Microplate Barcode Labeler User Guide - Agilent Technologies

More documents

Recommendations

Info

$Sophisticated peak-based fraction collection – working with up and ...$

82 Chapter 4: Setting up the VCode VCode User Guide Selecting a profile You can select a profile that has already been created. You would do this if you have more than one VCode on the network and you want to open a connection to a different VCode. To select a profile: 1. In the Device Selection group box of PlateTag, make sure that an Ethernet-based profile is selected if you are connecting using Ethernet or a serial-based profile is selected if you are connecting using serial. 2. Select View > Diagnostics. The plate stage moves to the home position and the VCode Diagnostics dialog box opens after a few seconds. 3. Click the Profiles tab. 4. If you are connecting with a serial communications cable: a. Select Serial from the Select a profile list box. b. Select the This VCode is connected on button, and from the list box select the COM port to which you connected the serial cable. 5. If you are connecting with an Ethernet communications cable: a. Click Select VCode. The BioNet Devices Discovered screen opens. b. If you have more than one network card in your computer, make sure that it is selected in the Select the Ethernet adapter... list box. c. Select the VCode with which you want to communicate.. d. Click OK. Related information For more information about... Creating a profile The Select a profile list box See... “Creating a profile to add a VCode” on page 79 “About the Select a profile list box” on page 79
Chapter 5: Creating label formats for printing VCode User Guide 83 5 Creating label formats for printing This chapter describes how to: ❑ Create a label format ❑ Run a print test to check the format
Page 1 and 2:
Microplate Barcode Labeler User Gui
Page 3:
Agilent Technologies Letter to our
Page 6 and 7:
ii Table of Contents VCode User Gui
Page 8 and 9:
iv Table of Contents VCode User Gui
Page 10 and 11:
2 Chapter 1: Introduction VCode Use
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
10 Chapter 2: VCode orientation VCo
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
26 Chapter 3: Installing the VCode
Page 36 and 37:
Page 38 and 39:
Page 40 and 41: 32 Chapter 3: Installing the VCode
Page 66 and 67: 58 Chapter 4: Setting up the VCode
Page 68 and 69: . 60 Chapter 4: Setting up the VCod
Page 92 and 93: 84 Chapter 5: Creating label format
Page 108 and 109: 100 Chapter 5: Creating label forma
Page 116 and 117: 108 Chapter 6: Running a print job
Page 120 and 121: 1 2 3 4 5 6 7 8 9 10 11 12 A B C D
Page 140 and 141:
132 Chapter 6: Running a print job
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
140 Chapter 7: Using the VCode’s
Page 150 and 151:
Page 152 and 153:
. 144 Chapter 7: Using the VCode’
Page 154 and 155:
Page 156 and 157:
. 148 Chapter 7: Using the VCode’
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
156 Chapter 8: VCode ActiveX VCode
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
172 Index VCode User Guide file loc
Page 182 and 183:
174 Index VCode User Guide Rotate18
Page 184:
176 Index VCode User Guide
show all

Microplate Barcode Labeler User Guide - Agilent Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?