, MP 500 

8951011048 AK3-SFL5 nozzle/tube, 5 mm flexible 

AK02, AK03, AK05, TK09B, TK09BL 





8951011032* AK-5/0,9 F nozzle/tube, 5 mm flexible 


8951011044 AK-3ADB adapter for Mercedes Ø 16,0 mm 

AK03 

8951011028* AK-5 A1 adapter for Mercedes / Volkswagen Ø 16,0 mm AK02, AK03, AK05, TK09B, TK09BL 

8951011045 AK-3ABMW adapter for BMW Ø 12,3 mm 


8951011043 AK-3AVW adapter Volkswagen-Golf Ø 5,4 mm 


8951011029* AK-5 SA adapter for female socket of nozzles/tubes TK09B,TK09BL 

02 02 

03 03 

04 04 

01 01 

29 29 

21 21 

10 10 

05 05 06 06 07 07 

08 08 

11 11 09 09 

13 13 

14 14 12 12 

16 16 

17 17 

19 19 

15 

18 

25 15 

18 

25 

23 23 

22 22 

20 20 

24 24 

28 28 

26 26 27 27 

pos. article no. model description for model 

01 

02 

03 

04 

05 

06 

07 

08 

09 

10 

11 

12 

13 

14 

15 

16 

17 

18 

19 

20 

21 

22 

23 

24 

25 

26 

27 

28 

29 

8951012036 10-01 hand pump, 2-step 

HPP 10 

8951012037 10-02 

hose and coupling 

8951012038 10-03 

push ram 10 t 

8951011980 111 04 

spreader 0,5 t 

8951012039 10-05 

extension pipe 635 mm 

8951012040 10-06 


8951012041 10-07 


8951012042 10-08 


8951012043 10-09 

thread piece, outer thread 

8951012044 10-10 

plate 

8951012045 10-11 

prisma piec 

8951012046 10-12 

wedge piece, sharp 

8951012047 10-13 

push foot for piston 

8951012048 10-14 

push foot for cylinder 

8951012049 10-15 

rubber Ø 83 mm 

8951012050 10-16 

thread piece, inner thread length 53 mm 

8951012051 10-17 

protection for piston 

8951012052 10-18 

bolt 

8951012053 10-19 

pull ring 

8951012054 10-20 

pull hook 

8951012062 10-21B pipe holder for hydraulic ram 

8951012055 10-22 

pipe holder for cylinder 

8951012056 10-23 

spring spreader toe 

8951012063 10-24B chain piece, yoke 

8951012057 10-25 

push foot for piston, reinforced 

8951012058 10-26 

pull clamp 

8951012059 10-27 

pull clamp 

8951012060 10-28 

chain with one hook 

8951089080 HRZ05B pull cylinder 5 t, chromed 

8951011993 R 1115 

coupling for cylinder or spreader 

8951011994 P 21 

nipple for high pressure hose 

24

Accessories 


15 

10 

14 

01 

16 

12 

08 

02 

04 

07 

09 

11 

13 

05 

06 

17 

03 

03 


01 

02 

03 

04 

05 

06 

07 

08 

09 

10 

11 

12 

13 

14 

15 

16 

17 

01 

02 

03 

04 

05 

06 

07 

08 

09 

10 

11 

12 

13 

14 

15 

16 

17 

8951011997 110 01 pump, hydraulic 1-step, 4 t HRS 04 

8951011998 110 02 high pressure hose 1500 mm 

8951012011 110 03C push ram 4 t 

8951011980 111 04 spreader 0,5 t 

8951011999 110 05 extension pipe 400 mm 




8951012003 110 09 adapter pipe 

8951012004 110 10 protection piece 

8951012005 110 11 plate 

8951012006 110 12 prisma piece 

8951012007 110 13 wedge piece, sharp 

8951012008 110 14 push foot piston 

8951012012 110 15C push foot cylinder 

8951012009 110 16 rubber 

8951012010 110 17 tool box 

8951011993 R 1115 coupling for cylinder or spreader (1/4”AG) 

8951011994 P 21 nipple for high pressure hose 

8951011978 111 01 pump, hydraulic 1-step, 10 t HRS 10 

8951011979 111 02 high pressure hose 1500 mm 

8951011995 111 03D push ram 10 t (1/4“ NPT ram-coupling) 

8951011980 111 04 spreader 0,5 t 





8951011985 111 09 adapter pipe 

8951011986 111 10 protection piece 

8951011987 111 11 plate 

8951011988 111 12 prisma piece 

8951011989 111 13 wedge piece, sharp 

8951011990 111 14 push foot piston 

8951011996 111 15D push foot cylinder 

8951011991 111 16 rubber 

8951011992 111 17 tool box 

8951011993 R 11 15 coupling on ram (1/4“ AG) 

8951011994 P 21 nipple for high pressure hose 


01 

(A) 

8951012013 112 01 pump, hydraulic 2-step HRS 20 

02 

12 

08 

01 

06 

07 

16 

17 

03 

04 

05 

14 13 

15 

09 10 11 

02 

03 

04 

05 

06 

07 

08 

09 

10 

11 

(B) 

(C) 

(C) 

(C) 

(C) 

(B) 

(B) 

(B) 

(A) 

(A) 

8951012014 112 02 

8951012015 112 03 

8951012016 112 04 

8951012017 112 05 

8951012018 112 06 

8951012019 112 07 

8951012020 112 08 

8951012021 112 09 

8951012022 112 010 

8951012023 112 011 

push ram 20 t (3/8“ NPT ram-coupling) 





lock pin 

connector, male thread 

connector, female thread 

plunger base 

ram base 

12 

(B) 

8951012024 112 012 

toe lift 

13 

(B) 

8951012025 112 013 

V-head 

14 

(B) 

8951012026 112 014 

wedge head 

15 

(B) 

8951012027 112 015 

serrated saddle 

17 

(A) 

8951012029 112 017 

high pressure hose 

25

Addresses 

RODCRAFT in Central Europe 

Germany 

Austria 

Switzerland 

Belgium 

Netherlands 

Sales 

RODCRAFT Central Europe 

Langemarckstraße 35 

45141 Essen 

Germany 

phone: 

fax: 

email: 

+49 (0)201 21 77 781 

+49 (0)201 21 77 788 

info@rodcraft.com 



45141 Essen 

Germany 

phone: 

fax: 

email: 

+49 (0)201 21 77 781 

+49 (0)201 21 77 788 




45141 Essen 

Germany 

phone: 

fax: 

email: 

+49 (0)201 21 77 781 

+49 (0)201 21 77 788 




45141 Essen 

Germany 

phone: 

fax: 

email: 

0 800 791 27 * 

0 800 763 75 * 




45141 Essen 

Germany 

phone: 

fax: 

email: 

0 800 02 21 610 ** 

0 800 02 21 709 ** 


Service 

Rodcraft Service Center 

W. Valentin GmbH & Co. KG 

Gewerbeschulstraße 99 – 103 

42289 Wuppertal 

Germany 

phone: 

fax: 

email: 

+49 (0)202 25 59 8-0 

+49 (0)202 25 59 8-19 

info@valentin-service.de 


Pixner GmbH & Co KG 

Robingstr. 9a 

A-5020 Salzburg 

Austria 

phone: 

fax: 

email: 

(0662) 88920-0 

(0662) 88920-28 



Intool AG 

Hinterbergstrasse 30 

CH- 6330 Cham 

Switzerland 

phone: 

fax: 

email: 

+41 (0)41 748 07 00 

+41 (0)41 748 07 01 

mail@intool.ch 

RODCRAFT Service Center 

Industrielaan 44 

BE-3730 Hoeselt 

Belgium 

phone: 

fax: 

email: 

0 800 791 28 * 

0 800 791 33 * 





Belgium 

phone: 

fax: 

email: 

0800 02 21 571 ** 

0800 02 21 724 ** 


Luxemburg 

RODCRAFT in South West Europe 



45141 Essen 

Germany 

phone: 

fax: 

email: 

+49 (0)208 21 77 729 

+49 (0)208 21 77 792 





Belgium 

phone: 

fax: 

email: 

+32 89 51 07 86 

+32 89 51 07 89 


26 

France 

Italy 

Spain 

Portugal 

RODCRAFT France 

38 rue Bobby Sands, ZAC de la Lorie BP10273 

44818 SAINT HERBLAIN CEDEX 

France 

phone: 

fax: 

email: 

+33 (0)240 808 909 

+33 (0)240 80 20 19 

info.france@rodcraft.com 

RODCRAFT Italy 

Viale della Repubblica, 65 

20851 Lissone (Milano) 

Italy 

phone: 

fax: 

email: 

+39-0 10 5 76 52 70 

+39-0 10 5 76 53 35 

vendite@homberger.com 

RODCRAFT Spain 

Avenida Industria, 9, Polígono Industrial Alcobendas 

28100 Alcobendas 

Spain 

phone: 

fax: 

+34 91 590 31 52 

+34 91 590 31 61 

RODCRAFT Portugal 

Avenida Industria, 9, Polígono Industrial Alcobendas 

28100 Alcobendas 

Spain 

phone: 

fax: 

+34 91 590 31 52 

+34 91 590 31 61 

RODCRAFT Service Après Vente 

ARM 

57, route de Bray 

77130 Marolles-sur-Seine 

France 

phone: 

fax: 

email: 

01 64 31 24 36 

01 60 96 76 06 

infosarm@armrepar.fr 

RODCRAFT Servizio Clienti 

Homberger SPA 

Via Ippolito d'aste, 1/1 

16121 Genova (GE) 

Italy 

phone: 

fax: 

email: 

+39-0 10 5 76 52 70 

+39-0 10 5 76 53 35 

officina@homberger.com 

* number valid from and in Belgium 

** number valid from and in the Netherlands


Addresses 


RODCRAFT in Eastern Europe 

Albania, Bosnia, 

Herzigovina, 

Bulgaria, Croatia, 

Hungaria, 

Macedonia, 

Montenegro, 

Romania, Serbia, 

Slovakia, Slovenia 

RODCRAFT Eastern Europe 

Chemická 4 

831 04 Bratislava 

Slovakia 

phone: 

fax: 

email: 

+421 264 462 636 

+421 264 463 464 

info.slovakia@rodcraft.com 

Poland 

Czechia 

phone: 

fax: 

email: 

phone: 

fax: 

email: 

+48 22 720 96 10 

+48 22 720 96 15 

info.poland@rodcraft.com 

+420 225 434 152 

+420 225 434 131 

info.czech@rodcraft.com 

RODCRAFT in the UK and Ireland 

RODCRAFT in Nordic 

United 

Kingdom, 

Ireland 

RODCRAFT UK 

37 Mark Road, Hemel Hempstead 

Herts 

United Kingdom 

phone: +44 (0)1442 838 999 

fax: +44 (0)1442 838 989 

email: rc.ukinfo@rodcraft.com 

Denmark, 

Finland, 

Iceland, 

Norway, 

Sweden, 

Estonia, 

Lithuania, 

Latvia 

RODCRAFT Nordic 

Kville 18 

SE-450 Fjällbacka 

Sweden 

phone: 

fax: 

+46 (0) 525 352 55 

+46 (0) 525 350 93 

RODCRAFT in Russia 

RODCRAFT in the Middle East 

Belarus, 

Russia, 

Ukraine 

RODCRAFT Russia 

15, Vashutinskoe road 

Khimki, Moscow region 

141402 

Russia 

phone 

fax: 

+7 495 933 5553 

+7 495 933 5557 

Middle East 

RODCRAFT Middle East 

P.O. Box 122778, Plot 368/471, Warehouse No. 2, 

Hasa Road, Street 8, Al Quoz Industrial Area 3 

Dubai 

United Arab Emirates 

phone: 

fax: 

+9714 7040271 

+971 50 6610828 

+9714 7040294 

RODCRAFT in India 

RODCRAFT in South Africa 

India 

RODCRAFT India 

2nd Floor, RUSHABH, Near American Heart Institute 

Ghodbunder Rd 

Manpada, THANE (West) - 400607 

India 

phone: 

fax: 

+91 22 39 98 27 31 

+91 98 33 48 91 64 

+91 22 39 98 27 25 

South Africa 

RODCRAFT South Africa 

Hughes Business Park, 

Saligna Street, Witfield, Gauteng, 

1459 

South Africa 

phone: 

fax: 

+27(0) 11 437 6932 

+27(0) 11 437 6933 

+27(0) 11 388 1672 

A broad range of 

products for garages, 

industry and craftsmen 

Druckluftwerkzeuge 

Werkstatt-Ausstattung 


Qualität 

Technik 

Service 

Qualität 

Technik 

Service 

Air tools 

and accessory 

Workshop 

cranes, hydr. presses, jacks, 

oil service tools etc. 

For fast information, news, 

downloads of product 

information, spare part 

information, manuals. 


© RODCRAFT 20111215 T.G. 

RODCRAFT follows a policy of continuous product improvement. Specifications and descriptions are thus subject to change without notice. 

Check the online ecatalogue at www.rodcraft.com for the latest product information. 

27

Hydraulic Cranes 

Bottle Jacks 

Presses 

Pumps 

Oil Service 

Jack Stands 

Battery Booster 

Transmission Jacks 

Motor Positioner 

Motor Bridges 

Trolley Jacks 

Accessories 

Hydraulic Ram Cylinders 

Your Dealer 

order no. 8956010006 - KWSE 2012-01

Workshop Equipment

Create successful ePaper yourself

Delete template?

Save as template?