Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Microplate Barcode Labeler User Guide - Agilent Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 2: VCode orientation<br />
VCode <strong>User</strong> <strong>Guide</strong><br />
17<br />
❑ Events, which are notifications that methods are complete or have<br />
errors<br />
Networking<br />
The ActiveX commands are converted into a format that can be carried<br />
over serial or Ethernet network cables and sent to the VCode’s firmware.<br />
The profile that you select in PlateTag, VWorks or BenchWorks sets the<br />
communication parameters and determines whether serial or Ethernet<br />
communication is used. By using an Ethernet switch you can<br />
communicate with more than one VCode. You can communicate with<br />
more than one VCode using serial cables if you have more than one<br />
serial connector (COM port), if you use a USB to serial adapter, or if you<br />
use a multiport serial adapter.<br />
Related information<br />
For more information about...<br />
The ActiveX methods, events and<br />
properties used to control the<br />
VCode from third-party software<br />
Setting up a network<br />
Using the VCode as a stand-alone<br />
instrument<br />
See...<br />
“VCode ActiveX” on page 155<br />
“Choosing between a serial or Ethernet<br />
network” on page 34<br />
“Use as a stand-alone unit” on page 10