Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
52<br />
Chapter 3: Installing the VCode<br />
VCode <strong>User</strong> <strong>Guide</strong><br />
!! IMPORTANT !! If you do not do this, you will not be able<br />
to communicate with the VCode using PlateTag or VCode<br />
Diagnostics over a serial connection.<br />
8. Select File > Exit.<br />
!! IMPORTANT !! If you do not close HyperTerminal<br />
correctly, the serial connection will remain open, preventing<br />
you from using another serial device on the same port, such<br />
as the bar code reader configuration harness.<br />
9. In the HyperTerminal dialog box, click Yes.<br />
You now have the option of saving the connection parameters so<br />
that you do not have to enter them the next time you want to<br />
connect.<br />
10. Click Yes in the HyperTerminal dialog box to save the parameters.<br />
Automatically<br />
assigning the<br />
IP address<br />
If your VCode has been set up with a manually assigned IP address and<br />
you now want to use it in a network with a DHCP server, follow the<br />
procedure for manually assigning the address, but enter 0 in place of the<br />
IP address.<br />
Related information<br />
For more information about...<br />
The general process for manually<br />
setting the VCode’s IP address<br />
See...<br />
“About manually setting the VCode’s<br />
IP address” on page 47