Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
56<br />
Chapter 3: Installing the VCode<br />
VCode <strong>User</strong> <strong>Guide</strong><br />
Passing data<br />
through the firewall<br />
If your organization insists that a firewall should remain on, it is possible<br />
to configure the firewall to allow data that is transmitted on a particular<br />
port to pass through.<br />
If you are using dynamic IP addresses the firewall should pass data<br />
though on UDP ports 67 and 7611.<br />
If you are using static IP addresses, the firewall should pass data though<br />
on UDP port 7611.<br />
For help configuring the firewall, consult an experienced network<br />
administrator.<br />
Installing VCode software<br />
Introduction<br />
After connecting the air tubing and power cable, and setting up the<br />
network between the computer and the VCode, you can install the<br />
software.<br />
Procedure<br />
The installation wizard on the VCode software CD-ROM installs both<br />
PlateTag and VCode Diagnostics.<br />
To install PlateTag and VCode Diagnostics:<br />
1. In Windows, navigate to the CD-ROM drive.<br />
2. Navigate to the software > PlateTag folder.<br />
3. Double-click setup.exe.<br />
The installation wizard opens.<br />
4. Follow the wizard’s instructions, selecting the Complete setup<br />
option.