Gear pumps for compounding - Pump Solutions Group
Gear pumps for compounding - Pump Solutions Group
Gear pumps for compounding - Pump Solutions Group
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PELLET DRYERS<br />
Drying in an energy-saving way<br />
Drying the pellets right after production is primarily to simplify<br />
transportation and storage of the pellets. Moist pellets<br />
generate quality-related problems. For an economical<br />
downstream pellet process after cutting, either the AERO<br />
or the CENTRO dryers (depending on the particular situation)<br />
are available <strong>for</strong> virgin polymer drying. The AERO<br />
impact dryer dries the plastic pellets very gently, whereas<br />
the CENTRO centrifugal dryer features reduced energy<br />
consumption and very moderate space requirements.<br />
CENTRO<br />
Centrifugal dryer<br />
Technical data:<br />
Sizes: 300 / 800 / 1,600 / 2,200 / 4,000<br />
Throughput rate:<br />
Advantages:<br />
Up to 40,000 kg/h<br />
• Low energy consumption<br />
• Good access <strong>for</strong> cleaning and maintenance<br />
• Integrated water separator<br />
• Agglomerate separator<br />
AERO<br />
Impact dryer<br />
Technical data:<br />
Sizes: 500 / 800 / 1,000<br />
Throughput rate:<br />
Advantages:<br />
Up to 15,000 kg/h<br />
• Very gentle drying process<br />
• Minimal moisture on the pellet surface<br />
• Quick-change screen elements<br />
• Integrated water separator<br />
16