Microplate Barcode Labeler User Guide - Agilent Technologies

More documents

Recommendations

Info

$Sophisticated peak-based fraction collection – working with up and ...$

78 Chapter 4: Setting up the VCode VCode User Guide 9. Insert the allen wrench into the right-hand set screw labelled DOWN and turn clockwise to raise the stage and counter-clockwise to lower the stage. Raise or lower the stage with the goal of aligning the top edges of the suction cups with the top edge of the plate. 10. Test the alignment by extending the suction cups, and repeat the adjustment as necessary. 11. When you think the adjustment is correct, click Rotate head to return the head to face the printer. 12. Click the Stage setup tab and click Home Stage to home the plate stage. 13. Applying a label manually to see where it is positioned on the plate, and make adjustments as necessary.
Chapter 4: Setting up the VCode VCode User Guide 79 Creating a profile to add a VCode Introduction Every VCode on a network requires a profile. The provided “serial” or “ethernet” profile can be used for the first VCode, but for each additional VCode you will need to create an additional profile. This is true whether the VCodes are controlled by PlateTag , VWorks or BenchWorks . This topic explains how to create a profile, and when to make the physical connection to the network. Adding VCodes to another company’s system If you are using another company’s lab automation system and want to set up additional VCodes, discuss this option with your system’s design engineers. Profiles are features of Velocity11 software and may not have an exact equivalent in another company’s system. About the Select a profile list box When working with profiles, you use the Select a profile list box. It is important to note that the profile displayed in the list box is unrelated to the profile that is currently being used to communicate with a VCode. This is a common cause of confusion. For example, to have a successful serial connection to a VCode the value in the list box does not have to be the default “serial” profile or any other serial profile that you have created. It could be the default “ethernet” profile. The value bears no relation to the current connection. The value in the Select a profile list box only has meaning at the time a profile is created, renamed, deleted, or selected. At these times, the list box associates a particular VCode (through the COM port number or IP address) with a profile. Creating and initializing a profile To create a profile: 1. In the Device Selection group box of PlateTag, make sure that an Ethernet-based profile is selected if you are connecting using Ethernet or a serial-based profile is selected if you are connecting using serial. 2. In PlateTag, select View > Diagnostics. The VCode Diagnostics dialog box opens after a few seconds and the plate stage moves. 3. Click the Profiles tab. 4. Click Create new profile. The text New profile #x appears in the list box.
Page 1 and 2:
Microplate Barcode Labeler User Gui
Page 3:
Agilent Technologies Letter to our
Page 6 and 7:
ii Table of Contents VCode User Gui
Page 8 and 9:
iv Table of Contents VCode User Gui
Page 10 and 11:
2 Chapter 1: Introduction VCode Use
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
10 Chapter 2: VCode orientation VCo
Page 20 and 21:
Page 22 and 23:
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
26 Chapter 3: Installing the VCode
Page 36 and 37: 28 Chapter 3: Installing the VCode
Page 66 and 67: 58 Chapter 4: Setting up the VCode
Page 68 and 69: . 60 Chapter 4: Setting up the VCod
Page 92 and 93: 84 Chapter 5: Creating label format
Page 108 and 109: 100 Chapter 5: Creating label forma
Page 116 and 117: 108 Chapter 6: Running a print job
Page 120 and 121: 1 2 3 4 5 6 7 8 9 10 11 12 A B C D
Page 136 and 137:
128 Chapter 6: Running a print job
Page 138 and 139:
Page 140 and 141:
Page 142 and 143:
Page 144 and 145:
Page 146 and 147:
Page 148 and 149:
140 Chapter 7: Using the VCode’s
Page 150 and 151:
Page 152 and 153:
. 144 Chapter 7: Using the VCode’
Page 154 and 155:
Page 156 and 157:
. 148 Chapter 7: Using the VCode’
Page 158 and 159:
Page 160 and 161:
Page 162 and 163:
Page 164 and 165:
156 Chapter 8: VCode ActiveX VCode
Page 166 and 167:
Page 168 and 169:
Page 170 and 171:
Page 172 and 173:
Page 174 and 175:
Page 176 and 177:
Page 178 and 179:
Page 180 and 181:
172 Index VCode User Guide file loc
Page 182 and 183:
174 Index VCode User Guide Rotate18
Page 184:
176 Index VCode User Guide
show all

Microplate Barcode Labeler User Guide - Agilent Technologies

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?